Akamai Technologies, Inc. v. MediaPointe, Inc. et al
Filing
62
STIPULATED PROTECTIVE ORDER by Magistrate Judge Alexander F. MacKinnon re Stipulation for Protective Order 61 . See document for details. (es)
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 1 of 37 Page ID #:3012
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Michael J. Summersgill (pro hac vice)
michael.summersgill@wilmerhale.com
Jordan L. Hirsch (pro hac vice)
jordan.hirsch@wilmerhale.com
WILMER CUTLER PICKERING
HALE AND DORR LLP
60 State Street
Boston, Massachusetts 02109
T: (617) 526-6000 / F: (617) 526-5000
Arthur W. Coviello (SBN 291226)
arthur.coviello@wilmerhale.com
WILMER CUTLER PICKERING
HALE AND DORR LLP
2600 El Camino Real, Suite 400
Palo Alto, California 94306
T: (650) 858-6069 / F: (650) 858-6100
Meng Xi (SBN 280099)
mxi@susmangodfrey.com
Thomas V. DelRosario (SBN 236264)
tdelrosario@susmangodfrey.com
Justin Kenney (pro hac vice)
jkenney@susmangodfrey.com
SUSMAN GODFREY L.L.P.
1000 Louisiana, Suite 5100
Houston, Texas 77002-5096
T: (713) 651-9366/F: (713) 654-6666
Counsel for Plaintiff, Akamai
Technologies Inc. [Additional Counsel
Listed on Signature Block]
Counsel for Defendant and
Counterclaimant, MediaPointe, Inc.
and Defendant AMHC, Inc.
16
UNITED STATES DISTRICT COURT
CENTRAL DISTRICT OF CALIFORNIA
WESTERN DIVISION
17
18
19
Kalpana Srinivasan (SBN 237460)
ksrinivasan@susmangodfrey.com
SUSMAN GODFREY L.L.P.
1900 Avenue of the Stars, Suite 1400
Los Angeles, California 90067-6029
T: (310) 789-3100 / F: (310) 789-3150
AKAMAI TECHNOLOGIES, INC.,
Case No. 2:22-cv-06233- MCS-AFM
20
Plaintiff and Counterclaim
Defendant,
21
STIPULATED PROTECTIVE
ORDER
22
23
24
25
26
27
v.
MEDIAPOINTE, INC. AND AMHC,
INC.,
Defendants and
Counterclaimant.
28
1
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 2 of 37 Page ID #:3013
1
WHEREAS, Plaintiff and Counterclaim Defendant Akamai Technologies,
2
Inc. (“Akamai”) and Defendants and Counterclaimant MediaPointe, Inc. and
3
AMHC, Inc. (collectively “MediaPointe”) (Plaintiff and Defendants each a “Party,”
4
and collectively, the “Parties”) believe that certain information that is or will be
5
encompassed by discovery demands by the Parties involves the production or
6
disclosure of trade secrets, confidential business information, or other proprietary
7
information;
8
9
WHEREAS, the Parties seek a protective order limiting disclosure thereof in
accordance with Federal Rule of Civil Procedure 26(c):
10
THEREFORE, it is hereby stipulated among the Parties and ORDERED
11
that:
12
1.
A.
PURPOSES AND LIMITATIONS
13
Discovery in this action is likely to involve production of confidential,
14
proprietary or private information for which special protection from public
15
disclosure and from use for any purpose other than prosecuting this litigation may
16
be warranted. Accordingly, the parties hereby stipulate to and petition the Court to
17
enter the following Stipulated Protective Order. The parties acknowledge that this
18
Order does not confer blanket protections on all disclosures or responses to
19
discovery and that the protection it affords from public disclosure and use extends
20
only to the limited information or items that are entitled to confidential treatment
21
under the applicable legal principles.
22
B.
23
This action is likely to involve trade secrets, customer and pricing lists and
24
other valuable research, development, commercial, financial, technical and/or
25
proprietary information for which special protection from public disclosure and from
26
use for any purpose other than prosecution of this action is warranted. Such
GOOD CAUSE STATEMENT
27
28
2
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 3 of 37 Page ID #:3014
1
confidential and proprietary materials and information consist of, among other
2
things, confidential source code, confidential technical documentation and
3
information, confidential business or financial information, information regarding
4
confidential business practices, or other confidential research, development, or
5
commercial information (including information implicating privacy rights of third
6
parties), information otherwise generally unavailable to the public, or which may be
7
privileged or otherwise protected from disclosure under state or federal statutes,
8
court rules, case decisions, or common law. Accordingly, to expedite the flow of
9
information, to facilitate the prompt resolution of disputes over confidentiality of
10
discovery materials, to adequately protect information the parties are entitled to keep
11
confidential, to ensure that the parties are permitted reasonable necessary uses of
12
such material in preparation for and in the conduct of trial, to address their handling
13
at the end of the litigation, and serve the ends of justice, a protective order for such
14
information is justified in this matter. It is the intent of the parties that information
15
will not be designated as confidential for tactical reasons and that nothing be so
16
designated without a good faith belief that it has been maintained in a confidential,
17
non-public manner, and there is good cause why it should not be part of the public
18
record of this case.
19
20
C.
ACKNOWLEDGMENT OF PROCEDURE FOR FILING UNDER
SEAL
21
The parties further acknowledge, as set forth in Section 12.3, below, that this
22
Stipulated Protective Order does not entitle them to file confidential information
23
under seal; Local Civil Rule 79-5 sets forth the procedures that must be followed
24
and the standards that will be applied when a party seeks permission from the court
25
to file material under seal.
26
“RESTRICTED
27
CONFIDENTIAL SOURCE CODE,” or “PRIVACY DATA” by any party, as
-
Any information designated “CONFIDENTIAL,”
ATTORNEYS’
EYES
28
3
ONLY,”
“RESTRICTED
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 4 of 37 Page ID #:3015
1
discussed below, will be deemed “information previously designated as
2
confidential” within the meaning of Local Rule 79-5 unless the Court rules
3
otherwise.
4
There is a strong presumption that the public has a right of access to judicial
5
proceedings and records in civil cases. In connection with non-dispositive motions,
6
good cause must be shown to support a filing under seal. See Kamakana v. City and
7
County of Honolulu, 447 F.3d 1172, 1176 (9th Cir. 2006), Phillips v. Gen. Motors
8
Corp., 307 F.3d 1206, 1210-11 (9th Cir. 2002), Makar-Welbon v. Sony Electrics,
9
Inc., 187 F.R.D. 576, 577 (E.D. Wis. 1999) (even stipulated protective orders require
10
good cause showing), and a specific showing of good cause or compelling reasons
11
with proper evidentiary support and legal justification, must be made with respect to
12
Protected Material that a party seeks to file under seal. The parties’ mere designation
13
of Disclosure or Discovery Material as CONFIDENTIAL does not — without the
14
submission of competent evidence by declaration, establishing that the material
15
sought to be filed under seal qualifies as confidential, privileged, or otherwise
16
protectable — constitute good cause.
17
Further, if a party requests sealing related to a dispositive motion or trial, then
18
compelling reasons, not only good cause, for the sealing must be shown, and the
19
relief sought shall be narrowly tailored to serve the specific interest to be protected.
20
See Pintos v. Pacific Creditors Ass’n, 605 F.3d 665, 677–79 (9th Cir. 2010). For
21
each item or type of information, document, or thing sought to be filed or introduced
22
under seal in connection with a dispositive motion or trial, the party seeking
23
protection must articulate compelling reasons, supported by specific facts and legal
24
justification, for the requested sealing order. Again, competent evidence supporting
25
the application to file documents under seal must be provided by declaration.
26
Any document that is not confidential, privileged, or otherwise protectable in
27
its entirety will not be filed under seal if the confidential portions can be redacted.
28
4
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 5 of 37 Page ID #:3016
1
If documents can be redacted, then a redacted version for public viewing, omitting
2
only the confidential, privileged, or otherwise protectable portions of the document,
3
shall be filed. Any application that seeks to file documents under seal in their
4
entirety should include an explanation of why redaction is not feasible.
5
Producing Confidential Information (defined in Section 2.3 below) imposes a
6
substantial burden and a risk of disclosure of trade secrets. See, e.g., Fed. R. Civ. P.
7
26(c)(1)(G).
8
Confidential Information to no more than is reasonably necessary to prosecute or
9
defend against the specific claims alleged in this Action. The Parties agree that,
10
consistent with Federal Rule of Civil Procedure 34, all requests for Confidential
11
Information will describe the requested discovery material with reasonable
12
particularity. The parties agree to meet and confer in good faith to narrow the scope
13
of requested discovery of Confidential Information to what is reasonably necessary
14
to prosecute or defend against the specific claims alleged in this Action.
Therefore, the Parties shall limit their discovery requests for
15
The parties shall only include Protected Material (defined in Section 2.14
16
below) in filings with the Court to the extent that it is reasonably necessary for the
17
Court to decide a disputed issue, including by filing only the relevant excerpts of
18
documents designated as Protected Material. See L.R. 79-5.2.2. If a Party files
19
excessive Protected Material of another Designating Party that is not reasonably
20
necessary for the Court to decide a disputed issue, the Designating Party reserves all
21
rights to seek relief, including to petition the clerk of court to remove or return any
22
unnecessarily filed Protected Material or to move the Court to strike such
23
unnecessarily filed Protected Material.
24
2.
DEFINITIONS
25
2.1.
Action: this pending federal lawsuit.
26
2.2.
Challenging Party: a Party or Non-Party that challenges the designation
27
of information or items under this Order.
28
5
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 6 of 37 Page ID #:3017
1
2.3.
“CONFIDENTIAL” Information or Items: information (regardless of
2
how it is generated, stored or maintained) or tangible things that qualify for
3
protection under Federal Rule of Civil Procedure 26(c), and as specified above in
4
the Good Cause Statement. “CONFIDENTIAL” information includes information
5
designated with a more restrictive category, including “RESTRICTED -
6
ATTORNEYS’ EYES ONLY,” “RESTRICTED CONFIDENTIAL SOURCE
7
CODE,” or “PRIVACY DATA.”
8
9
10
2.4.
Counsel: Outside Counsel of Record and House Counsel (as well as
their support staff).
2.5.
Designating Party: a Party or Non-Party that designates information or
11
items that it produces in disclosures or in responses to discovery as
12
“CONFIDENTIAL,”
13
“RESTRICTED CONFIDENTIAL SOURCE CODE,” or “PRIVACY DATA.”
14
2.6.
“RESTRICTED
-
ATTORNEYS’
EYES
ONLY,”
Disclosure or Discovery Material: all items or information, regardless
15
of the medium or manner in which it is generated, stored, or maintained (including,
16
among other things, testimony, transcripts, and tangible things), that are produced or
17
generated in disclosures or responses to discovery in this matter.
18
2.7.
Expert: a person with specialized knowledge or experience in a matter
19
pertinent to the litigation who has been retained by a Party or its counsel to serve as
20
an expert witness or as a consultant in this Action, including support staff. Both
21
experts, and any of their support staff who actively review any materials marked
22
RESTRICTED
23
CONFIDENTIAL SOURCE CODE” for the purpose of helping that expert form an
24
opinion in this case, are subject to the requirements of Section 7.2(c) below.
25
2.8.
-
ATTORNEYS’
EYES
ONLY”
or
“RESTRICTED
House Counsel: attorneys who are employees of a party to this Action.
26
House Counsel does not include Outside Counsel of Record or any other outside
27
counsel.
28
6
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 7 of 37 Page ID #:3018
1
2
2.9.
Non-Party: any natural person, partnership, corporation, association or
other legal entity not named as a Party to this action.
3
2.10. Outside Counsel of Record: attorneys who are not employees of a party
4
to this Action but are retained to represent or advise a party to this Action and have
5
appeared in this Action on behalf of that party or are affiliated with a law firm that
6
has appeared on behalf of that party, and includes support staff.
7
2.11. Party: any party to this Action, including all of its officers, directors,
8
employees, consultants, retained experts, and Outside Counsel of Record (and their
9
support staffs).
10
11
2.12. Producing Party: a Party or Non-Party that produces Disclosure or
Discovery Material in this Action.
12
2.13. Professional Vendors: persons or entities that provide litigation support
13
services (e.g., photocopying, videotaping, translating, preparing exhibits or
14
demonstrations, and organizing, storing, or retrieving data in any form or medium)
15
and their employees and subcontractors.
16
2.14. Protected Material:
any Disclosure or Discovery Material that is
17
designated as “CONFIDENTIAL,” “RESTRICTED - ATTORNEYS’ EYES
18
ONLY,” “RESTRICTED CONFIDENTIAL SOURCE CODE,” or “PRIVACY
19
DATA.”
20
2.15. Receiving Party: a Party that receives Disclosure or Discovery Material
21
from a Producing Party.
22
3.
SCOPE
23
The protections conferred by this Stipulation and Order cover not only
24
Protected Material (as defined above), but also (1) any information copied or
25
extracted from Protected Material; (2) all copies, excerpts, summaries, or
26
compilations of Protected Material; and (3) any testimony, conversations, or
27
presentations by Parties or their Counsel that might reveal Protected Material.
28
7
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 8 of 37 Page ID #:3019
1
Any use of Protected Material at trial shall be governed by the orders of the
2
trial judge, rather than this Order. Subject to any challenges under Section 6, below,
3
the Parties will not oppose any reasonable request by the Producing Party that the
4
courtroom be sealed, if allowed by the Court, during the presentation of any
5
testimony, evidence, or argument relating to or involving the use of any Protected
6
Material.
7
4.
DURATION
8
Once a case proceeds to trial, information that was designated as
9
CONFIDENTIAL or maintained pursuant to this protective order used or introduced
10
as an exhibit at trial becomes public and will be presumptively available to all
11
members of the public, including the press, unless compelling reasons supported by
12
specific factual findings to proceed otherwise are made to the trial judge in advance
13
of the trial. See Kamakana, 447 F.3d at 1180-81 (distinguishing “good cause”
14
showing for sealing documents produced in discovery from “compelling reasons”
15
standard when merits-related documents are part of court record). Accordingly, the
16
terms of this protective order do not extend beyond the commencement of the trial.
17
5.
18
DESIGNATING PROTECTED MATERIAL
5.1.
Exercise of Restraint and Care in Designating Material for Protection.
19
Each Party or Non-Party that designates information or items for protection under
20
this Order must take care to limit any such designation to specific material that
21
qualifies under the appropriate standards. The Designating Party must designate for
22
protection only those parts of material, documents, items or oral or written
23
communications that qualify so that other portions of the material, documents, items
24
or communications for which protection is not warranted are not swept unjustifiably
25
within the ambit of this Order.
26
Mass, indiscriminate or routinized designations are prohibited. Designations
27
that are shown to be clearly unjustified or that have been made for an improper
28
8
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 9 of 37 Page ID #:3020
1
purpose (e.g., to unnecessarily encumber the case development process or to impose
2
unnecessary expenses and burdens on other parties) may expose the Designating
3
Party to sanctions.
4
If it comes to a Designating Party’s attention that information or items that it
5
designated for protection do not qualify for protection, that Designating Party must
6
promptly notify all other Parties that it is withdrawing the inapplicable designation.
7
5.2.
Manner and Timing of Designations. Except as otherwise provided in
8
this Order (see, e.g., second paragraph of section 5.2(a) below), or as otherwise
9
stipulated or ordered, Disclosure or Discovery Material that qualifies for protection
10
under this Order must be clearly so designated before the material is disclosed or
11
produced.
12
13
Designation in conformity with this Order requires:
(a)
for information in documentary form (e.g., paper or electronic
14
documents, but excluding transcripts of depositions or other pretrial proceedings),
15
that the Producing Party affix, at a minimum, the legend “CONFIDENTIAL,”
16
“RESTRICTED
17
CONFIDENTIAL SOURCE CODE,” or “PRIVACY DATA”
18
“Designating Legend”), to each page that contains protected material. If only a
19
portion of the material on a page qualifies for protection, the Producing Party also
20
must clearly identify the protected portion(s) (e.g., by making appropriate markings
21
in the margins).
-
ATTORNEYS’
EYES
ONLY,”
“RESTRICTED
-
(hereinafter
22
A Party or Non-Party that makes original documents available for inspection
23
need not designate them for protection until after the inspecting Party has indicated
24
which documents it would like copied and produced. During the inspection and
25
before the designation, all of the material made available for inspection shall be
26
deemed “RESTRICTED - ATTORNEYS’ EYES ONLY.” After the inspecting
27
Party has identified the documents it wants copied and produced, the Producing
28
9
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 10 of 37 Page ID #:3021
1
Party must determine which documents, or portions thereof, qualify for protection
2
under this Order. Then, before producing the specified documents, the Producing
3
Party must affix Designating Legends to each page that contains Protected Material.
4
If only a portion of the material on a page qualifies for protection, the Producing
5
Party also must clearly identify the protected portion(s) (e.g., by making appropriate
6
markings in the margins).
7
(b)
for testimony given in depositions or hearings, that the
8
Designating Party, at the deposition or hearing or within ten (10) days after receipt
9
of a deposition or hearing transcript, designate the deposition or hearing transcript
10
or any portion thereof as “CONFIDENTIAL,” “RESTRICTED - ATTORNEYS’
11
EYES ONLY,” “RESTRICTED - CONFIDENTIAL SOURCE CODE,” or
12
“PRIVACY DATA” pursuant to this Order, by affixing a Designating Legend to
13
each page that contains Protected Material. If only a portion of the material on a
14
page qualifies for protection, the Producing Party also must clearly identify the
15
protected portion(s) (e.g., by making appropriate markings in the margins). Access
16
to the deposition or hearing transcript so designated shall be limited in accordance
17
with the terms of this Order. Until expiration of the 10-day period, the entire
18
deposition or hearing transcript shall be treated as RESTRICTED - ATTORNEYS’
19
EYES ONLY.
20
(c)
for electronic files and documents produced in native electronic
21
format, that the Producing Party append, at a minimum, the legend
22
“CONFIDENTIAL,”
23
“RESTRICTED - CONFIDENTIAL SOURCE CODE,” or “PRIVACY DATA”
24
(hereinafter “Designating Legend”) to the file names or designators information
25
indicating whether the file contains “CONFIDENTIAL,” “RESTRICTED -
26
ATTORNEYS’ EYES ONLY,” or “RESTRICTED CONFIDENTIAL SOURCE
“RESTRICTED
-
27
28
10
ATTORNEYS’
EYES
ONLY,”
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 11 of 37 Page ID #:3022
1
CODE” material, or shall use any other reasonable method for so designating
2
Protected Materials produced in electronic format.
3
(d)
for information produced in some form other than documentary
4
and for any other tangible items, that the Producing Party affix in a prominent place
5
on the exterior of the container or containers in which the information is stored the
6
legend “CONFIDENTIAL,” “RESTRICTED - ATTORNEYS’ EYES ONLY,”
7
“RESTRICTED CONFIDENTIAL SOURCE CODE,” or “PRIVACY DATA.” If
8
only a portion or portions of the information warrants protection, the Producing
9
Party, to the extent practicable, shall identify the protected portion(s).
10
5.3.
To the extent a producing Party believes in good faith that certain
11
Protected Material qualifying to be designated CONFIDENTIAL is so sensitive that
12
its dissemination deserves even further limitation, the producing Party may
13
designate such Protected Material “RESTRICTED - ATTORNEYS’ EYES ONLY,”
14
or to the extent such Protected Material includes or substantially reveals computer
15
source code1 and/or live data (that is, data as it exists residing in a database or
16
databases), the producing Party may designate such Protected Material as
17
“RESTRICTED CONFIDENTIAL SOURCE CODE” (“Source Code Material”), or
18
to the extent such Protected Material includes any information that a producing Party
19
reasonably believes to be subject to federal, state or foreign Data Protection Laws or
20
21
22
23
24
25
26
27
1
“Source code” means computer code, formulas, engineering specifications, or
schematics that define or otherwise describe in detail the algorithms or structure of
software or hardware designs. Source code includes software, source code,
executable code, object code (i.e., computer instructions and data definitions
expressed in a form suitable for input to an assembler, compiler, or other translator),
microcode, register transfer language (“RTL”), firmware, and hardware description
language (“HDL”), as well as any and all programmer notes, annotations, and other
comments of any type related thereto and accompanying the code. For avoidance of
doubt, this includes source files, make files, intermediate output files, executable
files, header files, resource files, library files, module definition files, map files,
object files, linker files, browse info files, and debug files.
28
11
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 12 of 37 Page ID #:3023
1
other privacy obligations, the producing Party may designate such Protected
2
Material as “PRIVACY DATA”.
3
6.
4
CHALLENGING CONFIDENTIALITY DESIGNATIONS
6.1.
Timing of Challenges. Any Party or Non-Party may challenge a
5
designation of confidentiality at any time that is consistent with the Court’s
6
Scheduling Order.
7
8
6.2.
resolution process under Local Rule 37-1 et seq.
9
10
Meet and Confer. The Challenging Party shall initiate the dispute
6.3.
Joint Stipulation. Any challenge submitted to the Court shall be via a
joint stipulation pursuant to Local Rule 37-2.
11
6.4.
The burden of persuasion in any such challenge proceeding shall be on
12
the Designating Party. Frivolous challenges, and those made for an improper
13
purpose (e.g., to harass or impose unnecessary expenses and burdens on other
14
parties) may expose the Challenging Party to sanctions. Unless the Designating
15
Party has waived or withdrawn the confidentiality designation, all parties shall
16
continue to afford the material in question the level of protection to which it is
17
entitled under the Producing Party’s designation until the Court rules on the
18
challenge.
19
7.
20
ACCESS TO AND USE OF PROTECTED MATERIAL
7.1.
Basic Principles. A Receiving Party may use Protected Material that is
21
disclosed or produced by another Party or by a Non-Party in connection with this
22
Action only for prosecuting, defending, or attempting to settle this Action, and may
23
not use Protected Material for any other purpose whatsoever, including, without
24
limitation, any other litigation, patent prosecution or acquisition, patent
25
reexamination, inter parties review, or reissue proceedings, or any business or
26
competitive purpose or function. Such Protected Material may be disclosed only to
27
the categories of persons and under the conditions described in this Order, and
28
12
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 13 of 37 Page ID #:3024
1
Protected Material shall not be distributed, disclosed, or made available to anyone
2
except as expressly provided in this Order. When the Action has been terminated, a
3
Receiving Party must comply with the provisions of section 14 below (FINAL
4
DISPOSITION).
5
Protected Material must be stored and maintained by a Receiving Party at a
6
location and in a secure manner that ensures that access is limited to the persons
7
authorized under this Order.
8
9
7.2.
Disclosure of “CONFIDENTIAL” Information or Items.
Unless
otherwise ordered by the court or permitted in writing by the Designating Party, a
10
Receiving
11
“CONFIDENTIAL” only to:
12
(a)
Party
may
disclose
any
information
or
item
designated
the Receiving Party’s Outside Counsel of Record in this Action,
13
as well as employees of said Outside Counsel of Record to whom it is reasonably
14
necessary to disclose the information for this Action;
15
16
(b)
the officers, directors, and employees (including House Counsel)
of the Receiving Party to whom disclosure is reasonably necessary for this Action;
17
(c)
Outside Counsel or Experts (as defined in this Order) of the
18
Receiving Party to whom disclosure is reasonably necessary for this Action and who
19
have signed the “Acknowledgment and Agreement to Be Bound” (Exhibit A),
20
provided that (1) before access to an Expert is given, the Expert has completed the
21
Undertaking attached as Exhibit A hereto and the same is served upon the producing
22
Party with a current curriculum vitae2 of the Expert at least seven (7) days before
23
24
25
26
27
For any such person, the curriculum vitae shall identify his/her (i) current
employer(s), (ii) each person or entity from whom s/he has received compensation
or funding for work in his or her areas of expertise or to whom the s/he has provided
professional services, including in connection with a litigation, at any time during
the preceding five years; (iii) (by name and number of the case, filing date, and
2
28
13
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 14 of 37 Page ID #:3025
1
access to the Protected Material is to be given to that Expert. The Designating Party
2
may, within the seven (7) days, notify the receiving Party in writing that it objects
3
to disclosure of Protected Material to the Expert, and state its reasons for objection.
4
The Parties agree to promptly confer and use good faith to resolve any such
5
objection. If the Parties are unable to resolve any objection, the objecting Party may
6
file a motion with the Court within three (3) days of a meet and confer at which the
7
parties agree that they are at an impasse, or within such other time as the Parties may
8
agree, seeking a protective order with respect to the proposed disclosure. The
9
objecting Party shall have the burden of proving the need for a protective order. No
10
disclosure shall occur until all such objections are resolved by agreement or Court
11
order;
12
(d)
the court and its personnel;
13
(e)
court reporters and their staff;
14
(f)
professional jury or trial consultants, mock jurors, and
15
Professional Vendors to whom disclosure is reasonably necessary for this Action
16
and who have signed the “Acknowledgment and Agreement to Be Bound” (Exhibit
17
A);
18
(g)
the author or recipient of a document containing the information
19
or a custodian or other person who otherwise possessed or knew the information;
20
and
21
22
23
24
25
26
27
location of court) any litigation in connection with which the s/he has offered expert
testimony, including through a declaration, report, or testimony at a deposition or
trial, during the preceding five years. If such consultant or expert believes any of this
information is subject to a confidentiality obligation to a third-party, then the s/he
should provide whatever information can be disclosed without violating any
confidentiality agreements, and the Party seeking to disclose Protected Material to
the consultant or expert shall be available to meet and confer with the designating
Party regarding any such engagement.
28
14
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 15 of 37 Page ID #:3026
1
(h)
any mediator or settlement officer, and their supporting
2
personnel, mutually agreed upon by any of the parties engaged in settlement
3
discussions.
4
7.3.
For Protected Material designated RESTRICTED - ATTORNEYS’
5
EYES ONLY, access to, and disclosure of, such Protected Material shall be limited
6
to individuals listed in Sections 7.2(a) and (c-h), above, and up to one House Counsel
7
for the Parties who is a member in good standing of at least one state bar and has
8
responsibility for making decisions dealing directly with the litigation of this Action,
9
but who exercises no competitive decision-making authority on behalf of either
10
11
12
13
Party.
7.4.
For Protected Material designated RESTRICTED CONFIDENTIAL
SOURCE CODE, the following additional restrictions apply:
(a)
Access to a Party’s Source Code Material shall be provided only
14
on “stand-alone” computer(s) (that is, the computer may not be linked to any
15
network, including a local area network (“LAN”), an intranet or the Internet) in a
16
secured locked room. The stand-alone computer(s) may be connected to a printer.
17
The stand-alone computer(s) must be part of a setup including an external monitor,
18
keyboard, mouse, table or desk, and chair. And each stand-alone computer shall
19
have at least the following software or equivalent loaded and available at the time of
20
source code review: (1) Linux/Ubuntu (including functionality for regex, libreoffice,
21
vim, python, a pdf reader, and the ability to print to PDF), (2) Visual Studio Code or
22
Eclipse with C, C++, and Java, and (3) build-essential. The stand-alone computer(s)
23
may only be located within the United States at the offices of the producing Party’s
24
outside counsel. The stand-alone computer(s) shall have disk encryption and be
25
password protected.
26
input/output device (e.g., USB memory stick, mobile phone or tablet, camera or any
27
camera-enabled device, CD, floppy disk, portable hard drive, laptop, or any device
Except as otherwise provided, use or possession of any
28
15
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 16 of 37 Page ID #:3027
1
that can access the Internet or any other network or external system, etc.) is
2
prohibited while accessing the computer containing the source code. All persons
3
entering the locked room containing the stand-alone computer(s) must attest that
4
they are not carrying any prohibited items before they will be given access to the
5
stand-alone computer(s). The producing Party may periodically physically “check
6
in” on the receiving Party’s representatives during any stand-alone computer review
7
and may intermittently (i.e., not continuously) visually monitor the activities of the
8
receiving Party’s representatives by knocking on the door to or from outside the
9
room in which the stand alone computer(s) is located to ensure that no unauthorized
10
copying of the Source Code Material is being made or transmitted. The producing
11
Party may not monitor by way of video or recording devices or record (visually,
12
audibly or by other means) the activities of the receiving Party’s representatives;
13
(b)
The receiving Party shall make reasonable efforts to restrict its
14
requests for such access to the stand-alone computer(s) to normal business hours,
15
which for purposes of this paragraph shall be 9:00 a.m. through 5:00 p.m. However,
16
upon reasonable notice from the receiving party, the producing Party shall make
17
reasonable efforts to accommodate the receiving Party’s request for access to the
18
stand-alone computer(s) outside of normal business hours. The Parties agree to
19
cooperate in good faith such that maintaining the producing Party’s Source Code
20
Material at the offices of its outside counsel shall not unreasonably hinder the
21
receiving Party’s ability to efficiently and effectively conduct the prosecution or
22
defense of this Action;
(c)
23
The producing Party shall provide the receiving Party with
24
information explaining how to start, log on to, and operate the stand-alone
25
computer(s) in order to access the produced Source Code Material on the stand-alone
26
computer(s);
27
28
16
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 17 of 37 Page ID #:3028
1
2
(d)
The producing Party will produce Source Code Material in
computer searchable format on the stand-alone computer(s) as described above;
3
(e)
Access to Source Code Material shall be limited to Outside
4
Counsel of Record and up to three (3) Experts per party 3 (not existing employees or
5
affiliates of a Party or an affiliate of a Party) retained for the purpose of this litigation
6
and approved to access such Protected Materials pursuant to 7.2(c) above.
7
(f)
To the extent portions of Source Code Material are quoted in an
8
electronic document or image of a document which must be filed or served (“Source
9
Code Document”), either (1) the entire Source Code Document will be stamped and
10
treated as RESTRICTED CONFIDENTIAL SOURCE CODE or (2) those pages
11
containing quoted Source Code Material will be separately stamped and treated as
12
RESTRICTED CONFIDENTIAL SOURCE CODE;
13
(g)
Except as set forth in this and the preceding paragraph, no
14
electronic copies of Source Code Material shall be made without prior written
15
consent of the producing Party. The receiving Party may create documents with an
16
electronic copy or image of limited excerpts of Source Code Material (“Source Code
17
Documents”) only to the extent necessary to create Source Code Documents, or any
18
drafts of these documents 4. The receiving Party shall only include such excerpts as
19
are reasonably necessary for the purposes for which such part of the Source Code
20
Material is used. Images or copies of Source Code Material shall not be included in
21
correspondence between the parties (references to production numbers shall be used
22
instead) and shall be omitted from pleadings and other papers except to the extent
23
permitted herein. Any electronic transmission of a file containing a selected portion
24
of the Source Code Material must be encrypted using one of the following software:
25
26
27
Herein, MediaPointe, Inc. and AMHC, Inc. are a single party.
Drafts of a Source Code Document shall only include those excerpts the Receiving
Party believes will be included in the final version of the Source Code Document.
3
4
28
17
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 18 of 37 Page ID #:3029
1
BitLocker, FileVault, LUKS, or VeraCrypt. The communication and/or disclosure
2
of electronic files containing any portion of Source Code Material shall at all times
3
be limited to individuals who are authorized to see Source Code Material under the
4
provisions of this Protective Order. Additionally, all electronic copies of Source
5
Code Documents must be labeled “RESTRICTED CONFIDENTIAL SOURCE
6
CODE.” If Source Code Documents are filed with the Court, they must be filed
7
under seal in accordance with the Court’s rules, procedures and orders;
8
(h)
No person shall copy, e-mail, transmit, upload, download, print,
9
photograph or otherwise duplicate any portion of the designated “RESTRICTED
10
CONFIDENTIAL SOURCE CODE” material, except that the Receiving Party may
11
request paper copies (“Source Code Printouts”) of limited portions of the Source
12
Code Material, but only if and to the extent reasonably necessary for the preparation
13
of court filings, pleadings, expert reports, or other papers, or for deposition or trial.
14
The producing Party shall print for the Receiving Party no more than three (3) sets
15
of Source Code Material and no more than 50 consecutive pages, for an aggregate
16
total of no more than 1000 pages, during the duration of the case. The Receiving
17
Party may file a motion for leave to print a limited number of additional pages above
18
an aggregate total of 1000 pages upon a showing of good cause. The receiving Party
19
shall not request paper copies for the purposes of reviewing the source code other
20
than electronically as set forth in Section 7.4(a) in the first instance. Within three
21
(3) business days or such additional time as reasonably necessary due to the volume
22
of pages requested, the Producing Party will provide the requested material on
23
watermarked or colored paper bearing Bates numbers and the legend
24
“RESTRICTED CONFIDENTIAL SOURCE CODE” unless objected to as
25
discussed below. Even if within the limits described, the producing Party may, upon
26
a showing of good cause, challenge the amount of source code requested in hard
27
copy form or whether the source code requested in hard copy form is reasonably
28
18
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 19 of 37 Page ID #:3030
1
necessary to any case preparation activity pursuant to the dispute resolution
2
procedure and timeframes set forth in Section 6, above, whereby the producing Party
3
is the “Challenging Party” for purposes of dispute resolution. Contested Source
4
Code Printouts do not need to be produced to the receiving Party until the matter is
5
resolved by the Court;
6
(i)
If the receiving Party’s outside counsel, consultants, or experts
7
obtain printouts of Source Code Material, the receiving Party shall ensure that such
8
outside counsel, consultants, or experts keep the printouts in a secured locked area
9
in the offices of such outside counsel, consultants, or expert. The receiving Party
10
may also temporarily keep the printouts or photocopies at: (i) the Court for any
11
proceedings(s) relating to the Source Code Material, for the dates associated with
12
the proceeding(s); (ii) the sites where any deposition(s) relating to the Source Code
13
Material are taken, for the dates associated with the deposition(s); and (iii) any
14
intermediate location reasonably necessary to transport the printouts to a Court
15
proceeding or deposition);
16
(j)
A producing Party’s Source Code Material may only be
17
transported by the receiving Party at the direction of Outside Counsel of Record
18
authorized under Section 7.4(e) above to another person authorized under Section
19
7.4(e) above, on paper or removable electronic media (e.g., a DVD, CD-ROM, or
20
flash memory “stick”) via hand carry, Federal Express or other similarly reliable
21
courier. Any Source Code Material that is stored electronically must be kept in a
22
secured container (e.g., Bitlocker or equivalent) and must be further password
23
protected.
24
electronically over a network of any kind, including a LAN, an intranet, or the
25
Internet.
26
reasonably necessary for filing any Source Code material with the Court.
27
Notwithstanding anything else in this Protective Order, the Parties may make
Source Code Material may not be transported or transmitted
Source Code Material may only be transported electronically as is
28
19
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 20 of 37 Page ID #:3031
1
electronic copies, and send by electronic mail, copies of Source Code Documents,
2
and any notes taken during Source Code review pursuant to Section 7.4(k), below,
3
as part of their preparation of draft pleadings and/or expert reports in this case,
4
provided that any such documents sent by electronic mail are sent in a password-
5
protected file using 256-bit or higher encryption, with the password sent via separate
6
electronic mail;
7
(k)
The Receiving Party shall be entitled to take notes (electronic or
8
non-electronic) relating to the Source Code but may not copy the Source Code into
9
such notes. To the extent the Receiving Party desires to take notes electronically,
10
the Producing Party shall provide a note-taking computer (e.g., a computer, which
11
is distinct from the standalone computer, that is not linked to any network, including
12
a local area network (“LAN”), an intranet or the Internet, and has image making
13
functionality of any type disabled, including but not limited to camera or video
14
functionality) (“note-taking computer”) with a current, widely used word processing
15
program in the Source Code review room for the Receiving Party’s use in taking
16
such notes. The “note-taking computer” shall be used for the sole purpose of note-
17
taking and shall be retained by the Producing Party. Such notes shall be downloaded
18
to a removable disk or drive for the Receiving Party (but not the Producing Party) to
19
retain, and the computer cleared of such notes. The laptop computer shall have no
20
features which would hinder the complete clearing of the Receiving Party’s notes
21
after such notes have been downloaded. Any such notes shall not include copies or
22
reproductions of portions of the source code; however, the notes may contain
23
filenames, directory names, module names, class names, parameter names, variable
24
names, function names, method names, or procedure names. No copies of any
25
portion of the source code may leave the room in which the source code is inspected
26
except as otherwise provided herein. Further, no other written or electronic record
27
of the source code is permitted except as otherwise provided herein. No notes shall
28
20
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 21 of 37 Page ID #:3032
1
be made or stored on the inspection computer or left behind at the site where the
2
inspection computer is made available, and any such notes shall be deleted or
3
destroyed by the producing Party, without reviewing the substance of the notes, upon
4
discovery. Notwithstanding the foregoing, any such notes shall be stamped and
5
treated as “RESTRICTED CONFIDENTIAL SOURCE CODE.” The log of such
6
notes need not be produced to any other party absent Court Order (e.g., potentially
7
in connection with a Protective Order violation motion);
8
(l)
A list of names of persons who will review Source Code Material
9
on the standalone computer(s) will be provided to the producing Party in conjunction
10
with any written (including email) notice requesting inspection. Prior to the first
11
inspection of any Source Code Material on the stand-alone computer(s), the
12
receiving Party shall provide three (3) business days’ notice to schedule the initial
13
inspection with the producing Party. The receiving Party shall provide reasonable
14
advance notice of any additional inspections. Such notice shall include the names
15
for every individual from the receiving Party who will attend the inspection. The
16
producing Party may maintain a daily log of the names of persons who enter the
17
locked room to view the source code and when they enter and depart;
18
(m)
The receiving Party’s outside counsel shall maintain a log of all
19
copies of the Source Code Printouts (received from a producing Party) that are
20
delivered by the receiving Party to any person and a log of any electronic images of
21
Source Code Material. The log shall include the names of the recipients and
22
reviewers of copies and locations where the copies are stored. Upon request by the
23
producing Party, the receiving Party shall provide reasonable assurances and/or
24
descriptions of the security measures employed by the receiving Party and/or person
25
that receives a copy of any portion of the source code; and
26
27
(n)
At the Producing Party’s request, all copies of any portion of the
Source Code Printouts in whatever form shall be securely destroyed if they are no
28
21
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 22 of 37 Page ID #:3033
1
longer in use. Copies of Source Code Printouts that are marked as deposition
2
exhibits shall not be provided to the Court Reporter or attached to deposition
3
transcripts; rather, the deposition record will identify the exhibit by its production
4
number(s).
5
7.5.
For Protected Material designated PRIVACY DATA, the following
6
additional restrictions apply:
7
(a)
“PRIVACY DATA”: refers to any information that a producing
8
Party reasonably believes to be subject to federal, state or foreign Data Protection
9
Laws or other privacy obligations. This provision may not be arbitrarily applied,
10
and is meant as means to designate and secure support data, where available, that is
11
believed to be subject to Data Protection Laws if the receiving party requests to
12
inspect or challenge anonymized summary data. The parties must promptly meet
13
and confer to resolve any disputes regarding a PRIVACY DATA designation.
14
Privacy Data constitutes highly sensitive materials requiring special protection.
15
Examples of such Data Protection Laws include, without limitation, The Gramm-
16
Leach-Bliley Act, 15 U.S.C. § 6801 et seq. (financial information); The Health
17
Insurance Portability and Accountability Act (“HIPAA”) and the regulations
18
thereunder, 45 CFR Part 160 and Subparts A and E of Part 164 (medical
19
information); Regulation (EU) 2016/679 Of the European Parliament and of the
20
Council of 27 April 2016 on the Protection of Natural Persons with Regard to the
21
Processing of Personal Data and on the Free Movement of Such Data, also known
22
as the General Data Protection Regulation (“GDPR”); and the German Federal Data
23
Protection Act (“BDSG”).
24
25
26
27
(b)
PRIVACY DATA must be treated with the same provisions as
Protected Material designated RESTRICTED CONFIDENTIAL SOURCE CODE.
(c)
To the extent practical, PRIVACY DATA included in
documents, information, or material must be redacted so that the documents,
28
22
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 23 of 37 Page ID #:3034
1
information, or material can be produced in the ordinary course. For these redacted
2
documents, information, or materials, the receiving party may request that
3
unredacted versions be produced on the source code computer in accordance with
4
Section 7.4 above.
5
(d)
If such redactions are not practical to make (e.g., the PRIVACY
6
DATA is clustered in log files or batch files), then the documents, information, or
7
material containing the PRIVACY DATA may be produced on the source code
8
computer in accordance with Section 7.4 above.
9
7.6.
Absent written consent from the designating Party, any person
10
associated or affiliated with the Parties and permitted to receive each Party’s
11
Protected Material, who reviews, or otherwise learns, in whole or in part, each
12
Party’s Protected Material marked RESTRICTED - ATTORNEYS’ EYES ONLY
13
or RESTRICTED - CONFIDENTIAL SOURCE CODE under this Order shall not
14
prepare, prosecute, supervise, participate in, or assist in the preparation or
15
prosecution of any U.S., foreign, or international patent application relating to the
16
subject matter of this Action, including without limitation (a) the patents asserted in
17
this action, (b) any patent application related by claim of priority to any of the patents
18
asserted in this Action, (c) any patent application relating to the structures and/or
19
functionality of any products, services, or systems accused by MediaPointe in this
20
Action, or (d) any patent application related to the subject matter of any Protected
21
Material marked RESTRICTED - ATTORNEYS’ EYES ONLY or RESTRICTED
22
- CONFIDENTIAL SOURCE CODE, during the pendency of this Action and for
23
(2) years after its conclusion, including any appeals. For purposes of this paragraph,
24
“prosecution” includes any activity related to the competitive business decisions
25
involving (i) the preparation or prosecution (for any person or entity) of patent
26
applications, including among others reexamination and reissue applications or (ii)
27
directly or indirectly participating, drafting, amending, advising, or otherwise
28
23
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 24 of 37 Page ID #:3035
1
affecting the scope or maintenance of patent claims.5 However, these prohibitions
2
shall not preclude each Party’s outside counsel or Expert from participating in any
3
inter partes review, CBM, or post-grant review proceedings, provided that each
4
Party’s outside counsel or Expert do not participate in any claim drafting or
5
amendment of claims in such proceedings.
6
7
7.7.
Protected Material produced in this litigation may contain Export
Controlled Information.
8
(a)
“Export Controlled Information” refers to any information
9
subject to applicable export control and economic sanctions laws and regulations,
10
including the Export Administration Regulations (“EAR”, 15 CFR 730 et seq.,
11
http://www.bis.doc.gov/) administered by the Department of Commerce, Bureau of
12
Industry and Security, and the Foreign Asset Control Regulations (31 CFR 500 et
13
seq.,
14
Department of Treasury, Office of Foreign Assets Control (“OFAC”), and similar
15
laws and regulations in other jurisdictions (“Export Control Laws”).
16
http://www.treas.gov/offices/enforcement/ofac/)
(b)
administered
by
the
The Producing Party will produce Protected Material to
17
Receiving Parties within the United States, to the extent authorized by Export
18
Control Laws. Receiving Parties may not export, re-export, transfer, disclose, or
19
release (collectively, “Export”) any Export Controlled Information to any
20
destination, person, entity, or end use without first obtaining approval from the U.S.
21
government or as otherwise authorized by Export Control Laws. Outside Counsel,
22
Experts, or other individuals authorized to receive Export Controlled Information
23
will not Export any Export Controlled Information to any foreign person except as
24
permitted by Export Control Laws, and will not transport any Export Controlled
25
Information outside of U.S. territory, without first obtaining approval from the U.S.
26
27
5
Prosecution includes, for example, original prosecution, reissue, and reexamination
proceedings.
28
24
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 25 of 37 Page ID #:3036
1
government or as otherwise authorized by Export Control Laws. Compliance with
2
all Export Control Laws is the sole responsibility of the Receiving Party.
3
7.8.
No material designated RESTRICTED CONFIDENTIAL SOURCE
4
CODE may leave the territorial boundaries of the United States. Protected Material
5
that is not designated RESTRICTED CONFIDENTIAL SOURCE CODE may be
6
taken outside the United States if it is both reasonably necessary for a deposition
7
taken in a foreign country and to the extent authorized by Export Control Laws.
8
Nothing in this provision shall prevent Outside Counsel or Experts from travelling
9
outside the United States with their personal electronic devices, including laptops
10
and/or cellphones, or reviewing their electronic mail while traveling abroad,
11
provided such activities comply with Export Control Laws.
12
contained within this subsection may be amended through the consent of the
13
producing Party to the extent that such agreed to procedures comply with Export
14
Control Laws.
15
7.9.
The restrictions
Nothing contained herein shall be construed to prejudice any Party’s
16
right to use any Protected Material in taking testimony at any deposition or hearing
17
provided that the Protected Material is only disclosed to person(s) who are: (i)
18
eligible to have access to the Protected Material by virtue of his or her employment
19
with the designating party, (ii) identified in the Protected Material as an author,
20
addressee, or copy recipient of such information, (iii) although not identified as an
21
author, addressee, or copy recipient of such Protected Material, has, in the ordinary
22
course of business, seen or could be expected to see or receive such Protected
23
Material, (iv) court reporters and videographers; (v) the Court; or (vi) other persons
24
entitled hereunder to access to Protected Material. Subject to any challenge to a
25
particular designation under Section 6, above, the Parties will not oppose any
26
reasonable request by the designating Party that the courtroom be sealed, if allowed
27
28
25
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 26 of 37 Page ID #:3037
1
by the Court, during the presentation of any testimony, evidence, or argument
2
relating to or involving the use of any Protected Material.
3
8.
PROTECTED MATERIAL SUBPOENAED OR ORDERED PRODUCED
4
IN OTHER LITIGATION
5
If a Party is served with a subpoena or a court order issued in other litigation
6
that compels disclosure of any information or items designated in this Action as
7
“CONFIDENTIAL,” that Party must:
8
9
(a)
promptly notify in writing the Designating Party.
Such
notification shall include a copy of the subpoena or court order;
10
(b)
promptly notify in writing the party who caused the subpoena or
11
order to issue in the other litigation that some or all of the material covered by the
12
subpoena or order is subject to this Protective Order. Such notification shall include
13
a copy of this Stipulated Protective Order; and
14
(c)
cooperate in good faith with respect to all reasonable procedures
15
sought to be pursued by the Designating Party whose Protected Material may be
16
affected.
17
If the Designating Party timely seeks a protective order, the Party served with
18
the subpoena or court order shall not produce any information designated in this
19
action as “CONFIDENTIAL” before a determination by the court from which the
20
subpoena or order issued, unless the Party has obtained the Designating Party’s
21
permission. The Designating Party shall bear the burden and expense of seeking
22
protection in that court of its confidential material and nothing in these provisions
23
should be construed as authorizing or encouraging a Receiving Party in this Action
24
to disobey a lawful directive from another court.
25
26
27
28
26
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 27 of 37 Page ID #:3038
1
2
3
9.
A NON-PARTY’S PROTECTED MATERIAL SOUGHT TO BE
PRODUCED IN THIS LITIGATION
(a)
The terms of this Order are applicable to information produced
4
by a Non-Party in this Action and designated as “CONFIDENTIAL.”
5
information produced by Non-Parties in connection with this litigation is protected
6
by the remedies and relief provided by this Order. Nothing in these provisions
7
should be construed as prohibiting a Non-Party from seeking additional protections.
8
(b)
Such
In the event that a Party is required, by a valid discovery request,
9
to produce a Non-Party’s confidential information in its possession, and the Party is
10
subject to an agreement with the Non-Party not to produce the Non-Party’s
11
confidential information, then the Party shall:
12
(1)
promptly notify in writing the Requesting Party and the
13
Non-Party that some or all of the information requested is subject to a confidentiality
14
agreement with a Non-Party;
15
(2)
promptly provide the Non-Party with a copy of the
16
Stipulated Protective Order in this Action, the relevant discovery request(s), and a
17
reasonably specific description of the information requested; and
18
(3)
make the information requested available for inspection by
19
the Non-Party, if requested.
20
(c)
If the Non-Party fails to seek a protective order from this court
21
within 14 days of receiving the notice and accompanying information, the Receiving
22
Party may produce the Non-Party’s confidential information responsive to the
23
discovery request. If the Non-Party timely seeks a protective order, the Receiving
24
Party shall not produce any information in its possession or control that is subject to
25
the confidentiality agreement with the Non-Party before a determination by the
26
court. Absent a court order to the contrary, the Non-Party shall bear the burden and
27
expense of seeking protection in this court of its Protected Material.
28
27
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 28 of 37 Page ID #:3039
1
10.
UNAUTHORIZED DISCLOSURE OF PROTECTED MATERIAL
2
If a Receiving Party learns that, by inadvertence or otherwise, it has disclosed
3
Protected Material to any person or in any circumstance not authorized under this
4
Stipulated Protective Order, the Receiving Party must immediately (a) notify in
5
writing the Designating Party of the unauthorized disclosures, (b) use its best efforts
6
to retrieve all unauthorized copies of the Protected Material, (c) inform the person
7
or persons to whom unauthorized disclosures were made of all the terms of this
8
Order, and (d) request such person or persons to execute the “Acknowledgment and
9
Agreement to Be Bound” that is attached hereto as Exhibit A.
10
11.
INADVERTENT PRODUCTION OF PRIVILEGED OR OTHERWISE
11
PROTECTED MATERIAL
12
When a Producing Party gives notice to Receiving Parties that certain
13
inadvertently produced material is subject to a claim of privilege or other protection,
14
the obligations of the Receiving Parties are those set forth in Federal Rule of Civil
15
Procedure 26(b)(5)(B). This provision is not intended to modify whatever procedure
16
may be established in an e-discovery order that provides for production without prior
17
privilege review. Pursuant to Federal Rule of Evidence 502(d) and (e), insofar as
18
the parties reach an agreement on the effect of disclosure of a communication or
19
information covered by the attorney-client privilege or work product protection, the
20
parties may incorporate their agreement in the stipulated protective order submitted
21
to the court. The parties hereby incorporate their agreements provided in their Joint
22
Report pursuant to Federal Rule of Civil Procedure 26. See Dkt. 48.
23
The failure to designate documents, information or material in accordance
24
with this Order and the failure to object to a designation at a given time shall not
25
preclude the filing of a motion at a later date seeking to impose such designation or
26
challenging the propriety thereof. The entry of this Order and/or the production of
27
documents, information and material hereunder shall in no way constitute a waiver
28
28
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 29 of 37 Page ID #:3040
1
of any objection to the furnishing thereof, all such objections being hereby
2
preserved.
3
A designation of Protected Material (i.e., as “CONFIDENTIAL,”
4
“RESTRICTED
5
CONFIDENTIAL SOURCE CODE,” or “PRIVACY DATA”) may be made at any
6
time. Inadvertent or unintentional production of documents, information or material
7
that has not been designated as Protected Material shall not be deemed a waiver in
8
whole or in part of a claim for confidential treatment. Any party that inadvertently
9
or unintentionally produces Confidential Information without designating it as
10
Protected Material may request destruction of that Protected Material by notifying
11
the recipient(s), as soon as reasonably practicable after the producing Party becomes
12
aware of the inadvertent or unintentional disclosure and providing replacement
13
Protected Material that is properly designated. The recipient(s) shall then destroy
14
all copies of the inadvertently or unintentionally produced Protected Materials and
15
any documents, information or material derived from or based thereon.
16
12.
17
18
-
ATTORNEYS’
EYES
ONLY,”
“RESTRICTED
MISCELLANEOUS
12.1. Right to Further Relief. Nothing in this Order abridges the right of any
person to seek its modification by the Court in the future.
19
12.2. Right to Assert Other Objections. By stipulating to the entry of this
20
Protective Order, no Party waives any right it otherwise would have to object to
21
disclosing or producing any information or item on any ground not addressed in this
22
Stipulated Protective Order. Similarly, no Party waives any right to object on any
23
ground to use in evidence of any of the material covered by this Protective Order.
24
12.3. Filing Protected Material. A Party that seeks to file under seal any
25
Protected Material must comply with Local Civil Rule 79-5. Protected Material may
26
only be filed under seal pursuant to a court order authorizing the sealing of the
27
specific Protected Material at issue. If a Party’s request to file Protected Material
28
29
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 30 of 37 Page ID #:3041
1
under seal is denied by the court, then the Receiving Party may file the information
2
in the public record unless otherwise instructed by the court.
3
12.4. Any Party knowing or believing that any other Party is in violation of
4
or intends to violate this Order and has raised the question of violation or potential
5
violation with the opposing Party and has been unable to resolve the matter by
6
agreement may move the Court for such relief as may be appropriate in the
7
circumstances. Pending disposition of the motion by the Court, the Party alleged to
8
be in violation of or intending to violate this Order shall discontinue the performance
9
of and/or shall not undertake the further performance of any action alleged to
10
constitute a violation of this Order.
11
12.5. The inadvertent production of Protected Material by any Party shall not
12
be deemed a publication of the documents, information, or material (or the contents
13
thereof) produced so as to void or make voidable whatever claim the Parties may
14
have as to the proprietary and confidential nature of the documents, information, or
15
other material or its contents.
16
12.6. Pursuant to Federal Rule of Evidence 502(d) and (e), the production of
17
a privileged or work product protected document is not a waiver of privilege or
18
protection from discovery in this case or in any other federal or state proceeding.
19
For example, the mere inadvertent production of a privileged or work product
20
protected document in this case as part of a production is not itself a waiver. The
21
inadvertent production by a Party of Discovery Material subject to the attorney-
22
client privilege, work-product protection, or any other applicable privilege or
23
protection will not waive the applicable privilege and/or protection if a request for
24
return of such inadvertently produced Discovery Material is made promptly after the
25
Producing Party learns of its inadvertent production. Upon a request from any
26
Producing Party who has inadvertently produced Discovery Material that it believes
27
is privileged and/or protected, each Receiving Party shall immediately destroy or
28
30
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 31 of 37 Page ID #:3042
1
return such Protected Material or Discovery Material and all copies to the Producing
2
Party. The parties do not waive any objections as to the production, discoverability,
3
admissibility, or confidentiality of documents.
4
12.7. Each of the Parties shall also retain the right to file a motion with the
5
Court (a) to modify this Order to allow disclosure of Protected Material to additional
6
persons or entities if reasonably necessary to prepare and present this Action; and
7
(b) to apply for additional protection of Protected Material.
8
12.8. This Order shall be binding upon the Parties hereto, their attorneys, and
9
their successors, executors, personal representatives, administrators, heirs, legal
10
representatives, assigns, subsidiaries, divisions, employees, agents, retained
11
consultants and experts, and any persons or organizations over which they have
12
direct control.
13
13.
14
responsible for the interpretation and enforcement of this Agreed Protective Order.
15
After termination of this litigation, the provisions of this Agreed Protective Order
16
shall continue to be binding except with respect to those documents and information
17
that become a matter of public record. This Court retains and shall have continuing
18
jurisdiction over the Parties and recipients of the Protected Material for enforcement
19
of the provisions of this Agreed Protective Order following termination of this
20
litigation. All disputes concerning Protected Material produced under the protection
21
of this Agreed Protective Order shall be resolved by the United States District Court
22
for the Central District of California. In the event anyone shall violate or threaten to
23
violate the terms of this Protective Order, the aggrieved designating Party may
The United States District Court for the Central District of California is
24
25
26
27
28
31
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 32 of 37 Page ID #:3043
1
immediately apply to obtain injunctive relief against any such person violating or
2
threatening to violate any of the terms of this Protective Order.
3
14.
FINAL DISPOSITION
4
After the final disposition of this Action, as defined in Section 4, within 60
5
days of a written request by the Designating Party, each Receiving Party must return
6
all Protected Material to the Producing Party or destroy such material. As used in
7
this subdivision, “all Protected Material” includes all copies, abstracts, compilations,
8
summaries, and any other format reproducing or capturing the Protected Material.
9
Whether the Protected Material is returned or destroyed, the Receiving Party must
10
submit a written certification to the Producing Party (and, if not the same person or
11
entity, to the Designating Party) by the 60 day deadline that (1) identifies (by
12
category, where appropriate) all the Protected Material that was returned or
13
destroyed and (2) affirms that the Receiving Party has not retained any copies,
14
abstracts, compilations, summaries or any other format reproducing or capturing any
15
of the Protected Material. Notwithstanding this provision, Outside Counsel of
16
Record are entitled to retain an archival copy of all pleadings, motion papers, trial,
17
deposition, and hearing transcripts, legal memoranda, correspondence, deposition
18
and trial exhibits, expert reports, attorney work product, and consultant and expert
19
work product, even if such materials contain Protected Material. Any such archival
20
copies that contain or constitute Protected Material remain subject to this Protective
21
Order as set forth in Section 4 (DURATION).
22
15.
23
24
VIOLATION
Any violation of this Order may be punished by appropriate measures
including, without limitation, contempt proceedings and/or monetary sanctions.
25
26
IT IS SO STIPULATED, THROUGH COUNSEL OF RECORD.
27
28
32
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 33 of 37 Page ID #:3044
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Dated: January 13, 2023
/s/ Michael J. Summersgill
Michael J. Summersgill (pro hac vice)
michael.summersgill@wilmerhale.com
Jordan L. Hirsch (pro hac vice)
jordan.hirsch@wilmerhale.com
Benjamin N. Ernst (pro hac vice)
ben.ernst@wilmerhale.com
Asher S. McGuffin (pro hac vice)
asher.mcguffin@wilmerhale.com
WILMER CUTLER PICKERING
HALE AND DORR LLP
60 State Street
Boston, Massachusetts 02109
T: (617) 526-6000 / F: (617) 526-5000
Arthur W. Coviello (SBN 291226)
arthur.coviello@wilmerhale.com
WILMER CUTLER PICKERING
HALE AND DORR LLP
2600 El Camino Real, Suite 400
Palo Alto, California 94306
T: (650) 858-6069 / F: (650) 858-6100
Jason F. Choy (SBN 277583)
jason.choy@wilmerhale.com
WILMER CUTLER PICKERING
HALE AND DORR LLP
350 South Grand Avenue, Suite 2400
Los Angeles, California 90071
T: (213) 443-5300 / F: (213) 443-5400
Counsel for Plaintiff and Counterclaim
Defendant Akamai Technologies, Inc.
24
25
26
27
28
33
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 34 of 37 Page ID #:3045
1
Dated: January 13, 2023
2
/s/ Justin Kenney
Kalpana Srinivasan
ksrinivasan@susmangodfrey.com
SUSMAN GODFREY L.L.P.
1900 Avenue of the Stars, Suite 1400
Los Angeles, California 90067-6029
Telephone: (310) 789-3100
Facsimile: (310) 789-3150
3
4
5
6
7
Meng Xi
mxi@susmangodfrey.com
Thomas V. DelRosario
tdelrosario@susmangodfrey.com
Justin Kenney (pro hac vice)
jkenney@susmangodfrey.com
SUSMAN GODFREY L.L.P.
1000 Louisiana, Suite 5100
Houston, Texas 77002-5096
Telephone: (713) 651-9366
Facsimile: (713) 654-6666
8
9
10
11
12
13
14
15
Counsel for Defendant and Counterclaimant
MediaPointe, Inc., and for Defendant
AMHC, Inc.
16
17
18
19
FOR GOOD CAUSE SHOWN, IT IS SO ORDERED.
20
21
DATED: 1/17/2023\
22
23
24
25
26
________________________________
HON. ALEXANDER F. MacKINNON
United States Magistrate Judge
27
28
34
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 35 of 37 Page ID #:3046
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
35
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 36 of 37 Page ID #:3047
1
2
3
4
5
6
7
8
9
10
11
12
FILER’S ATTESTATION
Pursuant to Local Rule 5-4.3.4(a)(2), the filer hereby attests that all other
signatories to this document concur in the content of, and have authorized, this
filing.
Dated: January 13, 2023
/s/ Michael J. Summersgill
Michael J. Summersgill (pro hac vice)
michael.summersgill@wilmerhale.com
WILMER CUTLER PICKERING
HALE AND DORR LLP
60 State Street
Boston, Massachusetts 02109
T: (617) 526-6000 / F: (617) 526-5000
Counsel for Plaintiff and Counterclaim
Defendant Akamai Technologies, Inc.
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
36
Case 2:22-cv-06233-MCS-AFM Document 62 Filed 01/17/23 Page 37 of 37 Page ID #:3048
1
EXHIBIT A
2
ACKNOWLEDGMENT AND AGREEMENT TO BE BOUND
3
4
I, ______________________________________________ [print or type full name], of
5
_______________________________________________________ [print or type full address],
6
declare under penalty of perjury that I have read in its entirety and understand the Stipulated
7
Protective Order that was issued by the United States District Court for the Central District of
8
California on ______________ in the case of Akamai Technologies, Inc. v. MediaPointe, Inc. et
9
al., No. 2:22-cv-06233-MCS-AFM (C.D. Cal.). I agree to comply with and to be bound by all the
10
terms of this Stipulated Protective Order and I understand and acknowledge that failure to so
11
comply could expose me to sanctions and punishment in the nature of contempt. I solemnly
12
promise that I will not disclose in any manner any information or item that is subject to this
13
Stipulated Protective Order to any person or entity except in strict compliance with the provisions
14
of this Order.
15
I further agree to submit to the jurisdiction of the United States District Court for the Central
16
District of California for enforcing the terms of this Stipulated Protective Order, even if such
17
enforcement proceedings occur after termination of this action.
18
I hereby appoint _____________________________ [print or type full name] of
19
__________________________________________________________________________
20
[print or type full address and telephone number] as my California agent for service of process in
21
connection with this action or any proceedings related to enforcement of this Stipulated Protective
22
Order.
23
Date: _________________________
24
City and State where sworn and signed: ________________________________
25
Printed name:______________________________________
26
27
Signature:_________________________________________
28
37
Disclaimer: Justia Dockets & Filings provides public litigation records from the federal appellate and district courts. These filings and docket sheets should not be considered findings of fact or liability, nor do they necessarily reflect the view of Justia.
Why Is My Information Online?