Bull Bag, LLC v. Remorques Savage, Inc.
Filing
28
ORDER granting in part and denying in part 16 Motion to Dismiss. See attached memorandum of decision. If the parties would like an extension of the Scheduling Order, they must jointly file a motion for extension that makes a particularized showing of good cause for why the extension should be granted, pursuant to Local Rule 7(b), and must jointly propose an amended case schedule. The motion for an extension must be filed on or before 9/6/2017. Signed by Judge Vanessa L. Bryant on 8/30/2017. (Hoffman, S)
UNITED STATES DISTRICT COURT
DISTRICT OF CONNECTICUT
THE BULL BAG, LLC,
Plaintiff,
v.
REMORQUES SAVAGE, INC.,
Defendant.
:
:
:
:
:
:
:
:
:
CIVIL ACTION NO.
3:16-CV-1735 (VLB)
August 30, 2017
MEMORANDUM OF DECISION GRANTING IN PART AND DENYING IN PART
DEFENDANT’S MOTION TO DISMISS [DKT. NO. 16]
I.
Introduction
Plaintiff The Bull Bag, LLC brings this action for breach of contract,
violations of the Connecticut Uniform Trade Secrets Act (“CUTSA”), Conn. Gen.
Stat. § 35-50, violations of the Connecticut Unfair Trade Practices Act (“CUTPA”),
Conn. Gen. Stat. § 42-110a et seq., and for negligent misrepresentation. For the
reasons that follow, the Defendant’s Motion to Dismiss [Dkt. No. 16] is GRANTED
IN PART and DENIED IN PART.
II.
Background
Unless otherwise noted, the facts in this section are taken from the
Plaintiff’s complaint. The Plaintiff is a limited liability company, doing business in
Killingsworth, Connecticut and authorized to do business in Connecticut.
[Compl. ¶ 1]. The Defendant is a Canadian corporation doing business in
Sherbrooke, Quebec, Canada. [Compl. ¶ 2].
In May 2015, the parties began exchanging emails about Defendant’s
potential construction of a trailer custom-built to Plaintiff’s design specifications.
1
[Compl. ¶ 5]. In August 2015, the parties reached an agreement via email, in
which the Defendant agreed to construct this trailer and deliver that trailer to
Connecticut for use in Connecticut. [Compl. ¶¶ 3-4]. This agreement took the
form of a purchase order dated August 17, 2015 for production of a prototype.
[Compl. ¶ 7]. The purchase order does not specify who would design the trailers
or who would own any intellectual property rights to the trailer’s design. [Dkt. No.
16-4]. The Plaintiff began feeling dissatisfied with production delays in November
2015. [Compl. ¶ 9].
The parties had a breakdown in their working relationship, which led to the
termination of this relationship on or about December 2, 2015. [Compl. ¶ 10].
This breakdown was precipitated not only by delays, but by Plaintiff’s belief that
the Defendant misrepresented that it would keep the Plaintiff’s design
specifications confidential and would use the design solely to build products for
the Plaintiff. [Compl. ¶ 26]. The Defendant submitted copies of December 1, 2015
emails memorializing the breakdown.
The first communication in the email chain filed with the Court, from
Plaintiff’s Chief Executive Officer Paul G. DiSpazio, states, “Please
inform me if you [would] like to move forward with the agreement,
without the requested requirement[]s we cannot continue our
relationship.” [Dkt. No. 16-7 at 2]. (The referenced agreement and
requested requirements were not submitted with the Defendant’s
exhibits.)
An unnamed representative of the Defendant replied, “My plans are
not to be used by [an]other manufacturer. Confirm [to] me that and
[sign an] NDA agreement [and] you’ll get [the] plans.” [Dkt. No. 16-7
at 3].
DiSpazio replied, “The engineering cost was part of your quote for
the trailer, we have the prototype specifications we sent to your
many months back. If you cannot supply us with trailers based on
2
our schedule we have the right to go elsewhere. I will not budge or
negotiate on this [any] longer, I need to move forward today with our
crane supplier.” [Dkt. No. 16-7 at 3].
Defendant’s Sales Director Martin Bouchard replied that the
Defendant had consulted an attorney who advised it that the
Defendant held the intellectual property rights to the trailer’s design,
and that they could grant the Plaintiff these rights “but not for free
and not because you told[] us the measurements of the trailers.”
[Dkt. No. 16-7 at 4]. The email further stated that “you signed an
order and you committed yourself by email and over the phone. So I
will deliver the trailer to you next week.” [Dkt. No. 16-7 at 4].
DiSpazio replied, “I’m sorry this is not what was discussed, we will
not be accepting the trailer and ceasing our relationship with you.”
[Dkt. No. 16-7 at 5].
Defendant produced the prototype in late November 2015, but did not deliver it to
the Plaintiff. [Compl. ¶ 8].
Plaintiff claims that the Defendant threatened to sell the prototype to a third
party if the Plaintiff did not pay for the prototype. [Compl. ¶ 13]. Plaintiff also
alleges upon information and belief that the Defendant is improperly using
elements of the prototype’s design for other customers’ products. [Compl. ¶ 15].
On November 25, 2016, Plaintiff served a summons with a copy of the civil
cover sheet and complaint on the Defendant, but did not include with these
documents copies of the Court’s Order re: Chambers Practices [Dkt. No. 5], the
Electronic Filing Order [Dkt. No. 3], the Order on Pretrial Deadlines [Dkt. No. 2], or
the Protective Order [Dkt. No. 4], as required by the Court’s October 19, 2017
Notice to Counsel/Pro Se Parties [Dkt. No. 6].
The Defendant has moved to dismiss this case for lack of personal
jurisdiction, insufficient process, and for failure to state a claim for which relief
may be granted.
3
III.
Lack of Personal Jurisdiction
A. Standard of Review
A civil action should be dismissed if the Court lacks personal jurisdiction
over a party. See Fed. R. Civ. P. 12(b)(2). “When responding to a Rule 12(b)(2)
motion to dismiss for lack of personal jurisdiction, the plaintiff bears the burden
of establishing that the court has jurisdiction over the defendant.” Am.
Wholesalers Underwriting, Ltd. v. Am. Wholesale Ins. Grp., Inc., 312 F. Supp. 2d
247, 251 (D. Conn. 2004) (citing Robinson v. Overseas Military Sales Corp., 21
F.3d 502, 507 (2d Cir. 1994)). Prior to discovery, a plaintiff may defeat a motion to
dismiss based on legally sufficient allegations of jurisdiction and by making
a prima facie case of jurisdiction. Id. (citing Ball v. Metallurgie Hoboken–
Overpelt, S.A., 902 F.2d 194, 197 (2d Cir. 1990)). “When considering a
Rule 12(b)(2) motion, the court construes any factual averments and resolves all
doubts in the plaintiff’s favor.” Am. Wholesalers Underwriting, 312 F. Supp. 2d at
251 (citing CutCo Indus., Inc. v. Naughton, 806 F.2d 361, 365 (2d Cir. 1986)).
B. Analysis
“In diversity cases, federal courts must look to the forum state’s long-arm
statute to determine if personal jurisdiction may be obtained over a nonresident
defendant.” Savin v. Ranier, 898 F.2d 304, 306 (2d Cir. 1990). To establish a
prima facie case of personal jurisdiction, a plaintiff must (1) allege facts sufficient
to show that the forum state’s long-arm statute reaches a defendant; and (2)
establish that the court’s exercise of jurisdiction will not violate due process.
4
Chirag v. MT Marida Marguerite Schiffarhrts, 933 F. Supp. 2d 349, 352 (D. Conn.
2013), aff’d, 604 F. App’x 16 (2d Cir. 2015).
1. Connecticut Long-Arm Jurisdiction
Connecticut’s long-arm statute provides:
Every foreign corporation shall be subject to suit in this state, by a resident
of this state or by a person having a usual place of business in this state,
whether or not such foreign corporation is transacting or has transacted
business in this state and whether or not it is engaged exclusively in
interstate or foreign commerce, on any cause of action arising as follows:
(1) Out of any contract made in this state or to be performed in this state;
(2) out of any business solicited in this state by mail or otherwise if the
corporation has repeatedly so solicited business, whether the orders or
offers relating thereto were accepted within or without the state;
(3) out of the production, manufacture or distribution of goods by such
corporation with the reasonable expectation that such goods are to be
used or consumed in this state and are so used or consumed, regardless
of how or where the goods were produced, manufactured, marketed or sold
or whether or not through the medium of independent contractors or
dealers; or
(4) out of tortious conduct in this state, whether arising out of repeated
activity or single acts, and whether arising out of misfeasance or
nonfeasance.
Conn. Gen. Stat. § 33-929(f). Plaintiff asserts that the Court may exercise
jurisdiction pursuant to the first and fourth factors, asserting that the contract to
build the prototype was made in Connecticut and that Defendant committed
tortious conduct in Connecticut.
Under section 33-929(f)(1), a contract is made “‘when and where the last
thing is done which is necessary to create an effective agreement.’” H. Lewis
Packaging, LLC v. Spectrum Plastics, Inc., 296 F. Supp. 2d 234, 239 (D. Conn.
2003) (quoting Chemical Trading, Inc. v. Manufacture de Produits Chimiques de
5
Tournan, 870 F. Supp. 21, 24 (D. Conn. 1994)). Plaintiff argues that because Paul
DiSpazio was located in Connecticut when he electronically signed the purchase
order, the contract was made in Connecticut. [Pl. Opp. at 3]. Defendant does not
contest that the Plaintiff’s electronic signature was the last action necessary to
finalize their agreement, but counters that section 33-929(f)(1) was intended to
apply only to contracts signed in person, rather than virtually, noting that the
Plaintiff cited cases involving contracts “physically” signed in Connecticut. [Def.
Reply at 2].
The Defendant has not offered any precedent which suggests that the
acceptance of a contract in Connecticut does not give rise to long-arm
jurisdiction where the contract is negotiated and signed electronically or
transmitted via email. In fact, the District of Connecticut has held that section 33929(f)(1) is satisfied where negotiations between parties in different states are
conducted over the telephone or via email, and acceptance is accomplished
electronically by telephone or fax. See, e.g., Vanco Trading, Inc. v. Odfjell
Terminals (Houston) LP, No. 3:09CV219 AWT, 2010 WL 965789, at *1, *3 (D. Conn.
Mar. 15, 2010); H. Lewis Packaging, 296 F. Supp. 2d at 238-39. By attempting to
contrast an electronic signature and emails with telephone calls and faxes, the
Defendant at best identifies a distinction without a difference. The Court
therefore finds that the Plaintiff has shown that the Defendant is subject to longarm jurisdiction in Connecticut, and must consider whether the Court’s exercise
of personal jurisdiction is consistent with due process.
6
2. Due Process
“The constitutional analysis under the Due Process Clause consists of two
separate components: the ‘minimum contacts’ inquiry and the ‘reasonableness’
inquiry.” Licci ex rel. Licci v. Lebanese Canadian Bank, SAL, 673 F.3d 50, 60 (2d
Cir. 2012).
a. Minimum Contacts
The “minimum contacts” inquiry requires the Court to consider whether
the Defendant has “purposefully avail[ed] itself of the privilege of conducting
activities within the forum state, thus invoking the benefits and protections of its
laws.” See Vertrue v. Meshkin, 429 F. Supp. 2d 479, 495 (D. Conn. 2006) (quoting
Hanson v. Denckla, 357 U.S. 235, 253 (1958)). “A commercial actor need not have
a physical presence in a state to establish the necessary minimum contacts, so
long as the actor’s efforts are directed at the forum state.” Chirag, 933 F. Supp.
2d at 354. However, a defendant’s conduct and contacts with the forum state
must be such that the defendant “should reasonably anticipate being haled into
court there.” Burger King Corp. v. Rudzewicz, 471 U.S. 462, 474 (1985) (quoting
World-Wide Volkswagen Corp. v. Woodson, 444 U.S. 286, 297 (1980)). Courts
must consider a totality of the circumstances to determine whether a defendant’s
contacts with the forum state justify the exercise of personal jurisdiction. Grand
River Enters. Six Nations, Ltd. v. Pryor, 425 F.3d 158, 166 (2d Cir. 2005).
While the Defendant correctly states that a single sale of a product in a
state is often insufficient to establish minimum contacts, the single sale at issue
in this case is distinguishable from those at issue in the cases the Defendant
7
cites. For example, J. McIntyre Machinery, Ltd. v. Nicastro, 564 U.S. 873, 882-83,
886 (2011), discusses the placement of a single product into a “stream of
commerce,” wherein a manufacturer is sued in a state because a third-party
distributor sold a product in that state. This is not the situation now confronting
the Court. Here, the Defendant negotiated a contract with a Connecticut company
through a series of telephone calls and emails with company representatives
located in Connecticut, and custom-built a prototype that took several months to
complete, was worth over $18,000, and was to be delivered to Connecticut. These
contacts cannot be considered so “random, fortuitous, or attenuated” that the
exercise of jurisdiction would be improper. Rudzewicz, 471 U.S. at 475. Rather,
by engaging in the business transaction at issue here, the Defendant reached out
beyond Canada to create a continuing relationship with and obligations to a
Connecticut company. The Defendant must therefore be “subject to regulation
and sanctions in [Connecticut] for the consequences of [its] activities,” id. at 473.
b. Reasonableness
The “reasonableness” inquiry requires the Court to decide “whether the
assertion of personal jurisdiction comports with traditional notions of fair play
and substantial justice—that is, whether it is reasonable to exercise personal
jurisdiction under the circumstances of the particular case.” Licci, 673 F.3d at 60
(quotations omitted). The Supreme Court has held that courts must evaluate the
following factors as part of this analysis: “(1) the burden that the exercise of
jurisdiction will impose on the defendant[s]; (2) the interests of the forum state in
adjudicating the case; (3) the plaintiff[s’] interest in obtaining convenient and
8
effective relief; (4) the interstate judicial system’s interest in obtaining the most
efficient resolution of the controversy; and (5) the shared interest of the states in
furthering substantive social policies.” Metro. Life Ins. Co. v. Robertson-Ceco
Corp., 84 F.3d 560, 568 (2d Cir. 1996) (citing Asahi Metal Indus. Co., Ltd. v.
Superior Court, 480 U.S. 102, 113-14 (1987)).
The Court considers each of these factors in turn. First, the burden for the
Defendant of litigating in Connecticut is high, because Defendant is a resident of
and operates solely in the Canadian province of Quebec. Second, Connecticut
courts have a strong interest in adjudicating cases which concern Connecticut
companies, and which implicate Connecticut statutory and common law causes
of action. Connecticut has a substantial interest in the viability of business
entities resident in the state and in the preservation of their exclusive proprietary
rights. Third, the Plaintiff’s home state of Connecticut is the most convenient
forum for it to seek relief, as evidenced by its decision to file suit in Connecticut
and its choice of Connecticut counsel. Fourth, the judicial system’s interest in
obtaining the most efficient resolution of the controversy also favors Connecticut
because the case is here, this Court is familiar with the case, both parties have
counsel of their choice here, many of the events at issue occurred here, and
critical witnesses are here, in particular Bull Bag employees who allegedly
developed design specifications for the trailer, and who will likely be called to
testify. The last factor favors neither Connecticut nor Quebec. Both share an
interest in affording their residents a neutral forum in which to resolve contract
disputes, and in both locations have the parties suffered as a result of the
9
breakdown of their deal. As only one of the five factors favors Quebec, three
favor Connecticut, and one factor is neutral, the exercise of personal jurisdiction
in Connecticut is reasonable.
Because Plaintiffs have established that the requirements of Connecticut’s
long-arm statute have been met, and because the exercise of jurisdiction is
consistent with due process, Defendant’s motion to dismiss pursuant to Rule
12(b)(1) is DENIED.
IV.
Insufficient Process
Rule 4 of the Federal Rules of Civil Procedure states that “[a] summons
must be served with a copy of the complaint,” Fed. R. Civ. P. 4(c)(1), and the
summons must “(A) name the court and the parties; (B) be directed to the
defendant; (C) state the name and address of the plaintiff’s attorney . . . (D) state
the time within which the defendant must appear and defend; (E) notify the
defendant that a failure to appear and defend will result in a default judgment
against the defendant for the relief demanded in the complaint; (F) be signed by
the clerk; and (G) bear the Court’s seal.” Fed. R. Civ. P. 4(a)(1). If the summons
lacks any of these requirements or is not served with a copy of the complaint, a
defendant may move to dismiss the case pursuant to Rule 12(b)(4) of the Federal
Rules of Civil Procedure.
The Defendant claims that process was insufficient because the Plaintiff
failed to comply with the Court’s October 19, 2016 Notice to Counsel/Pro Se
Parties [Dkt. No 6], by neglecting to serve documents relating to the case
schedule and Chambers practices. While the Plaintiff’s failure to serve these
10
documents is serious because it represents a failure to comply with an order of
this Court, it is not grounds for dismissal pursuant to Rule 12(b)(4), because the
Federal Rules of Civil Procedure do not require that these documents be served.
Further, the documents Plaintiff failed to serve were filed on the case
docket by the Clerk of the Court on the date the complaint was filed and two
months prior to the Defendant’s appearance. Therefore the failure to serve these
documents was a technical deviation which did not prejudice the Plaintiff. A
benign defect of this nature is insufficient to deprive a litigant of access to the
court. See, Salahuddin v. Cuomo, 861 F.2d 40, 42 (2d Cir. 1988); Enron Oil Corp.
v. Diakuhara, 10 F.3d 90, 95 (2d Cir. 1993) (noting the Second Circuit's “oft-stated
preference for resolving disputes on the merits”).
Because the Plaintiff served on the Defendant a summons that complies
with Rule 4(a)(1) along with a copy of the complaint and the procedural defect did
not prejudice the Defendant, the Defendant’s motion to dismiss for insufficient
process is DENIED.
V.
Failure to State a Claim
A. Standard of Review
Rule 12(b)(6) permits a defendant to move to dismiss a complaint that “fails
to state a claim upon which relief may be granted.” Fed. R. Civ. P. 12(b)(6). “‘To
survive a motion to dismiss, a complaint must contain sufficient factual matter,
accepted as true, to state a claim to relief that is plausible on its face.’”
Sarmiento v. United States, 678 F.3d 147, 152 (2d Cir. 2012) (quoting Ashcroft v.
Iqbal, 556 U.S. 662, 678 (2009)). While Rule 8 does not require detailed factual
11
allegations, “[a] pleading that offers labels and conclusions or formulaic
recitation of the elements of a cause of action will not do. Nor does a complaint
suffice if it tenders naked assertion[s] devoid of further factual enhancement.”
Iqbal, 556 U.S. at 678 (quotations and citations omitted). “Where a complaint
pleads facts that are ‘merely consistent with’ a defendant’s liability, it ‘stops short
of the line between possibility and plausibility of ‘entitlement to relief.’” Id.
(quoting Bell Atl. Corp. v. Twombly, 550 U.S. 544, 557 (2007)). “A claim has facial
plausibility when the plaintiff pleads factual content that allows the court to draw
the reasonable inference that the defendant is liable for the misconduct alleged.”
Id. (citations omitted).
In considering a motion to dismiss for failure to state a claim, the Court
should follow a “two-pronged approach” to evaluate the sufficiency of the
complaint. Hayden v. Paterson, 594 F.3d 150, 161 (2d Cir. 2010). “A court ‘can
choose to begin by identifying pleadings that, because they are no more than
conclusions, are not entitled to the assumption of truth.’” Id. (quoting Iqbal, 556
U.S. at 679). “At the second step, a court should determine whether the ‘wellpleaded factual allegations,’ assumed to be true, ‘plausibly give rise to an
entitlement to relief.’” Id. “The plausibility standard is not akin to a probability
requirement, but it asks for more than a sheer possibility that a defendant has
acted unlawfully.” Iqbal, 556 U.S. at 678 (quotations omitted).
In general, the Court’s review on a motion to dismiss pursuant to Rule
12(b)(6) “is limited to the facts as asserted within the four corners of the
complaint, the documents attached to the complaint as exhibits, and any
12
documents incorporated in the complaint by reference.” McCarthy v. Dun &
Bradstreet Corp., 482 F.3d 184, 191 (2d Cir. 2007). The Court may also consider
“matters of which judicial notice may be taken” and “documents either in
plaintiffs’ possession or of which plaintiffs had knowledge and relied on in
bringing suit.” Brass v. Am. Film Techs., Inc., 987 F.2d 142, 150 (2d Cir. 1993);
Patrowicz v. Transamerica HomeFirst, Inc., 359 F. Supp. 2d 140, 144 (D. Conn.
2005). Here, Defendants attach copies of emails negotiating the terms of sale, the
purchase order for the trailer, and emails memorializing the breakdown of the
parties’ relationship. These documents are integral to the Complaint and may be
considered by the Court.
B. Analysis
The Plaintiff brings claims for breach of contract, violation of CUTSA and
CUTPA, and negligent misrepresentation. Each of these claims arise out of the
Plaintiff’s allegation that the Defendant failed to produce and deliver the
prototype within a reasonable period of time, and that the Defendant improperly
retained specifications for the prototype.
1. Breach of Contract
The purchase order and accompanying emails do not evidence any
agreement about the choice of law applicable to the terms of the sale. The Court
must therefore determine whether the parties’ contract is government by
Connecticut or Quebec law. As this Court’s jurisdiction is based on diversity of
the parties, Connecticut’s choice-of-law rules apply. See Liberty Synergistics Inc.
v. Microflo Ltd., 718 F.3d 138, 153 (2d Cir. 2013) (“[A] federal court exercising
13
diversity jurisdiction must apply the choice-of-law rules of the state in which that
court sits to determine the rules of decision that would apply if the suit were
brought in state court.”). When parties have not effectively selected an
applicable law, Connecticut courts apply the “most significant relationship” test
to determine which law should apply, weighing factors such as “(a) the place of
contracting, which is the place where occurred the last act necessary to give the
contract binding effect; (b) the place of negotiation of the contract; (c) the place
of performance; (d) the location of the subject matter of the contract; and (e) the
domicile, residence, nationality, place of incorporation and place of business of
the parties.” MM Global Servs., Inc. v. Dow Chem. Co., 283 F. Supp. 2d 689, 699
(D. Conn. 2003) (citing Reichhold Chems., Inc. v. Hartford Accident and Indem.
Co., 243 Conn. 401, 409-10 (1997)).
The “last act necessary to give the contract binding effect” occurred in
Connecticut, with the Plaintiff’s e-signing of the purchase order. Negotiation,
performance, and places of business are roughly split between Connecticut and
Quebec. The intended location of the subject matter of the contract is
Connecticut. Although the prototype was never delivered, this factor weighs in
favor of Connecticut, tipping the balance of factors in favor of Connecticut.
Further, neither party argues that the Court should interpret the contract using
Canadian or Quebec law.1 The Court therefore applies Connecticut law.
1
Despite arguing that Connecticut law governs the parties’ agreement, Plaintiff
cites a Canadian statute governing work for hire, which seems to state that the
Plaintiff owns the intellectual property rights in the prototype’s specifications.
[See Dkt. No. 24 at 14-15]. However, a Canadian statute allocating intellectual
property rights over work made in the course of employment, does not create a
14
a. Timeliness
Plaintiff argues that the Defendant breached their contract because the
Defendant failed to deliver the prototype within a reasonable period of time.
Defendant counters that because the parties did not agree to a production or
delivery schedule, it could not have breached this agreement. Indeed, the
Complaint is silent as to whether the parties reached any agreement regarding
the time by which the prototype should have been delivered. The purchase order
is similarly silent, except that it lists a “ship date” of July 10, 2015, which is more
than a month before the Plaintiff signed the final purchase order, and therefore
cannot have been the expected delivery date. While the Plaintiff does state in a
December 1, 2015 email, “I will not budge or negotiate on this [any] longer, I need
to move forward today with our crane supplier,” [Dkt. No 16-7 at 2], he does not
state that the parties had agreed the trailer should be completed on any particular
schedule.
However, where the parties do not agree upon a time for shipment or
delivery, Connecticut’s Uniform Commercial Code provides that the “time for
shipment or delivery . . . shall be a reasonable time.” Conn. Gen. Stat. § 42(a)-2309. The Complaint and accompanying documents show that the purchase order
was finalized on August 15, 2015 and the prototype was completed sometime
near the end of November, 2015. The Defendant has offered no legal precedent
showing that three months represents a reasonable delay for transactions of the
cause of action sounding in contract. The Defendant correctly notes, “If the
Plaintiff believes that [the Defendant] was not in compliance with the work for hire
statute, its remedy is a claim under that law, not a breach of contract claim.”
[Dkt. No. 27 at 8].
15
type at issue in this case. Indeed, whether this three-month delay was reasonable
is a question of fact that would require consideration of standard industry
practices, and it is therefore ill-suited to disposition on a motion to dismiss.
Accepting as true Plaintiff’s allegation that the three-month delay was
unreasonable, the Complaint states a claim that Defendant breached the implied
time limit set forth in Connecticut’s Uniform Commercial Code.
In addition to alleging that a valid contract existed, and that an implied term
of that contract was breached, Plaintiff further alleges it was harmed.
Specifically, Plaintiff alleges that it “would have procured alternative production
avenues for its well-developed specifications if the Plaintiff knew that production
would be significantly delayed.” [Compl. ¶ 39]. Plaintiff also alleges that
“Defendant’s failure to perform in a timely manner harmed Plaintiff.” [Compl. ¶
40]. Finally, Plaintiff’s email to Defendant suggests that Defendant’s failure to
deliver the prototype timely had an adverse effect on the Plaintiff’s prospects.
Plaintiff has thereby sufficiently alleged that it suffered damages under the notice
pleading standard.
The Court notes that the Defendant’s ultimate failure to deliver the
prototype does not constitute a breach of contract. The Plaintiff repudiated the
contract when it told the Defendant by email that it “[would] not be accepting the
trailer and ceasing our relationship with you.” [Dkt. No. 16-7 at 4]. The Defendant
cannot be held liable for failing to deliver a product that it knew would not be
accepted—indeed, by keeping the prototype in Quebec, the Defendant saved
16
itself the cost of transporting the prototype, mitigating its own damages from
Plaintiff’s refusal to accept delivery of the prototype or to pay for it.
b. Ownership of the Specifications
Plaintiff claims that the Defendant breached the parties’ agreement by
retaining copies of the prototype’s specifications. The Complaint alleges
Defendant agreed “to construct a trailer based on the design and other
intellectual property of the Plaintiff.” [Compl. ¶ 4]. Defendant argues that
because the Plaintiff has not pointed to a specific contractual provision dealing
with the ownership of intellectual property, Plaintiff cannot allege that the
retention of the specifications was a breach of contract. [Def. Br. at 12].
However, the liberal pleading standard does not require such specificity. See
Empower Health LLC v. Providence Health Sols. LLC, No. 3:10-cv-1163 JCH, 2011
WL 2194071, at *2 (D. Conn. June 3, 2011) (“The plausibility standard does not
require a complaint to include specific evidence or factual allegations in addition
to those required by Rule 8.” (quotations omitted)). The Court cannot conclude
from the pleadings that the purchase order and emails comprised the whole of
the parties’ agreement absent further factual development. Accepting the
allegations as true, Plaintiff has stated a claim for breach of contract with respect
to the ownership of the specifications. Defendant’s motion to dismiss Count One
of the Complaint is therefore DENIED.
2. Violation of CUTSA
Section 35-51 of the Connecticut General Statutes provides that
misappropriation includes “disclosure or use of a trade secret of another without
17
express or implied consent by a person who . . . at the time of disclosure or use,
knew or had reason to know that his knowledge of the trade secret was . . .
acquired under circumstances giving rise to a duty to maintain its secrecy or limit
its use.” Conn. Gen. Stat. § 35-1(b)(2)(B)(ii). Accepting as true the Plaintiff’s
allegations that the specification contains trade secrets, and that these trade
secrets belong to the Plaintiff, the Court must determine whether the Plaintiff has
sufficiently alleged that the Defendant disclosed or used the intellectual property
contained within the specification. The “use” of a trade secret includes “any
exploitation of the trade secret that is likely to result in injury to the trade secret
owner or enrichment to the defendant.” On-Line Technologies, Inc. v. PerkinElmer Corp., 253 F. Supp. 2d 313, 324 (D. Conn. 2003) (quoting Restatement
(Third) Unfair Competition § 40 cmt. c). Plaintiff alleges that the Defendant
misappropriated its trade secrets by (1) refusing to return the specifications, and
(2) threatening to sell the prototype to a third party. The Plaintiff further alleges
that it has asked the Defendant to return the specification because the Plaintiff
believes the Defendant hopes to use the specification to produce trailers for third
parties. The Court must therefore determine whether the retention of the
specifications is likely to result in the Plaintiff’s injury or the Defendant’s
enrichment.
CUTSA expressly provides that “threatened misappropriation may be
enjoined” and that “affirmative acts to protect a trade secret may be compelled by
court order.” Conn. Gen. Stat. § 35-52. The threat to sell the prototype to a third
party or the threat to use the specification to produce trailers for third parties
18
constitute threatened misappropriation under the statute. Additionally, by the
plain language of the statute, it is within the Court’s power to order the
specification’s return, even if the Defendant has not yet misappropriated the trade
secrets contained within it. The Plaintiff has therefore stated a claim for
injunctive relief for the return of the specification, to prevent the sale of the
prototype, and to prevent the production of future products using the
specification.
Plaintiff has alleged that it has reason to suspect that Defendant enriched
itself through the use of the prototype or specifications. The complaint alleges
that Defendant threatening to sell the trailer to a non-party if Plaintiff did not pay
for the trailer. [Compl. ¶ 13]. Plaintiff has therefore alleged sufficient facts to
state a claim for damages under CUTSA at this pre-discovery stage of the
litigation.
3. Violation of CUTPA
CUTPA provides that “[n]o person shall engage in unfair methods of
competition and unfair or deceptive acts or practices in the conduct of any trade
or commerce.” Conn. Gen. Stat. § 42-110(b). “‘Any person who suffers any
ascertainable loss of money or property, real or personal, as a result of the use or
employment of [an unfair or deceptive act or practice] may bring an action’ to
recover actual damages, punitive damages, and equitable relief.” Fabri v. United
Tech. Int’l, Inc., 387 F.3d 109, 119 (2d Cir. 2004) (quoting Conn. Gen. Stat. § 42110g(a)). “To determine whether a business practice violates CUTPA,
Connecticut courts follow the Federal Trade Commission’s ‘cigarette
19
rule[.]’” Aztec Energy Partners, Inc. v. Sensor Switch, Inc., 531 F. Supp. 2d 226,
232 (D. Conn. 2007). This rule requires satisfaction of at least one of three
factors:
“(1) whether the practice, without necessarily having been previously
considered unlawful, offends public policy as it has been established by
statutes, the common law, or otherwise—whether, in other words, it is
within at least the penumbra of some common law, statutory, or other
established concept of unfairness; (2) whether it is immoral, unethical,
oppressive, or unscrupulous; (3) whether it causes substantial injury to
consumers (or competitors or other businessmen).
Fabri v. United Tech. Int’l, Inc., 387 F.3d 109, 119-20 (2d Cir. 2004); see also
Cheshire Mortgage Serv. Inc. v. Montes, 223 Conn. 80, 106 (1992) (“All three
criteria do not need to be satisfied to support a finding of unfairness.”).
Facts establishing a breach of contract may or may not suffice to establish
a CUTPA violation. Hudson United Bank v. Cinnamon Ridge Corp., 81 Conn. App.
557, 571 (2004); Lester v. Resort Camplands International, Inc., 27 Conn. App. 59,
71 (1992). In order for a breach of contract to rise to the level of a CUTPA
violation, the manner in which the contract was breached must be sufficiently
egregious to offend traditional notions of fairness or to violate public policy.
Boulevard Assocs. v. Sovereign Hotels, Inc., 72 F.3d 1029 (2d Cir. 1995); City of
Bridgeport v. Aerialscope, Inc., 122 F. Supp. 2d 275 (D. Conn. 2000). Plaintiff not
only alleges that Defendant breached the contract by failing to deliver the
prototype timely; it also alleges that Defendant threatened to misappropriate
Plaintiff’s intellectual property if Plaintiff did not accept delivery and pay for the
trailer after Defendant breached the contract. The Complaint can be read to
allege that Defendant engaged in extortionate behavior after the breach of
contract; and thus to allege conduct separate and distinct from the breach of
20
contract. Alternatively, the alleged extortionate behavior may be construed as
aggravating conduct incident to the breach of contract. In either case, Plaintiff
has adequately alleged a CUTPA violation, and the motion to dismiss the CUTPA
claim is DENIED.
4. Negligent Misrepresentation
“One who, in the course of his business, profession or employment . . .
supplies false information for the guidance of others in their business
transactions, is subject to liability for pecuniary loss caused to them by their
justifiable reliance upon the information, if he fails to exercise reasonable care or
competence in obtaining or communicating the information.” D’Ulisse-Cupo v.
Board of Directors of Notre Dame High School, 202 Conn. 206, 218 (1987) (quoting
Restatement (Second) of Torts § 552 (1977)). Plaintiff alleges that the Defendant
“represented an ability to construct for the Plaintiff a prototype and future
production based on the Plaintiff’s specification” and “failed to produce a
prototype in a reasonable time.” [Compl. ¶¶ 33, 35]. Plaintiff further alleges that
it “revealed [its] trade secrets [i]n reliance on [the Defendant’s] promise for
performance as well as secrecy.” [Compl. ¶ 37].
In its opposition, the Plaintiff clarifies that the alleged misrepresentation
was the Defendant’s statement on November 10, 2015 that the Plaintiff’s
prototype was “next in line,” when the prototype “was not, in fact, produced until
late November or early December.” Dkt. No. 24 at 19]. The Plaintiff identifies no
other representations regarding the time within which the Defendant allegedly
promised to complete the prototype. Absent any information regarding the speed
21
with which the Defendant can produce a trailer, the claim that the trailer was
“next in line” and the prototype’s completion a few weeks later could be
consistent. The Plaintiff has therefore failed to allege that this “next in line”
statement was a misrepresentation.
Additionally, although the complaint alleges that the Defendant “made
representations to the Plaintiff of intent to produce, protect, and hold exclusive
the specifications,” [Compl. ¶ 26], the Plaintiff’s briefing makes no reference to
this alleged representation and identifies no representations made by the
Defendant regarding the ownership of the specification. The Court must
therefore conclude that the Plaintiff has abandoned allegations that the
Defendant made misrepresentations regarding the ownership of the specification.
Plaintiff’s negligent misrepresentation claim must therefore be DISMISSED.
VI.
Conclusion
For the foregoing reasons, the Defendant’s Motion to Dismiss, [Dkt. No.
16], is GRANTED IN PART and DENIED IN PART. Count Four is DISMISSED.
IT IS SO ORDERED.
________/s/__ ________
Hon. Vanessa L. Bryant
United States District Judge
Dated at Hartford, Connecticut: August 30, 2017
22
Disclaimer: Justia Dockets & Filings provides public litigation records from the federal appellate and district courts. These filings and docket sheets should not be considered findings of fact or liability, nor do they necessarily reflect the view of Justia.
Why Is My Information Online?