ACME WORLDWIDE ENTERPRISES, INC. v. USA

Filing 55

REPORTED ORDER and OPINION. Signed by Senior Judge Edward J. Damich. (lp1) Service on parties made.

In the United States Court of Federal Claims
No. 17-843C
(Filed: December 16, 2019)
FILED UNDER SEAL
REISSUED FOR PUBLICATION JANUARY 9, 2020 1

******************************************
ACME WORLDWIDE ENTERPRISES, INC.,

*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

Plaintiff,
v.
THE UNITED STATES,
Defendant,
and
INDUSTRIAL SMOKE & MIRRORS, INC.,
Intervenor-Defendant.

Claim Construction; Phillips v. AWH
Corp., 415 F.3d 1303 (Fed. Cir. 2005);
35 U.S.C. § 112; Vitronics Corp. v.
Conceptronic, Inc., 90 F.3d 1576 (Fed.
Cir. 1996); Means-Plus-Function;
Supplemental Briefing

******************************************

John Paul Moran, Holland & Knight, LLP, Washington DC, for Plaintiff.
Conrad J. DeWitte, Jr., Assistant Director, Commercial Litigation Branch, Civil Division, U.S.
Department of Justice, Washington DC, for Defendant.
Thomas Leonard Kautz, GrayRobinson P.A., Fort Lauderdale FL, with whom were Milton
Christopher Johns, FH H, PLLC, Tysons VA, for Intervenor-Defendant.
OPINION AND ORDER
DAMICH, Senior Judge.
This case arises out of Plaintiff, ACME Worldwide Enterprises, Inc.’s (“ACME”),
allegation that Defendant, the United States (the “Government”), violated 28 U.S.C. § 1498
through the use or manufacture of the invention described in United States Patent No. 8,690,575
1

The parties were directed to file any redactions to this opinion by January 6, 2020. The
parties did not propose any redactions to the Court’s December 16, 2019 Opinion. Therefore, the
Court reissues this unsealed opinion in its entirety.

(“the ‘575 patent”). 2 Specifically, the alleged violation arises from Defendant’s use of an
allegedly infringing product produced by Intervenor-Defendant, Industrial Smoke & Mirrors,
Inc. (“ISM”). The ‘575 patent is entitled “Apparatus and Method for a Weapon Simulator” and
relates to a weapon simulator that provides realistic full force recoil at the full rate of fire of an
actual weapon and allows an instructor to alter the recoil rates of a weapon, while in use, to
simulate different malfunctions. This matter is presently before the Court on the parties’ briefs
regarding claim construction. 3 A claim construction hearing was held on December 10, 2019,
where the Court considered the parties’ arguments with respect to the intrinsic and extrinsic
evidence. The Court determined that expert testimony was not necessary, and the parties did not
present expert witnesses.
After fully considering the parties’ arguments, the Court’s interpretation of the disputed
claim terms and phrases are as follows.
I.

The ‘575 Patent

The ‘575 patent teaches a weapon simulator that uses an electric motor and computer to
produce simulated recoil with variable intensity across various types of weaponry. The invention
claims to provide realistic full force recoil and realistic recoil at the full rate of fire of an actual
weapon. ‘575 patent, 2:66–3:8. The invention also allows an instructor to alter the recoil rates
of a weapon, while in use, to simulate different malfunctions such as jams, duds, misfires, and
round cook-off. See generally ‘575 patent.
The following drawing from the ‘575 patent is an example the mechanical portion of an
embodiment of the ‘575 patent’s weapons simulator:

2

A copy of the ‘575 patent is attached to the Complaint in Exhibit B from pages 2–16.

3

The Government and ISM jointly filed their claim construction briefs. As such, the
Court will refer to them collectively as “Defendants,” except when addressing an individual
party.
2

‘575 patent, fig. 2A.
II.

Claim Construction – Legal Standard

Claim construction is a question of law. Markman v. Westview Instruments, Inc., 517
U.S. 370, 388–391 (1996). When the trial court uses only intrinsic evidence (such as the patent
claims and specification, and the patent prosecution history) to construe patent claims, “the
judge’s determination will amount solely to a determination of law, and the Court of Appeals
will review that construction de novo.” Teva Pharm. USA, Inc. v. Sandoz, Inc., 135 S.Ct. 831,
841 (2015). When the trial court utilizes extrinsic evidence to resolve a “subsidiary factual
dispute that helps the court determine the proper interpretation of the written patent claim,” the
Court of Appeals will accept the district court’s finding unless it was “clearly erroneous.” Id. at
841–843. Claim construction is not subject to a burden of proof or evidentiary burden. E.g.
Catalina Marketing Int’l, Inc. v. Coolsavings.com, Inc., 289 F.3d 801, 807 (Fed. Cir. 2002).
Generally, a trial court need not construe claim terms whose meaning the parties do not
dispute. E.g. O2 Micro Int’l Ltd. v. Beyond Innovation Tech. Co., 521 F.3d 1351, 1362 (Fed.
Cir. 2006). Further, a court construing patent claim terms need not adopt the constructions
proposed by the parties, and should determine its own constructions if it determines the parties’
proposals to be legally flawed. E.g. Praxair, Inc. v. ATMI, Inc., 543 F.3d 1306, 1323–24 (Fed.
Cir. 2008), abrogated on other grounds by Nautilus, Inc. v. Boisig Instruments, Inc., 572 U.S.
898, 901 (2014). But see Yoon Ja Kim v. ConAgra Foods, Inc., 465 F.3d 1312, 1319 (Fed. Cir.
2006) (“While we may have the authority to adopt claim constructions which have not been
proposed by either party we should be hesitant to do so.”). The disputed claim terms need only
be construed sufficiently to resolve the particular issues in the case at hand. E.g. Vivid Techs.,
Inc. v. Am. Science & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999).
“It is a bedrock principle of patent law that the claims of a patent define the invention to
which the patentee is entitled the right to exclude.” Phillips v. AWH Corp., 415 F.3d 1303, 1312

3

(Fed. Cir. 2005) (en banc) (citation and internal quotation marks omitted). Accordingly, “[c]laim
construction begins and ends in all cases with the actual words of the claim.” Becton, Dickinson
& Co. v. Tyco Healthcare Grp., LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (citation and internal
quotation marks omitted).
“It is well-settled that, in interpreting an asserted claim, the court should look first to the
intrinsic evidence of the record, i.e., the patent itself, including the claims, the specification and,
if in evidence, the prosecution history.” Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576,
1582 (Fed. Cir. 1996) (citing Markman v. Westview Instruments, Inc., 52 F.3d 967, 979 (Fed.
Cir. 1995); Norian Corp. v. Stryker Corp., 363 F.3d 1321, 1326 (Fed. Cir. 2014). “Words in a
claim are generally given their ordinary and customary meaning.” Vitronics, 90 F.3d at 1582.
However, “a patentee may choose to be his own lexicographer and use terms in a manner other
than their ordinary meaning, as long as the special definition of the term is clearly stated in the
patent specification or file history.” Id.; see also Thorner v. Sony Computer Entertainment
America LLC, 669 F.3d 1362, 1365 (Fed. Cir. 2012) (“To act as its own lexicographer, a patentee
must ‘clearly set forth a definition of the disputed term’ other than its plain and ordinary
meaning.”) (citation omitted). “It is not enough for a patentee to simply disclose a single
embodiment or use a word in the same manner in all embodiments, the patentee must ‘clearly
express an intent’ to redefine the term.” Thorner, 669 F.3d at 1365 (quoting Helmsderfer v.
Bobrick Washroom Equip., Inc., 527 F.3d 1379, 1381 (Fed. Cir. 2008)).
“Thus, second, it is always necessary to review the specification to determine whether the
inventor has used any terms in a manner inconsistent with their ordinary meaning. The
specification acts as a dictionary when it expressly defines terms used in the claims or when it
defines terms by implication.” Id. (citing Markman, 52 F.3d at 979). “Claims must be read in
view of the specification, of which they are a part.” Markman, 52 F.3d at 979.
“Third, the court may also consider the prosecution history of the patent, if in evidence.”
Vitronics, 90 F.3d at 1582. “[T]he prosecution history can often inform the meaning of the claim
language by demonstrating how the inventor understood the invention and whether the inventor
limited the invention in the course of prosecution, making the claim scope narrower than it
would otherwise be.” Phillips v. AWH Corp., 415 F.3d 1303, 1317 (Fed. Cir. 2005). Claim
terms should not be construed one way during prosecution and another way during claim
construction in litigation. See Chimie v. PPG Indus., Inc., 402 F.3d 1371, 1384 (Fed. Cir. 2005).
If intrinsic evidence is not sufficient to construe the disputed terms, extrinsic evidence
such as dictionary definitions and prior art is considered. See Vitronics, 90 F.3d at 1584.
Importantly, “while extrinsic evidence ‘can shed useful light on the relevant art’ . . . it is ‘less
significant than the intrinsic record in determining the legally operative meaning of claim
language.’” Phillips, 415 F.3d at 1317 (quoting C.R. Bard, Inc. v. U.S. Surgical Corp., 388 F.3d
858, 862 (Fed. Cir. 2004)).
III.

Person of Ordinary Skill in the Art (POSA)

In most cases, the qualifications of a person of ordinary skill in the relevant art must first
be determined to sufficiently construe the disputed claim terms. E.g. Phillips, 415 F.3d 1303.

4

However, the Court is not required to define such qualifications if the meanings of the disputed
terms are clear and unambiguous. See Chef Am., Inc. v. Lamb-Weston, Inc., 358 F.3d 1371, 1373
(Fed. Cir. 2004); DSW, Inc. v. Shoe Pavilion, Inc., 537 F.3d 1342, 1347 (Fed. Cir. 2008)
(“[A]bsent contravening evidence from the specification or prosecution history, plain and
unambiguous claim language controls the construction analysis.”). As the Federal Circuit has
explained:
In some cases, the ordinary meaning of claim language as understood by a
person of ordinary sill in the art may be readily apparent even to lay judges,
and claim construction in such cases involves little more than the application
of the widely accepted meaning of commonly understood words.
Phillips, 415 F.3d at 1314.
Here, the Court agrees with the parties that the disputed claim terms largely involve
common non-technical words that are clearly illuminated by reading the intrinsic evidence
provided in the claims, specification, prosecution history, and submitted extrinsic evidence. See
Defs.’ Claim Constr. Brief at 6; Pl.’s Responsive Claim Constr. Brief, ECF No. 50 at 1. As such,
a determination of the level of skill in the relevant art is not necessary.
IV.
Discussion
The parties have asked the Court for claim construction on four terms and phrases
appearing in the ‘575 patent: (1) “dynamically altering a frequency of recoils per second when
the weapon simulator is in use;” (2) “to alter a frequency of recoils per second when the
simulator is in use;” (3) “gun active recoil unit;” and (4) “mounting pintle.” Because of the
similarity between the first two disputed terms, the Court will address those terms together
before addressing the remaining terms.
A. “Dynamically Altering A Frequency Of Recoils Per Second When The
Weapon Simulator Is In Use” and “To Alter A Frequency Of Recoils Per
Second When The Simulator Is In Use”
The phrase “dynamically altering a frequency of recoils per second when the weapon
simulator is in use” appears in apparatus claim 1 and method claim 14, both of which are
independent claims. The parties acknowledge that the phrase “to alter a frequency of recoils per
second when the simulator is in use,” found in independent apparatus claim 25, is nearly
identical to the disputed language in claims 1 and 14 and treat all three claims together. 4 In
pertinent part, these claims provide:
Apparatus Claim 1

Method Claim 14

4

Apparatus Claim 25

The only differences between the language in claim 25 and the language in claims 1 and
14 are: (1) the form of the verb “alter;” and (2) omission of the word “dynamically.”
5

A weapon simulator
comprising:
...
A host computer in
communication with said
gun active recoil unit
wherein the host computer is
capable of dynamically
altering a frequency of
recoils per second when the
weapon simulator is in use.

A method of simulating
weapon recoil with a weapon
simulator comprising:
...

A weapon simulator
comprising:
...

A processor for receiving
The gun active recoil unit
instructions from a host
responding to the signal from computer which may receive
the host computer, wherein
information about said gun
the host computer is capable active recoil unit and
of dynamically altering a
command said gun active
frequency of recoils per
recoil unit through said
second when the weapon
processor to alter a frequency
simulator is in use.
of recoils per second when the
weapon simulator is in use.

‘575 patent, 7:37–45, 8:13–23 (emphasis added). The proposed construction of the parties is as
follows:

“dynamically altering a frequency of recoils per second when the weapon simulator is in use”
Plaintiff’s Construction

Defendants’ Construction

This language has its ordinary meaning – It
has three parts: (1) dynamically performing
an action; (2) the action: “altering a frequency
of recoils per second;” and (3) when the
action occurs: “when the weapon simulator is
in use.” To the extent that Defendant may
have focused on the term “dynamically,”
Plaintiff submits that the term has an ordinary
meaning – it describes some action or event
that occurs when and as needed.

continuously altering a frequency of recoils
per second between non-zero frequencies
when the simulator is being operated

“to alter a frequency of recoils per second when the weapon simulator is in use”
Plaintiff’s Construction

Defendants’ Construction

6

This language has its ordinary meaning – It
has two parts: (1) an action: “altering a
frequency of recoils per second;” and (2)
when the action occurs: “when the weapon
simulator is in use.”

to alter a frequency of recoils per second
between non-zero frequencies when the
simulator is being operated

Joint Claim Constr. Statement, Ex. B.
Plaintiff believes the language in all three terms have an ordinary meaning, while
Defendants argue that construction of these terms “must exclude a simulator system capable of
only a fixed rate of fire when in use.” According to Defendants, the applicants 5 disclaimed
subject matter of a “fixed rate of fire” during the prosecution phase in order to distinguish the
‘575 invention from prior art—the Wolff and Oishi patents—thereby limiting the breadth of
these terms. Defs.’ Claim Constr. Brief, ECF No. 47 at 7–15.
For the reasons set forth below, the Court rejects Defendants’ characterization of the
prosecution history and agrees with the Plaintiff that the phrases have an ordinary meaning.
i.

The Applicants Did Not Disclaim Subject Matter Of A Fixed Rate
Of Fire During The Prosecution Phase

Defendants claim that in distinguishing Wolff and Oishi, the applicants excluded a
“simulator system capable of only a fixed rate of fire when in use.” Defendants argue that the
term “dynamically” in claims 1 and 14 is undefined and proposes that the term be substituted
with “continuously” to better clarify that a fixed rate of fire is not included within these claims.
Defendants also contend that inserting the language “between non-zero frequencies” will clarify
that claims 1, 14, and 25 do not include a simulator with a fixed rate of fire.
The Wolff patent concerns a vehicle-mounted weapon simulator that simulates weapon
recoil by moving the weapon—a machine gun—forwards and backwards within a cradle at a
fixed rate of about 10 Hz. This system uses a pneumatic recoil unit powered by pressurized air
to produce a fixed rate of recoil, which cannot be altered while in use.
In the applicants’ August 21, 2012 Response, the applicants distinguished Wolff on the
grounds that Wolff failed to teach a recoil unit that was “tuneable” or powered by electricity:
The present application at page 4, paragraph 17 identifies that the weapon
simulator is electric and does not contain pneumatics. Further the recoil unit
as described includes variable intensity to fine tune recoil. In contrast, Wolff
teaches a pneumatic recoil unit that is powered by a recoil air cylinder. The
pneumatic recoil unit of Wolff is not tuneable but fixed at 10 Hz for firing.
Defs.’ Claim Constr. Brief, Ex. B at 145. Defendants’ rely on the final line of this quoted
5

The named applicant, Randall S. Gurule, along with the other inventors (collectively
“the applicants”), assigned their rights in the ‘575 patent to ACME on November 17, 2009.
7

language to claim that the applicants disclaimed subject matter of a fixed rate of fire.
In focusing on only this sentence, however, Defendants ignore the prior sentences which
provide necessary context. In particular, Defendants ignore the sentence “the recoil unit as
described includes variable intensity to fine tune recoil.” Read in full, the applicants were stating
that its invention contains features that Wolff does not—namely the ability to produce variable
intensity recoil—which is evident from the applicants’ use of the word “includes.” Although a
simulator capable of only a fixed rate of recoil would be unpatentable in view of Wolff, a
simulator capable of a fixed rate of recoil and variable rates of recoil would not. This conclusion
is supported by the Examiner’s reference to Oishi in a December 6, 2012 response.
In the Examiner’s December 6, 2012 response, the Examiner noted that “Wolff does not
disclose wherein the recoil unit is tuneable or where it is powered by an electric motor,” and
determined that Oishi’s “tuneable recoil” and “the elimination of pneumatics” were “advantages”
over the Wolff system. Defs.’ Claim Constr. Brief, Ex. B at 151 (“It would have been obvious to
one of ordinary skill in the art at the time of the invention to consider such concepts in the Wolff
system in order to provide the established advantages associated with the Oishi system, namely,
tunable recoil and also the elimination of pneumatics.”). Indeed, Oishi teaches a weapon
simulator system that is “tuneable” in that the recoil rate can be altered by physically changing a
weight mechanism in the device when the system is not in use, but once the weight is set, the
recoil rate is fixed.
The invention disclosed in the ‘575 patent is not a system capable of only a fixed rate of
fire. While it could certainly be said that in distinguishing the ‘575 invention from Wolff, the
applicants disclaimed subject matter of a pneumatic recoil system, Defendants go too far in
suggesting a disclaimer of a “fixed rate of fire.” As such, the Court does not agree with
Defendants’ characterization of the ‘575 patent’s prosecution history.
Moreover, as Plaintiff aptly observes, a system that “continuously” changes the rate of
recoil would thwart the primary purpose of a weapon simulator—establishing sufficient
familiarity with gun recoil so as to be able to acquire a target while firing the gun. See Pl.’s
Responsive Claim Constr. Brief at 2. This common sense understanding is reiterated in the
specification. See ‘575 patent, 2:66–3:5 (“One embodiment of the present invention is a weapon
simulator comprising a gun active recoil unit that is designed for training with realistic recoil . . .
Training with realistic recoil enables a trainee . . . to anticipate and adapt to the recoil forces in
order to keep the aiming point of the weapon on target just as is required in the real world.”)
(emphasis added). And a claim construction that excludes the operation of the preferred
embodiment is rarely, if ever, correct. See Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576,
1583–84 (Fed. Cir. 1996). As such, the Court rejects Defendants’ invitation to replace the term
“dynamically” with the term “continuously.”
With regard to Defendants’ argument that insertion of the phrase “between non-zero
frequencies” is necessary to clarify that the ‘575 invention excludes a system capable of only a
fixed rate of fire when in use, such a revision is unnecessary. As explained above, the Court
disagrees with Defendants that the applicants accepted such a limitation during the prosecution
phase. Furthermore, the language “between non-zero frequencies” does not appear in the ‘575

8

patent or in its prosecution history. The Supreme Court has long cautioned against reading “into
a claim an element that is not present,” explaining “if we once begin to include elements not
mentioned in the claim . . . we should never know where to stop.” McCarty v. Lehigh Val R. Co.,
160 U.S. 110, 116 (1895). Although in McCarty it was the patentee arguing for the inclusion of
an element not mentioned in the claims, the Supreme Court’s reasoning equally applicable when
the alleged infringer does so.
Inserting the phrase “between non-zero frequencies” would also exclude the operation of
a preferred embodiment. Both the specification and dependent claims 9, 17, and 18 reference
“malfunctions.” The specification explains that these “malfunctions” include: jams, duds, out of
ammunition, runaway recoil, weapon misfire, weapon sluggishness, and round cook-off. ‘575
patent, 2:9–13, 3:12–14. Of particular note is “weapon misfire,” which the specification
describes as when “the host computer does not send [the] gun active recoil unit 50 recoil signals
even when trigger 24 is depressed.” ‘575 patent, 6:36–38.
Logically, if the host computer does not send recoil signals even when the trigger is
depressed, the frequency of recoil would be zero. Consequently, inserting the phrase “between
non-zero frequencies” would exclude the “weapon misfire” malfunction. A claim construction
that excludes the operation of the preferred embodiment is rarely, if ever, correct. See Vitronics
Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1583–84 (Fed. Cir. 1996); see also Markman v.
Westview Instruments, Inc., 52 F.3d 967, 979 (Fed. Cir. 1995) (“Claims must be read in view of
the specification, of which they are a part.”). Therefore, the Court likewise rejects Defendants’
invitation to insert the phrase “between non-zero frequencies” into the disputed terms.
In sum, the Court finds that the applicants did not disclaim subject matter of a fixed rate
of fire during the prosecution phase when the device also includes other rates of fire variable
when the device is in use. In addition, Defendant’s proposed construction would exclude the
operation of a preferred embodiment. Therefore, the Court declines to replace the term
“dynamically” with “continuously” and similarly declines to insert the phrase “between non-zero
frequencies.”
ii.

“In Use” Has An Ordinary Meaning

Defendants argue that phrase “in use” should be replaced with “being operated” to clarify
that “the invention of claims 1, 14, and 25 must alter a frequency of recoils while it is powered
on and being used as a simulator.” Defs.’ Claim Constr. Brief at 14. Defendants contend that
during the prosecution phase, the applicants accepted this limitation in order to overcome Oishi,
which allows for the rate of fire to be modified only when the system is not in use. Id. at 13–14.
The Court agrees with Plaintiff that the phrase “in use” should be ascribed its plain and
ordinary meaning. There is no meaningful difference between the terms “in use” and “being
operated,” and Defendants’ arguments to the contrary are unpersuasive. While it is true that the
applicants distinguished Oishi on grounds that the ‘575 invention allows the recoil rate to be
altered while the system is in use, whereas the recoil rate in Oishi can be altered only when the
system is not in use, both the applicants and the Examiner used the “in use” language throughout
the prosecution phase. See Defs.’ Claim Constr. Brief, Ex. B at 194 (Applicants’ August 21,

9

2012 Response), Ex. B at 254 (Examiner’s Reasons for Allowance). In fact, “the Examiner
suggested that the language in claims 1 and 25 ‘when the weapon simulator is in use’ was
redundant and could be deleted.” Id. at 243 (Amendment and Response and Examiner Interview
Summary).
Accordingly, the Court holds that the phrase “in use” has a plain and ordinary meaning.
B. “Gun Active Recoil Unit”
The term “gun active recoil unit” appears in apparatus claims 1, 3, 4, 5, and 25, as well as
in method claims 14, 15, and 24. As the term is used in the apparatus claims, the parties focus on
claims 1 and 25, which provide, in relevant part: “A weapon simulator comprising: a gun active
recoil unit comprising a slide tray and at least one electric motor to power the gun active recoil
unit.” As the term is used in the method claims, the parties focus on claim 14, which provides:
A method of simulating weapon recoil with a weapon simulator comprising:
providing a gun mounted to a gun active recoil unit;
squeezing a trigger on the gun to generate a signal;
transmitting the signal from the gun to a host computer in
communication with the gun active recoil unit;
the gun active recoil unit responding to the signal from the host
computer, wherein the host computer is capable of dynamically
altering a frequency of recoils per second when the weapon
simulator is in use; and
simulating recoil via a slide tray disposed on the gun active recoil unit.
‘575 patent, 8:13–24.
The fundamental disagreement between the parties stems from the last line in claim 14:
“simulating recoil via a slide tray disposed on the gun active recoil unit.” (emphasis added). As
Defendants point out, “gun active recoil unit” is defined in claims 1 and 25 as comprising: (1) a
slide tray; and (2) at least one electric motor. Defs.’ Claim Constr. Brief at 24. According to
Defendants, “[c]laim 14 expressly removes the slide tray from the gun active recoil unit by
stating that the slide tray is “disposed on” the gun active recoil unit. Id. Because of this
discrepancy, Defendants contend that “gun active recoil unit” does not have a sufficiently
definite meaning as the name for the structure, and therefore, must be analyzed as a “means-plusfunction” limitation.
Plaintiff, on the other hand, contends that the term “gun active recoil unit” is plain
English and needs no construction. Plaintiff argues that there is no function recited in apparatus
claims 1 or 25, or method claim 14, that would indicate a means-plus-function limitation.
Plaintiff maintains that apparatus claims 1 and 25 provide the meaning of the term: a “gun active
recoil unit” is a mechanical unit with (1) a slide tray and (2) at least one electric motor. Because,
claim 14 is an independent method claim, it defines method steps, not an apparatus. While it is

10

permissible to reference a particular apparatus in a method claim, Plaintiff contends that
description in apparatus claims 1 and 25 control the meaning of “gun active recoil unit.”
For the reasons set forth below, the Court holds that “gun active recoil unit” is not a
means-plus-function term and orders supplemental briefing.
i.

35 U.S.C. § 112(6) Does Not Apply

The term “gun active recoil unit” is not a means-plus-function limitation. Means-plusfunction claiming occurs when a claim term is drafted according to 35 U.S.C. § 112(6), 6 which
provides:
An element in a claim for a combination may be expressed as a means or step
for performing a specified function without the recital of structure, material,
or acts in support thereof, and such claims shall be construed to cover the
corresponding structure, materials, or acts described in the specification and
equivalents thereof.
Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1347 (Fed. Cir. 2015) (en banc). The Federal
Circuit has explained that:
In enacting this provision, Congress struck a balance in allowing patentees to
express a claim limitation by reciting a function to be performed rather than
by reciting structure for performing that function, while placing specific
constraints on how such a limitation is to be construed, namely, by restricting
the scope of coverage to only the structure, materials, or acts described in the
specification as corresponding to the claimed function and equivalents
thereof.
Id. at 1347–1348 (citing Northrop Grumman Corp. v. Intel Corp., 325 F.3d 1346, 1350 (Fed. Cir.
2003).
Claim construction of a means-plus-function limitation includes two steps. “First, the
court must determine the claimed function.” Applied Medical Resources Corp. v. U.S. Surgical
Corp., 448 F.3d 1324, 1332 (Fed. Cir. 2006) (citing JVW Enters. v. Interact Accessories, Inc.,
424 F.3d 1324, 1330 (Fed. Cir. 2005). “Second, the court must identify the corresponding
structure in the written description of the patent that performs that function.” Id.
Here, Defendants fail to identify any function in the eight claims containing the term
“gun active recoil unit” that would indicate mean-plus-function claiming. Instead, they argue
that the specification provides the function expressing a § 112(6) limitation. See Defs.’ Claim
6

Section 112 was amended and the subsections re-designated by the Leahy-Smith
America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), which took effect on
September 16, 2012. Because the applications resulting in the ‘575 patent were filed before that
date, the pre-AIA version of § 112 is applicable to the ‘575 patent.
11

Constr. Brief at 25–26. However, § 112(6) applies only where a claim describes a “specified
function without the recital of structure, materials, or acts in support thereof . . . .” See 35 U.S.C.
§ 112(6). As such, the Court agrees with the Plaintiff that the term “gun active recoil unit” is not
a means-plus-function limitation.
ii.

Supplemental Briefing

The Court requires supplemental briefing on the construction of “gun active recoil unit.”
Although the Court agrees with Plaintiff that 35 U.S.C. § 112(6) does not apply, the Court is
troubled by the inconsistency in the description of “gun active recoil unit” in claims 1 and 25, on
the one hand, and claim 14, on the other. The Court is specifically interested in the parties’
arguments regarding the rule of internal consistency, which is, that the same phrase used in
different claims of the same patent should have the same meaning and, if this rule applies, what
is the ramification of its application on this patent? Does the inconsistency in the meaning of
“gun active recoil unit” render the patent indefinite? In addition, the Court needs to be briefed
on the application of § 282(a), which states that: “Each claim of a patent (whether in
independent, dependent, or multiple dependent form) shall be presumed valid independently of
the validity of other claims.” See 35 U.S.C. § 282(a).
C. “Mounting Pintle”
The term “mounting pintle” appears in dependent claim 3, which provides: “The weapon
simulator of claim 1 wherein said gun active recoil unit comprises a plurality of mounting
pintles.” ‘575 patent, 7:48–49. The proposed construction of the parties is as follows:

“mounting pintle”
Plaintiff’s Construction
This language has its ordinary meaning – A
pintle is a common and ordinary term that
refers to “a mount that allows the gun to
rotate.”

Defendants’ Construction
a fixed mount that allows a weapon to be
rotated in at least one of elevation or azimuth,
while keeping the gun in one fixed position,
where the mounting is a rod attached to the
underside of the gun that mates with a socket

Joint Claim Constr. Statement, Ex. B.
Plaintiff argues that “mounting pintle” is a common term used to describe how a movable
structure is mounted and contends that the specification uses the term in its ordinary sense. Pl.’s
Claim Constr. Brief at 11. On the other hand, Defendants argue that “a pintle is a specific type
of gun mount” and “not all gun mounts are pintles.” Defs.’ Claim Constr. Brief at 16.
Defendants claim that their construction is based on references available to the public which
show what a person of ordinary skill in the art would understand a mounting pintle to mean. Id.
For the reasons set forth below, the Court defines “mounting pintle” as “a mount,
12

containing a pintle, that allows the gun to rotate.”
i.

Claim Term Read in Light of the Specification

The starting point in claim interpretation is the ordinary and customary meaning of the
claim. See Becton, Dickinson & Co. v. Tyco Healthcare Grp., LP, 616 F.3d 1249, 1254 (Fed.
Cir. 2010); Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (“words
in a claim are generally given their ordinary and customary meaning”). However, “[c]laims must
be read in view of the specification, of which they are a part.” Markman v. Westview
Instruments, Inc., 52 F.3d 967, 979 (Fed. Cir. 1995).
The parties cite to the specification, column 4, lines 42–47, for their respective
arguments. See Pl.’s Claim Constr. Brief at 11–12; Defs.’ Claim Constr. Brief at 15–16. This
section provides:
In one embodiment of the present invention . . .
Mounting pintles can include but are not limited to pins, brackets, clamps,
screws, bolts, threaded attachments, and combinations thereof. The
mounting pintle supports a weapon (or unit with weapon). The pintle allows
the rotation of the weapon system to aim in different directions. Pintles allow
rotation in elevation, azimuth, or both.
‘575 patent, 4:42–47.
In addition, the parties rely on the drawings in figures 2B, 2C, 6, and 7 of the ‘575 patent.
Figures 2C and 6 provide illustrations of the pintle 34 for mounting in the CH-46:

‘575 patent, figs. 2C, 6; see also 2:55–56; 4:52–55. Figures 2B and 7 provide illustrations of the
pintle 32 for mounting in the CH-53:

13

‘575 patent, figs. 2B, 7; see also 2:57–58; 4:52–55.
Plaintiff argues that the term “mounting pintle” is used in accordance with its plain and
ordinary meaning and makes no suggestion that the drafter intended to act as his own
lexicographer. According to Plaintiff, the examples provided in the ‘575 patent are expressly
only illustrative, as indicated by the phrase “[m]ounting pintles can include but are not limited to
. . . .” Pl.’s Responsive Claim Constr. Brief at 9. Plaintiff also notes that the language quoted
from the specification is expressly within the description of an embodiment of the invention, and
maintains that it is improper to rely upon an embodiment in the specification to limit the
construction of a term, even when it reflects a single or preferred embodiment. In addition,
Plaintiff argues that if the Court were to adopt Defendants’ proposed construction, a whole new
set of terms within that construction would need to be construed, such as: “rod,” “attachment,”
“underside of the gun,” “mates,” and “socket.” Id. at 10–11.
Defendants’ position, on the other hand, is that “while all pintles are gun mounts, not all
gun mounts are pintles.” Def.’s Responsive Claim Constr. Brief, ECF No. 49 at 7. Defendants
explain that “pintles are fixed mounts where a rod is attached to the underside of the gun and the
rod mates with a socket, allowing the weapon to be rotated in at least one of elevation or
azimuth, while keeping the gun in one fixed position.” Id. Defendants contend that Plaintiff’s
construction would impermissibly sweep non-pintle mounts into the claimed limitation, such as a
bipod mount that allows the weapon to be fired at different elevations but does not allow for
horizontal movement. Id.
The Court concludes that “mounting pintle” should be defined as “a mount, containing a
pintle, that allows the gun to rotate.” There is no indication that the drafter of the ‘575 patent
intended to act as his own lexicographer with respect to the term “mounting pintle.” See Thorner
v. Sony Computer Entertainment America LLC, 669 F.3d 1362, 1365 (Fed. Cir. 2012) (“It is not
enough for a patentee to simply disclose a single embodiment or use a word in the same manner
in all embodiments, the patentee must ‘clearly express an intent’ to redefine the term.”) (citation
omitted). The specification and drawings show that “mounting pintle” is a structural limitation
14

with two components: (1) a mount, which can include but is not limited to pins, brackets, clamps,
screws, bolts, threaded attachments, and combinations thereof; and (2) a pintle. The mount is a
structure that attaches to the gun and allows for rotation in one direction, and the pintle is a rod
or pin that attaches to a structure, such as a tripod, and allows for rotation in another direction.
This conforms with the description provided in the specification. See ‘575 patent, 4:42–47 (“The
pintle allows the rotation of the weapon system to aim in different directions. Pintles allow
rotation in elevation, azimuth, or both.”).
ii.

Extrinsic Evidence

The dictionary definitions proffered by the parties do not provide any meaningful clarity.
Defendants cite to the 2003 edition of the McGraw-Hill Dictionary of Scientific and Technical
Terms, which defines “pintle” as “a vertical pivot pin, as on a rudder or a gun carriage.” This
dictionary defines “gun carriage” as “mobile or fixed support for a gun; sometimes includes the
elevating and traversing mechanisms.” McGraw-Hill Dictionary of Scientific & Technical Terms
932 (6th ed. 2003). Plaintiff cites to Webster’s New Collegiate Dictionary 150th Anniversary
Edition, 1981, which defines “pintle” as “a usu. upright pivot pin on which another part turns.”
Thus, the parties seem to agree that a “pintle” is a vertical or upright pivot pin.
Although the proffered dictionary definitions do not provide meaningful clarity,
Defendants cite to two weapons manuals that do. The U.S. Army Field Manual No. 3-22.68,
Crew-Served Machine Guns, 5.56-mm and 7.62-mm (Jan. 31, 2003) (“Army Field Manual”) and
Detroit Arsenal, Ordnance Corps, U.S. Army, Weapon Mounts for Secondary Armament (April
1957) (“Weapon Mounts for Secondary Armament”), both provide illustrations of “pintles” that
align with the drawings in the ‘575 patent. See Joint Claim Constr. Statement, Ex. D; Defs.’
Claim Constr. Brief, Ex. I. (Army Field Manual), Ex. J (Weapon Mounts for Secondary
Armament). For example, the Army Field Manual provides the following illustration of a
“pintle,” labeled 1, as it is used to mount a M240B machine gun on a tripod:

15

U.S. Army Field Manual at 3-35.
While the illustrations in both manuals refer to the structure as a “pintle” rather than
“mounting pintle,” they are consistent in containing: (1) a fork-like “mount” that attaches to the
weapon; and (2) a vertical pin or rod that attaches to another structure, such as a tripod. See
Army Field Manual at 3-34 to 3-35; Weapon Mounts for Secondary Armament at 219, 234, 236,
238, 239. And this structure is consistent with the drawings found in figures 2B, 2C, 6, and 7 of
the ‘575 patent. As such, these manuals bolster the Court’s conclusion that a “mounting pintle”
is “a mount, containing a pintle, that allows the gun to rotate.”
V.

Conclusion

The Court concludes that the phrases “dynamically altering a frequency of recoils per
second when the weapon simulator is in use” and “to alter a frequency of recoils per second
when the simulator is in use” have a plain and ordinary meaning. The Court defines “mounting
pintle” as “a mount, containing a pintle, that allows the gun to rotate.” With respect to “gun
active recoil unit,” the Court agrees with Plaintiff that this term is not a means-plus-function
limitation. However, the Court is troubled by the inconsistency in the description of “gun active
recoil unit” in claims 1 and 25, on the one hand, and claim 14, on the other, and therefore
ORDERS supplemental briefing on the following:
1. Does the rule of internal consistency apply to the term “gun active recoil unit,” and if
so, what is the ramification of its application on the ‘575 patent?
2. Does the inconsistency in the meaning of “gun active recoil unit” render the ‘575
16

patent indefinite?
3. In answering these questions, the parties should address the application, if any, of 35
U.S.C. § 282(a), which provides: “Each claim of a patent (whether in independent,
dependent, or multiple dependent form) shall be presumed valid independently of the
validity of other claims.” See 35 U.S.C. § 282(a).
The parties shall file simultaneous supplemental briefs, not to exceed 10 pages, addressing
the questions above regarding construction of the term “gun active recoil unit” on or before
January 17, 2020. The supplemental briefing ordered herein shall be confined to the questions
presented by the Court. Extraneous matter will not be considered.
Furthermore, the parties are directed to file redactions to this opinion, if any, by no later
than Monday, January 6, 2020.
IT IS SO ORDERED.
s/Edward J. Damich
EDWARD J. DAMICH
Senior Judge

17