Victaulic Company v. Romar Supply, Incorporated

Filing 52

OPINION AND ORDER that the 40 Motion to Stay is GRANTED. IT IS FURTHER ORDERED that the actions is STAYED until further order of the Court. The parties shall advise the Court when the proceedings in Mueller v. Victaulic are concluded. Signed by Judge William S. Duffey, Jr on 3/18/2015. (anc)

I.

BACKGROUND
A.

Mueller v. Victaulic

Anvil International, LLC (“Anvil”) is a New Hampshire company that
produces applications used in the construction industry. Anvil is a subsidiary of
Mueller Water Products, Inc. (“Mueller”), an Atlanta based company that
manufactures and markets products used in the transmission, distribution and
measurement of water in North America. Anvil created a rigid pipe coupling
known as the SlideLOK, which joins two pipe segments together by forming a
water-tight seal at the end of the pipe segments. Plaintiff Victaulic Company
(“Victaulic”), based in Pennsylvania, is a competitor of Anvil in the mechanical
pipe joining market and owns Patents Nos. 7,086,131 (“the ′131 Patent”) and
7,712,796 (“the ′796 Patent”).
In January 2012, Mueller filed an inter partes reexamination request with the
U.S. Patent and Trademark Office (“USPTO”) for the ′131 and ′796 Patents. The
USPTO granted the request for reexamination of the ′131 Patent and some of the
claims of the ′796 Patent.
On October 3, 2012, Anvil and Mueller filed a declaratory action against
Victaulic in this Court for patent invalidity, seeking a declaration that the ′131 and
′796 Patents are invalid or, in the alternative, that SlideLOK does not infringe the

2

Patents (1:12-cv-03446, “Mueller v. Victaulic”). On October 19, 2012, Victaulic
filed an action against Anvil in the District Court for the Eastern District of
Pennsylvania (“EDPA”), and alleged that the SlideLOK coupling infringed on the
′131 and ′796 Patents.
On September 26, 2013, Judge Carnes issued an Order in
Mueller v. Victaulic staying the litigation pending the outcome of the USPTO
reexaminations of the ′131 and ′796 Patents. Judge Carnes administratively
terminated the case during the stay, and ordered that any party may reopen the
action within 60 days of the USPTO’s decision on the pending reexaminations or
for good cause shown. The patent infringement action in Mueller v. Victaulic is
currently pending before Judge Jones.
On October 7, 2013, the District Court for the EDPA dismissed Victaulic’s
Complaint without prejudice to avoid the possibility of inconsistent results on the
same facts at issue in Mueller v. Victaulic. The District Court for the EDPA
allowed Victaulic’s claims before it to be preserved as compulsory counterclaims
in Mueller v. Victaulic.
On November 14, 2014, Victaulic moved to lift the stay and reopen the
case in Mueller v. Victaulic, including because the complaint against Anvil was
dismissed in the District Court for the EDPA, and the USPTO had found all claims

3

of the ′796 Patent to be valid. On March 16, 2015, Judge Jones denied Victaulic’s
Motion to lift the stay and reopen the case. Judge Jones found that Victaulic
prolonged the inter partes reexamination of the ′131 Patent by challenging the
USPTO’s decision regarding the ′131 Patent’s reexamination, and by “requesting
that the reexaminations continue.” Order on the Mot. to Stay in
Mueller v. Victaulic, at 9. Judge Jones also found that the USPTO had not reached
a final decision regarding the ′796 Patent because Plaintiffs had not exhausted their
right to appeal the USPTO’s decision regarding its validity. Id. at n.1. Based on
(1) the pending reexamination proceedings of the Patents that may potentially
simplify the issues, (2) the early stage of the litigation, and (3) the absence of
undue prejudice to Victaulic, Judge Jones continued the stay in
Mueller v. Victaulic and administratively terminated the case.
B.

Victaulic v. EIS and Victaulic v. Romar

On July 15, 2013, Victaulic filed a Complaint against Eastern Industrial
Supplies Inc. (“EIS”) in the District Court for the District of South Carolina. On
July 17, 2013, Victaulic filed a Complaint against Romar Supply, Inc. (“Romar”)
in the District Court for the Northern District of Texas. These are both
infringement actions, in which Victaulic alleges that EIS and Romar infringed on
the ′131 and ′796 Patents by selling SlideLOK and inducing third parties to use the

4

allegedly infringing product. EIS and Romar claim that they are merely
distributors or resellers of Anvil’s product.
On November 14, 2013, the District Court for the Northern District of Texas
granted Romar’s Motion to Transfer the action to this Court under the first to file
rule. On December 6, 2013, the District Court for the District of South Carolina
granted EIS’s Motion to Transfer to this Court also under the first to file rule.
On December 3, 2013, and January 8, 2014, respectively, EIS and Romar
moved to dismiss or, in the alternative, to stay the actions filed by Victaulic under
the first to file rule. Dismissal is not appropriate because a court typically declines
to exercise jurisdiction over the same claims that involve the same parties in a
different forum. See Curtis v. Citibank, 226 F.3d 133, 140 (2d Cir. 2000) (holding
that a district court has the authority to dismiss an action if it involves the same
parties or their privies and arises out of the same transaction or series of
transactions as the first suit); see also Borrero v. United Healthcare of New York,
Inc., 610 F.3d 1296, 1306-09 (11th Cir. 2010) (discussing the related doctrine of
claim preclusion and its judicial purpose). The issue here is whether the Court
should stay the actions filed against Romar and EIS under the first to file rule or
the customer suit exception because EIS and Romar are peripheral participants in
the patent dispute between Victaulic and Anvil.

5

II.

DISCUSSION
The Court has the inherent power to manage its docket and stay proceedings,

and the decision whether to stay a case rests “within the sound discretion of the
Court.” See Ethicon, Inc. v. Quigg, 849 F.2d 1422, 1426-27 (Fed. Cir. 1988). In
determining whether to stay a patent infringement action, courts typically weigh
the following factors: (1) whether a stay will unduly prejudice or present a clear
tactical disadvantage to the nonmoving party, (2) whether a stay will simplify the
issues, and (3) whether discovery is complete and a trial date has been set. See
Robior Marketing Group v. GPS Indus. Inc., 633 F. Supp. 2d 1341, 1347 (S.D. Fla.
2008); Baxa Corp. v. ForHealth Tech., Inc., No. 6:06-cv-0353-Orl-19JGG, 2006
WL 4756455, at *1 (M.D. Fla. May 5, 2006).
The “‘first to file rule’ is a doctrine of federal comity, intended to avoid
conflicting decisions and promote judicial efficiency, that generally favors
pursuing only the first-filed action when multiple lawsuits involving the same
claims are filed in different jurisdictions.” Merial Ltd. v. Cipla Ltd., 681 F.3d
1283, 1298 (Fed. Cir. 2012). Competing lawsuits involving the same issues in
separate actions waste judicial resources and can lead to conflicting results. See
Thomas Betts Corp. v. Hayes, 222 F. Supp. 2d 994, 996 (W.D. Tenn. 2002).
“[W]here two actions involving overlapping issues and parties are pending in two

6

federal courts, there is a strong presumption across the federal circuits that favors
the forum of the first-filed under the first-filed rule.” Manuel v. Convergys Corp.,
430 F.3d 1132, 1135-36 (11th Cir. 2005). Under the first to file rule, a district
court may choose to stay or transfer a duplicative action that is filed in another
court. Merial Ltd., 681 F.3d at 1298. The first action concerning the ′131 and ′796
Patents was filed in Mueller v. Victaulic.
Regardless of when an action is filed, in patent cases, there is a “customer
suit” exception to the first to file rule that gives priority to actions against a
manufacturer. This exception “exists to avoid, if possible, imposing the burdens of
trial on the customer, for it is the manufacturer who is generally the ‘true
defendant’ in the dispute.” In re Nintendo of America, Inc., 756 F.3d 1363, 1365
(Fed. Cir. 2014); see also Katz v. Lear Siegler, Inc., 909 F.2d 1459, 1464 (Fed. Cir.
1990) (citation omitted) (“[L]itigation against or brought by the manufacturer of
infringing goods takes precedence over a suit by the patent owner against
customers of the manufacturer.”); Spread Spectrum Screening LLC v. Eastman
Kodak Co., 657 F.3d 1349, 1357 (Fed. Cir. 2011).
In Nintendo, the Federal Circuit applied the “customer suit exception” to
actions against the distributors of Nintendo, and held that “since Nintendo’s
liability is predicate to recovery from any of the defendants, the case against

7

Nintendo must proceed first, in any forum . . . we conclude that the district court
should have exercised its discretion to grant the [stay].” 756 F.3d at 1366.
The customer-suit exception applies here because EIS and Romar, as distributors
of Anvil’s products, merely sell SlideLOK. Recovery from EIS and Romar is
dependent upon a resolution of the infringement and validity of the Patents, which
is a focus of the litigation between Anvil and Victaulic.
The Court concludes that Victaulic’s actions against EIS and Romar are
required to be stayed pending the resolution of validity and infringement pending
in Mueller v. Victaulic. Staying these actions to allow a resolution of the patent
validity and infringement claim in Mueller v. Victaulic avoids potentially
inconsistent results and otherwise promotes litigation efficiency.
III.

CONCLUSION
Accordingly, for the foregoing reasons,
IT IS HEREBY ORDERED that Defendant Romar Supply, Inc.’s Motion

to Stay the action in Victaulic v. Romar, 13-cv-03788-WSD [40], and Defendant
Eastern Industrial Supplies, Inc.’s Motion to Stay the action in Victaulic v. EIS,
13-cv-04050-WSD [52] are GRANTED.
IT IS FURTHER ORDERED that the actions in Victaulic v. Romar and
Victaulic v. EIS are STAYED until further order of the Court. The parties shall

8

advise the Court when the proceedings in Mueller v. Victaulic are concluded.

SO ORDERED this 18th day of March, 2015.

_______________________________
WILLIAM S. DUFFEY, JR.
UNITED STATES DISTRICT JUDGE

9