Snap-on Incorporated
Filing
166
MEMORANDUM OPINION signed by the Honorable Charles P. Kocoras on 7/11/2012.Mailed notice(sct, )
UNITED STATES DISTRICT COURT
NORTHERN DISTRICT OF ILLINOIS
EASTERN DIVISION
SNAP-ON INCORPORATED,
Plaintiff,
vs.
ROBERT BOSCH, LLC, ROBERT BOSCH,
GmbH, and BEISSBARTH GmbH,
Defendants.
)
)
)
)
)
)
)
)
)
)
09 C 6914
MEMORANDUM OPINION
CHARLES P. KOCORAS, District Judge:
This matter comes before the Court on Defendant Beissbarth GmbH’s
(“Beissbarth”) and Robert Bosch, GmbH’s (“Bosch Germany”) (collectively, the
“German Defendants”) motions to dismiss Plaintiff Snap-on Inc.’s (“Snap-on”)
complaint pursuant to Federal Rule of Civil Procedure 12(b)(6). For the reasons stated
herein, the German Defendants’ motions are denied.
BACKGROUND 1
On November 3, 2009, Snap-on filed a complaint against Robert Bosch, LLC
(“Bosch USA”) alleging that Bosch USA infringed on several of its patents relating to
1
For the purposes of a motion to dismiss, the Court accepts all well-pleaded allegations in
the complaint as true. Justice v. Town of Cicero, 577 F.3d 768, 771 (7th Cir. 2009).
a wheel aligner used to service automobiles. On August 18, 2011, Snap-on filed an
amended complaint, in which it added Bosch Germany and Beissbarth as defendants.
Both Bosch Germany and Beissbarth are corporations organized under the laws of
Germany. Beissbarth and Bosch USA are subsidiaries of Bosch Germany, and the
presidents of these two subsidiaries hold high-level management positions at Bosch
Germany. Additionally, the companies share physical assets and intellectual property.
The German Defendants distribute their products for sale in North America through
Bosch USA.
For purposes of the Defendants’ Motions, we must accept all well-pleaded facts
as true. Snap-o alleges that the German Defendants worked together with Bosch USA
“in a coordinated effort to bring [the infringing aligner] to the United States market.”
Bosch Germany directed the activity that resulted in the sale of the infringing wheel
aligner in the United States. To facilitate the introduction of the infringing aligner in
the United States, Bosch Germany acquired Beissbarth, a company experienced in the
manufacture of diagnostics equipment such as wheel aligners. The German Defendants
and Bosch USA (collectively, “Defendants”) then allegedly engaged in a joint
enterprise to sell the infringing aligner in the United States.
The Defendants
collectively participated in sales of the wheel aligner, held several meetings in Illinois
related to the sale of the infringing aligner, conducted testing on the wheel aligner in
-2-
Illinois, and trained technicians on the proper maintenance and operation of the wheel
aligner in Illinois.
On January 16, 2012, the German Defendants filed motions to dismiss for lack
of personal jurisdiction pursuant to Federal Rule of Civil Procedure 12(b)(2). The
Court allowed limited discovery into the jurisdictional issue, which is still ongoing.
Meanwhile, on May 4, 2012, the German Defendants filed the instant motions to
dismiss Snap-on’s complaint for failure to state a claim pursuant to Federal Rule of
Civil Procedure 12(b)(6).
LEGAL STANDARD
A Rule 12(b)(6) motion to dismiss is used to test the legal sufficiency of a
complaint. To state a claim, the allegations in the complaint must set forth a “short and
plain statement of the claim showing that the pleader is entitled to relief.” Fed. R. Civ.
P. 8(a)(2). While detailed factual allegations are not required, a plaintiff must provide
enough factual support to raise her right to relief above a speculative level. Bell Atl.
Corp. v. Twombly, 550 U.S. 544, 555 (2007). “Threadbare recitals of the elements of
a cause of action, supported by mere conclusory statements, do not suffice;” rather, a
claim must provide sufficient factual matter “to state a claim to relief that is plausible
on its face.” Ashcroft v. Iqbal, 129 S.Ct. 1937, 1949 (2009) (citing Twombly, 550 U.S.
at 570). In ruling on a motion to dismiss, a court accepts all well-pleaded facts and
-3-
allegations as true and draws all reasonable inferences in the plaintiff’s favor. Justice
v. Town of Cicero, 577 F.3d 768, 771 (7th Cir. 2009).
DISCUSSION
I.
Timeliness of Motion
Snap-on contends that the German Defendants’ motions to dismiss for failure to
state a claim are procedurally improper because they previously filed motions to dismiss
for lack of personal jurisdiction. Federal Rule of Civil Procedure 12(g)(2) provides that
“a party that makes a motion under this rule must not make another motion under this
rule raising a defense or objection that was available to the party but omitted from its
earlier motion.” Although the German Defendants filed their current motions to dismiss
after filing their motions to dismiss for lack of personal jurisdiction, refusing to consider
the merits of the instant motions would run afoul of the underlying purpose of Rule
12(g). The consolidation requirements of Rule 12(g) are designed to prevent piecemeal
litigation, which delay the judicial process. See Ennenga v. Starns, 677 F.3d 766, 773
(7th Cir. 2012). In this case, the adjudication of the German Defendants’ Rule 12(b)(6)
motions would promote judicial efficiency by advancing the litigation. The Court had
previously allowed limited discovery to resolve the parties’ jurisdictional dispute raised
in the German Entities’ Rule 12(b)(2) motion to dismiss for lack of personal
jurisdiction, and that discovery is highly contested and still ongoing. If the German
-4-
Defendants are successful on their motion to dismiss for failure to state a claim, it would
obviate the need for the ongoing jurisdictional discovery.
The German Defendants, having sought prior leave of the Court to file their Rule
12(b)(6) motions, represented that the motions were filed, in part, to avoid the time,
expenses, and resources involved in resolving their jurisdictional dispute. There is no
dilatory motive in the German Defendants’ motions to dismiss for failure to state a
claim, and the motions promote rather than hinder the policy underlying Rule 12(g).
See Donelli v. Peters Secs. Co., No. 02 C 0691, 2002 WL 2003217, at *4 (N.D. Ill. Aug.
29, 2002) (allowing a Rule 12(b)(6) motion to dismiss that was filed after a fully
adjudicated Rule 12(b)(7) motion to dismiss because the motion was “not filed for the
purpose of delay” and the “adjudication of the [Rule 12(b)(6)] motion would narrow the
scope of the matter, greatly expediting resolution of the case”). Accordingly, the
German Defendants’ motions are not contrary to the Federal Rules of Civil Procedure,
and we will therefore consider the substance of the motions over Snap-on’s objections.
II.
Direct Infringement
A patent holder may sustain a cause of action for direct infringement against
anyone who “without authority makes, uses, offers to sell, or sells any patented
invention within the United States.” 35 U.S.C. § 271(a). The German Defendants
-5-
maintain that Snap-on has failed to allege that any infringing activity attributable to
them took place in the United States.
“It is well established that the reach of Section 271(a) is limited to infringing
activities that occur within the United States.”
MEMC Elec. Materials, Inc. v.
Mitsubishi Materials Silicon Corp., 420 F.3d 1369, 1375 (Fed. Cir. 2005) (citation
omitted). Snap-on contends that the amended complaint states a claim for direct
infringement because it alleges that the German Defendants: (1) sold or offered to sell
the infringing product in the United States; and (2) used the infringing product in the
United States.
A.
“Offer to Sell or Sell”
Snap-on’s amended complaint alleges that the German Defendants “worked
together in a coordinated effort” to bring the wheel aligner to the United States. In
particular, Snap-on expressly alleges that the Defendants sold the infringing aligner in
the United States. The German Defendants challenge the sufficiency of this allegation
for two reasons. First, the German Defendants maintain that this allegation is deficient
because it does not identify which Defendant sold the aligner. However, Snap-on’s use
of the collective term “Defendants,” without distinguishing among the acts of each
Defendant, is not fatal to its claim at this stage of the litigation. See McZeal v. Spring
Nextel Corp., 501 F.3d 1354, 1357 (Fed. Cir. 2007) (reversing district court’s dismissal
-6-
of a complaint alleging that related defendants had offered an infringing product for sale
without identifying which of the defendants had specifically offered the product for
sale). Moreover, because this allegation collectively refers to “Defendants” whereas
other allegations target specific defendants by name, we can reasonably infer that Snapon is alleging that the Defendants collectively sold the infringing aligner in the United
States.
Second, the German Defendants contend that Snap-on’s allegation does not
plausibly suggest that they were involved in the sale of the infringing aligner within the
United States. The German Defendants rely heavily on MEMC Elec. Materials, Inc.,
v. Mistubishi Materials Silicon Corp., in which the Federal Circuit considered whether
a defendant had sold or offered to sell an allegedly infringing product in the United
States. 420 F.3d 1369 (Fed. Cir. 2005). Defendant Sumitomo Mitsubishi Silicon
Corporation (“SUMCO”) was a Japanese corporation that manufactured silicon wafers
exclusively in Japan for use in the semiconductor industry. Id. at 1372. SUMCO sold
its wafers to Samsung Japan Corporation (“Samsung Japan”), which in turn sold the
wafers to Samsung Austin Semiconductor (“Samsung USA”), located in Austin, Texas.
Id. Plaintiff MEMC filed a patent infringement suit against SUMCO, alleging that
SUMCO’s silicon wafers infringed MEMC’s patents.
The district court granted
SUMCO’s motion for summary judgment on the basis that MEMC failed to offer
-7-
sufficient evidence that SUMCO sold or offered to sell the infringing product within the
United States. Id. at 1371.
In affirming the district court’s decision, the Federal Circuit observed that
“determining the location of a ‘sale’ under Section 271(a) is not necessarily where legal
title passes; the ‘more familiar places of contracting and performance may take
precedence over the passage of legal title.’” Id. at 1377 (quoting N. Am. Phillips Corp.
v. Am. Vending Sales, Inc., 35 F.3d 1576, 1579 (Fed. Cir. 1994)). The court found that
the plaintiff failed to identify any negotiations in the United States between SUMCO
and Samsung USA, and therefore there was no offer to sell the infringing wafer in the
United States. Id. The court further noted the lack of any evidence that title of the
infringing wafers passed directly from SUMCO to Samsung USA, but rather that
Samsung Japan served as an intermediary through which SUMCO fulfilled Samsung
USA’s orders. Id.
In stark contrast to the facts of MEMC, Snap-on alleges that substantial activity
took place in the United States between and among the Defendants. In particular, Snapon maintains that the Defendants have directly shipped and invoiced many of their
initial sales to an Illinois address. Moreover, the Defendants held meetings in Illinois
concerning the infringing product, allowing for the reasonable inference that some
contract negotiations occurred in the United States. Finally, unlike in MEMC, the
-8-
German Defendants did not sell their product to a foreign intermediary, but rather they
delivered the product directly to Bosch USA. Therefore, Snap-on has asserted a viable
claim for direct infringement based on the German Defendants’ sale or offer to sell the
infringing product in the United States.
B.
“Use”
Additionally, Snap-on alleges that the German Defendants used the infringing
product in Illinois. The “inquiry as to what constitutes a ‘use’ of a patented item is
highly case-specific.” Medical Solutions, Inc. v. C Change Surgical LLC, 541 F.3d
1136, 1140 (Fed. Cir. 2008). A defendant “uses” a patented product by “put[ting] it into
action or service.” Id. at 1141. Here, Snap-on maintains that the Defendants tested the
field operation of the infringing aligner in Illinois and trained technicians in the
operation and repair of the aligner in Illinois. Based on these allegations, we can
reasonably infer that the German Defendants put the wheel aligner into action or service
in order to both test it and to train technicians in the proper operation and maintenance
of the aligner.
Therefore, Snap-on has sufficiently alleged that the German Defendants sold,
offered to sell, or used the infringing product within the United States. Accordingly,
the German Defendants’ motion to dismiss Snap-on’s claim of direct infringement is
denied.
-9-
III.
Inducement to Infringe
Snap-on maintains that its complaint also states a claim against the German
Defendants for inducing Bosch USA to infringe its patents. The German Defendants
contend that Snap-on is judicially estopped from asserting such a claim, and in the
alternative, that it has failed to plead sufficient factual matter to state this claim.
A.
Judicial Estoppel
As a threshold matter, the German Entities maintain that Snap-on is judicially
estopped from asserting a claim of inducement to infringe because Snap-on represented
to the Court at a status hearing and in prior pleadings that it would only pursue claims
of direct infringement against the Defendants. Judicial estoppel “generally prevents a
party from prevailing in one phase of a case on an argument and then relying on a
contradictory argument to prevail in another phase.” New Hampshire v. Maine, 532 U.S.
742, 749 (2001) (internal quotations and citation omitted); see also Levinson v. United
States, 969 F.2d 260, 264 (7th Cir. 1992) (explaining that judicial estoppel “protect[s]
the courts from being manipulated by chameleonic litigants who seek to prevail, twice,
on opposite theories”)
Snap-on did not “prevail” in a prior phase of this litigation by expressly
abandoning its claim of inducement to infringe. Although Snap-on represented in open
court that it sought to hold the German Entities liable for direct infringement, Snap-on’s
- 10 -
in-court statements served to clarify that they did not intend to pursue a joint
infringement claim2 and in no way outlined their position regarding an inducement to
infringe claim. Conspicuously absent from the status hearing was any discussion of
Snap-on’s inducement theory of liability.
The German Defendants next contend that Snap-on prevailed in its motion to file
an amended complaint adding the German Defendants to the suit because it represented
to the Court that it did not seek to add any new claims. In granting Snap-on’s motion,
the Court held that Bosch USA failed to show that it would suffer any undue prejudice
by allowing the joinder of the German Defendants. The current claim for inducement
to infringe does not prejudice Bosch USA in any way, nor does it materially expand the
scope of discovery beyond what would be necessary for Snap-on to establish a claim
of direct infringement against the German Defendants. Therefore, Snap-on did not
prevail in its motion to file an amended complaint by representing to the Court that it
would not pursue a claim of inducement to infringe. To the contrary, in a subsequent
brief on this issue, Snap-on asserted that the amended complaint stated a viable claim
of inducement to infringe against the German Defendants. Therefore, Snap-on is not
2
A claim of “joint infringement” exists in a method infringement claim where one party
exercises control or direction over the infringement “such that all steps of the process can be
attributed to the controlling party.” Golden Hour Data Sys., Inc. v. emsCharts, Inc., 614 F.3d 1367,
1380 (Fed. Cir. 2010) (citing Muniauction, Inc. v. Thomson Corp., 532 F.3d 1318, 1329 (Fed. Cir.
2008)).
- 11 -
judicially estopped from asserting a claim of inducement, and we turn to the viability
of this claim as it is pleaded.
B. Merits of Snap-on’s Inducement Claim
Federal law provides that “[w]hoever actively induces infringement of a patent
shall be liable as an infringer.” 35 U.S.C. § 271(b). To survive a motion to dismiss, a
complaint must contain sufficient factual matter to plausibly suggest that defendants:
(1) specifically intended a third party to infringe the plaintiff’s patent, and (2) knew that
the third party’s acts constituted infringement. In re Bill of Lading Transmission &
Processing Sys. Patent Litig., 681 F.3d 1323, 1339 (Fed. Cir. 2012). Snap-on alleges
that Bosch Germany made the decision to introduce and to sell the infringing aligner
in the United States. Bosch Germany then commissioned Beissbarth to develop the
infringing aligner, and the German Entities worked in conjunction with Bosch USA to
devise a pricing and marketing plan for the sale of the aligner in the United States.
Additionally, Snap-on alleges that prior to Bosch USA’s introduction of the infringing
aligner to the United States, it sent Bosch USA a letter warning that the product would
infringe its patents.
These factual allegations are sufficient to state a claim that the German
Defendants induced Bosch USA to infringe Snap-on’s patents. Taking Snap-on’s
allegations as true, the German Defendants were highly involved in the development,
- 12 -
marketing, and sale of the infringing aligner. Moreover, the German Defendants
directed the infringing aligner to American consumers through Bosch USA, a subsidiary
of Bosch Germany. Furthermore, Snap-on has alleged sufficient facts to plausibly
suggest that the German Defendants were aware that their aligner infringed Snap-on’s
patents. Snap-on expressly alleges that the German Defendants knew of Snap-on’s
patents, which is supported by the fact that Snap-on apprised Bosch USA of the
potential infringement of its aligner. Knowledge can plausibly be imputed to the
German Defendants due to the close corporate ties of the Defendants. For example,
Snap-on alleged that (1) Bosch USA and Beissbarth are wholly-owned subsidiaries of
Bosch Germany, (2) the Defendants share physical assets and intellectual property, and
(3) the presidents of Beissbarth and Bosch USA hold high-level management positions
at Bosch Germany. These allegations plausibly suggest that the German Defendants
had knowledge of Snap-on’s patent and specifically intended that Bosch USA infringe
on this patent.
The German Defendants nevertheless maintain that Snap-on’s claim is deficient
because it does not expressly state the elements of an inducement claim. In fact, the
words “induce” and “inducement” are conspicuously absent from the complaint.
However, Federal Rule of Civil Procedure 8(a) does not require a plaintiff to plead a
legal theory in its complaint. See La Porte Cnty. Republican Cent. Comm. v. Bd. of
- 13 -
Comm’rs of Cnty. of La Porte, 43 F.3d 1126, 1129 (7th Cir. 1994) (stating that a
complaint “need not plead law, and it is not tied to one legal theory”); Bartholet v.
Reishauer A.G. (Zurich), 953 F.2d 1073, 1078 (7th Cir. 1992) (explaining that “a
complaint need not identify a legal theory, and specifying an incorrect theory is not
fatal”). Although the amended complaint does not explicitly assert that Snap-on is
pursuing a claim of indirect infringement, the allegations contained therein are sufficient
to put the German Defendants on notice of the allegedly unlawful conduct in which they
engaged. Such notice is all that is required under Rule 8(a). See McCauley v. City of
Chi., 671 F.3d 611, 626 (7th Cir. 2011) (“The primary purpose of notice pleading under
Rule 8 is notice.”). Accordingly, the German Defendants’ motions to dismiss Snap-on’s
claims of inducement to infringe are denied.
CONCLUSION
In light of the foregoing, the German Defendants’ motions to dismiss Snap-on’s
complaint are denied.
Charles P. Kocoras
United States District Judge
Dated: July 11, 2012
- 14 -
Disclaimer: Justia Dockets & Filings provides public litigation records from the federal appellate and district courts. These filings and docket sheets should not be considered findings of fact or liability, nor do they necessarily reflect the view of Justia.
Why Is My Information Online?