Kljajich et al v Whirlpool Corporation
Filing
215
MEMORANDUM Opinion and Order Signed by the Honorable Amy J. St. Eve on 5/9/2017:Mailed notice(kef, )
IN THE UNITED STATES DISTRICT COURT
NORTHERN DISTRICT OF ILLINOIS
EASTERN DIVISION
BETH KLJAJIC & KATHLEEN CATES,
Individually and On Behalf of All Others
Similarly Situated,
Plaintiffs,
v.
WHIRLPOOL CORPORATION,
Defendant.
)
)
)
)
)
)
)
)
)
)
)
No. 15-CV-5980
Hon. Amy J. St. Eve
MEMORANDUM OPINION AND ORDER
AMY J. ST. EVE, District Court Judge:
Plaintiffs Beth Kljajic (“Kljajic”) and Kathleen Cates’s (“Cates”) (collectively,
“Plaintiffs”) have moved to certify various classes of consumers who purchased allegedly
defective ovens manufactured by Defendant Whirlpool Corporation (“Whirlpool”). (R. 109.) In
support of their motion for class certification, Plaintiffs rely on the expert opinion of Albert de
Richemond for proof of a common defect in all ovens purchased by class members. Whirlpool
has moved to exclude de Richemond’s opinion under the Federal Rules of Evidence and Daubert
v. Merrell Dow Pharmaceuticals., Inc., 509 U.S. 579 (1993). (R. 134.) On April 17, 2017, the
Court held a Daubert hearing in which de Richemond testified. For the following reasons, the
Court grants Whirlpool’s Daubert motion and denies Plaintiffs’ class-certification motion.
LEGAL STANDARD
“[W]hen an expert’s report or testimony is critical to class certification . . . a district court
must conclusively rule on any challenge to the expert’s qualifications or submissions prior to
ruling a class certification motion.” Am. Honda Motor Co. v. Allen, 600 F.3d 813, 815–16 (7th
Cir. 2010) (per curiam); see also Mednick v. Precor, Inc., No. 14 C 3624, 2016 WL 3213400, at
*3 (N.D. Ill. June 10, 2016); In re Groupon, Inc. Sec. Litig., No. 12 C 2450, 2014 WL 2035853,
at *2 (N.D. Ill. May 16, 2014). De Richemond’s opinion regarding the existence of a common
defect is central to at least Plaintiffs’ proof of commonality and predominance. Fed. R. Civ. P.
23(a)(2), (b)(3). The Court therefore must resolve this motion before turning to Plaintiffs’
motion for class certification.1
I.
Rule 702 and Daubert
“A district court’s decision to exclude expert testimony is governed by Federal Rules of
Evidence 702 and 703, as construed by the Supreme Court in [Daubert].” Brown v. Burlington
N. Santa Fe Ry. Co., 765 F.3d 765, 771 (7th Cir. 2014). “The rubric for evaluating the
admissibility of expert evidence considers whether the expert [is] qualified, whether his
methodology [is] scientifically reliable, and whether the testimony would . . . assist[] the trier of
fact in understanding the evidence or in determining the fact in issue.” Hartman v. EBSCO
Indus., Inc., 758 F.3d 810, 817 (7th Cir. 2014); see also Higgins v. Koch Dev. Corp., 794 F.3d
697, 704 (7th Cir. 2015) (“Rule 702 and Daubert require the district court to determine whether
proposed expert testimony is both relevant and reliable.”). Although the Seventh Circuit reviews
“the district court’s application of Daubert . . . de novo,” if “the court adhered to the Daubert
framework, then its decision on admissibility is reviewed for abuse of discretion.” Estate of
Stuller v. United States, 811 F.3d 890, 895 (7th Cir. 2016).
A district court’s evaluation of expert testimony under Daubert does not “take the place
of the jury to decide ultimate issues of credibility and accuracy.” Lapsley v. Xtek, Inc., 689 F.3d
1
There are three other Daubert motions pending regarding one of Plaintiffs’ experts (a rebuttal expert) and two of
Whirlpool’s experts. Because Plaintiffs’ class certification motion fails without de Richemond’s testimony
regardless of the admissibility of Plaintiffs’ second expert’s opinion, it is unnecessary to consider the three other
experts involved in this case.
2
802, 805 (7th Cir. 2012); see also Ortiz v. City of Chicago, 656 F.3d 523, 536 (7th Cir. 2011)
(“The admissibility determination is not intended to supplant the adversarial process, and so even
‘shaky’ testimony may be admissible.”). Once it is determined that “the proposed expert
testimony meets the Daubert threshold of relevance and reliability, the accuracy of the actual
evidence is to be tested before the jury with the familiar tools of ‘vigorous cross-examination,
presentation of contrary evidence, and careful instruction on the burden of proof.’” Lapsley, 689
F.3d at 805 (quoting Daubert, 509 U.S. at 596); see also Manpower, Inc. v. Ins. Co. of Pa., 732
F.3d 796, 806 (7th Cir. 2013) (“The soundness of the factual underpinnings of the expert’s
analysis and the correctness of the expert’s conclusions based on that analysis are factual matters
to be determined by the trier of fact, or, where appropriate, on summary judgment.” (quoting
Smith v. Ford Motor Co., 215 F.3d 713, 718 (7th Cir. 2000))).
A district court’s inquiry under Daubert is a flexible one and district courts have wide
latitude in performing their gate-keeping function under the Federal Rules of Evidence. See
Kumho Tire Co. v. Carmichael, 526 U.S. 137, 141 (1999); Hartman, 758 F.3d at 818. “[T]he
key to the gate is not the ultimate correctness of the expert’s conclusions,” rather, “it is the
soundness and care with which the expert arrived at her opinion[.]” C.W. ex rel. Wood v.
Textron, Inc., 807 F.3d 827, 834 (7th Cir. 2015) (second alteration in original) (quoting Schultz v.
Akzo Nobel Paints, LLC, 721 F.3d 426, 431 (7th Cir. 2013)). The “proponent of the expert bears
the burden of demonstrating that the expert’s testimony would satisfy the Daubert standard” by a
preponderance of the evidence. Lewis v. CITGO Petroleum Corp., 561 F.3d 698, 705 (7th Cir.
2009); see also United States v. Saunders, 826 F.3d 363, 368 (7th Cir. 2016) (“[F]or expert
testimony to be admissible, the proponent of the evidence must establish that the expert’s
testimony is reliable (and relevant) by a preponderance of the evidence.”).
3
II.
Class Certification
To obtain class certification under Federal Rule of Civil Procedure 23, a plaintiff must
satisfy each requirement of Rule 23(a)—numerosity, commonality, typicality, and adequacy of
representation—and one subsection of Rule 23(b). McCaster v. Darden Rests., Inc., 845 F.3d
794, 800 (7th Cir. 2017); Harper v. Sheriff of Cook Cty., 581 F.3d 511, 513 (7th Cir. 2009).
Here, Plaintiffs seek certification under Rule 23(b)(3), which requires that “questions of law or
fact common to class members predominate over any questions affecting individual members”
and that a “class action is superior to other available methods for fairly and efficiently
adjudicating the controversy.” Fed. R. Civ. P. 23(b)(3); Bell v. PNC Bank, N.A., 800 F.3d 360,
373 (7th Cir. 2015). Plaintiffs alternatively seek certification under Rule 23(b)(2), which
requires that “the party opposing the class has acted or refused to act on grounds that apply
generally to the class, so that final injunctive relief or corresponding declaratory relief is
appropriate respecting the class as a whole.” Chi. Teachers Union, Local No. 1 v. Bd. of Educ.,
797 F.3d 426, 441 (7th Cir. 2015); Porter v. Pipefitters Ass’n Local Union 597, 208 F. Supp. 3d
894, 904 (N.D. Ill. 2016).2 Plaintiffs carry the burden of demonstrating compliance with Rule 23
by a preponderance of the evidence. Mulvania v. Sheriff of Rock Island Cty., 850 F.3d 849, 859
(7th Cir. 2017); Messner v. Northshore Univ. Health Sys., 669 F.3d 802, 811 (7th Cir. 2012).
The Court has “broad discretion to determine whether certification of a class-action
lawsuit is appropriate.” Mulvania, 850 F.3d at 859 (quoting Chavez v. Ill. State Police, 251 F.3d
612, 629 (7th Cir. 2001)). Nevertheless, class certification is only appropriate if the Court “‘is
satisfied, after a rigorous analysis, that the prerequisites’ for class certification have been met.”
Bell, 800 F.3d at 373 (quoting CE Design, Ltd. v. King Architectural Metals, Inc., 637 F.3d 723
2
Plaintiffs also seek, in the alternative, class certification as to particular issues. Under Rule 23(c)(4), “[w]hen
appropriate, an action may be brought or maintained as a class action with respect to particular issues.” Fed. R. Civ.
P. 23(c)(4).
4
(7th Cir. 2011)); Schneider v. Ecolab, Inc., No. 14 C 01044, 2016 WL 7840218, at *3 (N.D. Ill.
Sept. 2, 2016). In conducting its Rule 23 analysis, courts should “not turn the class certification
proceedings into a dress rehearsal for the trial on the merits.” Messner, 669 F.3d at 811. Where
an issue affects class certification, however, “a court may not simply assume the truth of the
matters as asserted by the plaintiff.” Id. “Rule 23 does not set forth a mere pleading standard.”
Wal-Mart Stores, Inc. v. Dukes, 564 U.S. 338, 350 (2011). Instead, “[i]f there are material
factual disputes that bear on the requirements for class certification, the court must ‘receive
evidence if only by affidavit and resolve the disputes before deciding whether to certify the
class.’” Bell, 800 F.3d at 377 (emphasis in original) (quoting Szabo v. Bridgeport Machs., Inc.,
249 F.3d 672, 676 (7th Cir. 2001)). Thus, the class certification inquiry “[f]requently . . . will
entail some overlap with the merits of the plaintiff’s underlying claim.” Wal-Mart, 564 U.S. at
350–51; see also Comcast Corp. v. Behrend, 133 S. Ct. 1426, 1432 (2013); Schneider, 2016 WL
7840218, at *3.
BACKGROUND
I.
Plaintiffs’ Motion for Class Certification on the Basis of a Common Defect
Plaintiffs seek to certify various classes based on an alleged defect in Whirlpool’s Vision
II Platform Wall Ovens (“Ovens”). Specifically, Plaintiffs explain that “the core operative facts
underlying [their] claims are that the Ovens suffer from the same inherent Defect that cause[s]
the Ovens to become unusable when the self-cleaning function is run,” (R. 167, Pls.’ Reply
Supp. Mot. Class Cert., 3), and that the Ovens “are prone to overheat and lock up when the selfcleaning cycle is used, leaving the[] Ovens locked and unusable,” (R. 114, Pls.’ Mem. Supp.
Mot. Class Cert., 1). According to Plaintiffs, the Vision II Platform Ovens “us[e] the same
chassis” as well as the “same self-cleaning feature,” which functions by heating the oven to a
5
very high temperature to break down organic components into ash. (Id. at 2.) Due to the high
oven temperature during self-cleaning, which purportedly reaches approximately 855 degrees
Fahrenheit, Plaintiffs contend that “appropriate venting of the super-heated air is critical to
maintain safe operation of the Ovens.” (Id. at 3.)
In their Second Amended Class Action Complaint, Plaintiffs seek certification under
Federal Rule of Civil Procedure 23 on behalf of the following class: “Any and all individuals
who purchased, at retail price and for personal use, a Whirlpool Oven with a self-cleaning
mechanism.” (R. 49, Second Am. Class Action Compl., ¶ 48.) They bring claims for breach of
warranty, consumer fraud, and unjust enrichment. (See R. 114 at 24–27.)
In their brief supporting their class certification motion, Plaintiffs are more precise about
the classes they seek to represent:
Rule 23(b)(3) Classes
All individuals residing in the States identified in Exhibit 1 who purchased a Whirlpool
Oven with a self-cleaning mechanism (the “Multi-State Class”).3
All individuals residing in the States identified in Exhibit 1 who purchased a Whirlpool
Oven sold by IKEA with a self-cleaning mechanism (the “IKEA Multi-States Class”).
(R. 114 at 9.) For these classes, Kljajic pursues claims for breach of express warranty and
violation of the Magnuson-Moss Warranty Act (“MMWA”). (Id.) Plaintiffs also seek to certify
classes of:
3
All individuals who purchased a Whirlpool Oven with a self-cleaning mechanism in the
state of Illinois (the “Illinois Class”).
All individuals who purchased a Whirlpool Oven sold by IKEA with a self-cleaning
mechanism in the state of Illinois (the “IKEA Illinois Class”).
Exhibit 1 includes a list of fifteen states and the District of Columbia.
6
(Id.) For these classes, Kljajic pursues claims for violation of the Illinois Consumer Fraud Act
(“ICFA”), violation of the MMWA, breach of implied warranty, breach of express warranty, and
unjust enrichment. (Id.) In addition to the above classes, Plaintiffs seek to certify a class of:
All individuals who purchased a Whirlpool Oven with a self-cleaning mechanism in the
state of South Carolina (the “South Carolina Class”).
(Id.) For this class, Plaintiffs pursue a claim of unjust enrichment. (Id.)
Alternative Rule 23(b)(2) Classes
Plaintiffs also seek, in the alternative, to certify the following injunctive classes:
All individuals residing in the States identified in Exhibit 1 who purchased a Whirlpool
Oven with a self-cleaning mechanism (the “Injunctive Multi-State Class”).
All individuals residing in the States identified in Exhibit 1 who purchased a Whirlpool
Oven sold by IKEA with a self-cleaning mechanism (the “Injunctive Multi-State IKEA
Class”).
(Id. at 9–10.) For these classes, Plaintiffs pursue breach of express warranty and MMWA
claims. (Id. at 10.)
Issues Classes Under Rule 23(c)(4)
In addition, Plaintiffs seek “to certify all issues subject to common proof in accordance
with Rule 23(c)(4). (Id.) The common issues Plaintiffs identify are “whether the Ovens contain
a defect in that the Ovens are prone to fail when the self-cleaning cycle is used,” “whether the
defect existed at the time it left Defendant’s control,” and “whether Defendant concealed the
defect from Plaintiffs and the proposed class.” (Id. at 34; see also id. at 22–23.)
*
*
*
Plaintiffs identify “[c]ommon evidence of the existence of a Defect” as a common issue
for each class action claim. (See id. at 24–27.) Plaintiffs put forth the expert opinion of Albert
de Richemond to establish the common defect in the Ovens. They cite, for example, de
7
Richemond’s opinions in describing “the defect at issue” in their opening class certification brief,
(see id. at 3), as well as in their reply class certification brief, (see, e.g., R. 167 at 1). In short,
Plaintiffs point to de Richemond’s opinions to tie the class action claims together by establishing
an inherent defect in every Oven rather than, for example, a defect confined to some subset of
Ovens. (See, e.g., id. (discussing a defect “common to the Ovens” and citing de Richemond’s
reports).)
Plaintiffs have continually moved the goalpost with respect to identifying a common
defect. The operative complaint in this case lists a wide variety of defect candidates.
Specifically, Plaintiffs define the term “Defect(s)” in the complaint as “including but not limited
to, one or more of the following”:
(a) the Ovens lack a proper thermostat that regulates the selfcleaning temperature during self-cleaning; (b) the Whirlpool
Ovens lack proper insulation to prevent the excessive heat from
damaging component parts during the self-cleaning process; (c) the
thermoregulator does not regulate the temperature of the Ovens
during the self-cleaning cycle; (d) the Ovens and their component
parts cannot withstand the heat generated by the self-cleaning
cycle; (e) the Ovens contain insufficient fan cooling near
electronics; (f) the Ovens are built with a fuse that is insufficiently
thermal tolerant; and/or (g) the Oven’s self-cleaning cycle creates
temperatures that exceed the heat necessary for an Oven to be selfcleaned.
(R. 49 at ¶ 3.)
In their opening brief supporting their motion for class certification, Plaintiffs are
somewhat coy in specifically identifying the defect in the Ovens. At times, they appear to
suggest that the defect is a confluence of several design issues. (R. 114 at 3 (“Whirlpool made
Ovens with several design issues that combine to cause the Ovens to fail during self cleaning.”
(quoting R. 115-5, de Richemond Rebuttal Report, 1)).) At other points, Plaintiffs suggest that
the defect was related to air flow. (See id. at 4 (“Perhaps the biggest fault, which was not
8
addressed by Whirlpool, was that air pulled into the oven-surrounding enclosure was pre-heated
by the air moving upward through the door.” (quoting R. 115-5 at 2)).) At other times still,
Plaintiffs define the defect broadly as the Ovens being “prone to overheat and lock up when the
self-cleaning cycle is used.” (Id. at 1.) Indeed, it is this final description of the defect that
Plaintiffs use to create the defined term “Defect” in their opening class certification brief. (Id.)
In their reply brief, however, Plaintiffs alter their description of the defect, offering a
more precise picture. Tellingly, they change the defined term “Defect”—which they had already
changed during the time between the filing of the second amended complaint and the filing of the
motion for class certification—to “poor airflow through the oven-surrounding enclosure.” (R.
167 at 1 (quoting R. 115-5 at 1); see also id. at 4–5 (“[A]ll Ovens share the common, inherent
characteristic of having insufficient airflow to accommodate the heat generated by the selfcleaning cycle that leaves the Ovens prone to shut down and become unusable.”).) Similarly,
Plaintiffs contend that “[t]he central, common issue in this litigation is that Whirlpool’s Ovens
fail when the self-cleaning function is run because the overarching design results in ‘ineffective
heat flow regulation and heat removal.’” (Id. at 1 (quoting R. 115-4, de Richemond Report, 11).)
In short, Plaintiffs’ reply class certification brief embraces the notion that there is a particular,
identifiable design defect—an airflow problem—“that cause[s] the Ovens to become unusable
when the self-cleaning function is run.” (Id. at 3.) In other words, according to the reply brief,
failure during self-cleaning is not, itself, the defect. Rather, the defect is a single, identifiable
airflow problem common to all Ovens that causes failure during self-cleaning.
By the de Richemond Daubert hearing, however, Plaintiffs appeared to have once again
changed their theory. They represented that the defect was “a total shutdown of the oven during
the running of the self-cleaning feature”—though it was “affected by several factors or
9
elements.” (R. 212, de Richemond Daubert Hr’g Tr., 5.) This is a retreat from the far more
precise formulation of the defect in Plaintiffs’ reply brief for class certification. Similarly, de
Richemond testified on the day of the hearing that the defect was “[t]hat the oven overheats and
shuts down during the self-cleaning cycle.” (Id. at 75.) He also testified that there were multiple
possible causes of this defect. (Id. at 77.)
II.
The Ovens
A.
The Vision II Platform and Design Differences
Plaintiffs’ claims relate to all ovens on Whirlpool’s Vision II platform. (R. 114 at 2.)
Whirlpool used the Vision II platform in manufacturing ovens for three different brands—
Whirlpool, KitchenAid, and IKEA—in three configurations—single, double, and combination
microwave oven—in three different widths—24-, 27-, and 30-inches. (R. 136-2, Ohlsson Decl.,
¶ 4.) Whirlpool began selling the Ovens in 1998 and continues to sell them to this day, although
it ceased production of most IKEA Vision II ovens in 2014 and most KitchenAid and Whirlpool
ovens in 2007 and 2012, respectively. (Id. at ¶¶ 4, 24.)4 In total, Whirlpool has sold nearly
2,000,000 Ovens in the United States and has manufactured 322 different base models of Vision
II wall ovens. (Id. at ¶¶ 21, 59.) Some of the Ovens have different components. (See id. at
¶¶ 23–24.) IKEA ovens, for example, were only manufactured in 30-inch widths, have since
2009 used a control thermal fuse5 with an 84°C set point, while Whirlpool brand ovens used a
control thermal fuse of either 93°C or 110°C since 2011. (Id.) The temperature limit of the
4
De Richemond indicates that Whirlpool ceased production of all Vision II ovens by 2014. (R. 115-4 at 4.) The
Court need not resolve precisely when Whirlpool ceased production of all Vision II ovens for the purposes of this
opinion.
5
A thermal fuse is “a safety fuse found in some ovens typically mounted in a wire harness in the top chassis area
near the oven’s electronic control board, which is set to open (trip) at 84°C, 93°C, or 110°C, depending on brand and
oven configuration. If the thermal-fuse trips, power to the entire oven is cut, including the heating element, so that it
will cool down.” (R. 136-2 at ¶ 4.)
10
electronic control system in an IKEA oven is 20°C less than in Whirlpool and KitchenAid ovens,
and IKEA ovens have a control board split from the user interface while the other brand ovens
do not. (Id.) Whirlpool has also used a variety of cooling fans in two different sizes and six
different RPMs in manufacturing the Ovens. (Id.) Additionally, Whirlpool has used different
TOD6 set points—130°C and 120°C. (Id.) Based on these and other differences, Whirlpool
contends that the Ovens have at least 63 materially different designs. (R. 130, Def.’s Opp’n Mot.
Class Cert., 4–5.) Plaintiffs do not contest that the Ovens embody different design features.
B.
Plaintiffs’ Ovens
Named Plaintiffs Kljajic and Cates owned different ovens and had different experiences
with them with respect to self-cleaning. Kljajic bought an IKEA Datid oven in August 2013, (R.
117-24, IKEA Invoice), which malfunctioned during a self-clean cycle she ran two days after
moving into her condominium, (R. 117-2, Kljajic Dep., 76). Kljajic received a replacement
oven—also a Datid oven. (Id. at 179; R. 115-7, Taylor Report, fig.13.) She did not experience
any problems with her new oven, but she never ran the self-cleaning function on it. (R. 117-2 at
10, 182.)
Cates bought a KitchenAid double oven in 2004. (R. 117-3, Cates Dep., 10.) Cates had
her oven for approximately ten years before it malfunctioned. (Id. at 117.) During this ten-year
period, she ran up to three self-cleaning cycles without incident (Cates testified that she ran two
or three self-cleans). (Id. at 116–17.) After her oven malfunctioned, it was repaired. (Id. at 10.)
Since the repair, she has not run the self-cleaning cycle and reported that her oven had a difficult
6
A TOD is “a safety fuse found in all ovens typically mounted on the back of the oven’s outer shell near the top of
the cavity. (R. 136-2 at ¶ 4.) The TOD is set to open (trip) at either 120°C or 130°C, depending on the oven’s
configuration.” (Id.) If the temperature of the TOD exceeds its set point, the TOD “will trip and cut power to the
oven’s heating element so that it will cool down.” (Id.)
11
time maintaining a uniform temperature while cooking, although this issue has improved. (Id. at
145, 251–55.)
C.
UL 858 Testing
Whirlpool tested its Ovens using Underwriters Laboratory (“UL”) 858 protocols. (R.
136-2 at ¶ 6.) UL 858 is a safety standard “that requires manufacturers to meet certain
temperature-management standards to ensure that ovens do not overheat to the point of posing a
danger to people or property.” (R. 130 at 8 (citing R. 136-2 at ¶¶ 7–12).) UL 858 calls for,
among other things, a “normal temperature” test in which an oven’s components are monitored
while running a self-clean cycle. (R. 136-2 at ¶ 7.) During testing, Whirlpool “records the peak
temperatures reached by various components . . . and compares the[m] to the UL-approved
temperature ratings.” (Id.) UL 858 testing shows the temperature margins of components—the
difference between the maximum temperature reached during a self-clean cycle and the set point
(or maximum allowable temperature) of that component. (Id. at ¶ 12.) The temperature margin
of the thermal fuse and TOD is the difference between their maximum temperature during a selfclean cycle and the temperature at which they “will trip and cut power to the heating elements
long before other oven surfaces reach unsafe temperatures or components are damaged.” (See
id.)
“Before Whirlpool makes changes to ovens with the UL mark[,] . . . it must consult with
UL representatives about the proposed changes and whether additional testing is required for the
oven model to obtain or maintain UL listing status.” (Id. at ¶ 10.) If a change will potentially
impact component or surface temperatures, the ovens undergo additional testing. (Id.)
Whirlpool has successfully conducted UL 858 tests on Vision II platform ovens. The
tests show that the Ovens completed self-cleaning without tripping thermal fuses and/or TODs.
12
(Id. at ¶¶ 12–18.) In 2002, for example, Whirlpool conducted “normal temperature” testing of a
KitchenAid 30-inch double oven, and the temperature margins were 36°C for the TOD and 46°C
for the thermal fuse. (Id. at ¶ 14.) In 2003, during testing of a different KitchenAid 30-inch
double, the TOD and thermal fuse margins were 24°C and 42°C respectively. (Id. at ¶ 15.)
Whirlpool reports similar results from tests in subsequent years of different ovens. (Id. at ¶¶ 16–
17.) Testing of IKEA ovens in 2008, for example, showed TOD margins of 17°C and 18°C. (Id.
at ¶ 17.) Testing on other IKEA models in 2008 showed TOD margins above 20°C. (Id.)
Testing on another IKEA oven in 2009 using an in-wall installation showed a TOD margin of
23°C and a thermal-fuse margin of 21°C. (Id.) Testing on the same oven using an under-counter
installation yielded a TOD margin of 21°C and a thermal-fuse margin of 19°C. (Id.) When the
same oven was tested on a self-clean cycle with a cooktop running, the TOD margin was 17°C
and the thermal-fuse margin was 14°C. (Id.) All of these 2009 tests were successful. (Id.)
Whirlpool also has other UL 858 data showing successful self-clean cycles for KitchenAid and
Whirlpool ovens. (Id. at Ex. 7)
D.
Technical Service Pointers and Improvement Efforts
Over the years, Whirlpool issued a number of Technical Service Pointers (“TSPs”) that
deal with repair recommendations related to self-cleaning. (See R. 167 at 1.) TSPs “provide
guidance to servicers to troubleshoot specific issues that can cause a thermal-fuse or TOD to trip
and to increase temperature margins to resolve the issue going forward.” (R. 136-2 at ¶ 60.) The
TSPs Plaintiffs identify indicate the following:
In January 2000, Whirlpool issued a TSP for Whirlpool and KitchenAid built-in
ovens to install a third piece of glass to assist with air flow within the door because
high temperatures during self-clean were causing “the assembly to deform.” (R. 1695 at 1.) Whirlpool has submitted testing information that showed the extra glass
reduced TOD and oven latch temperatures, particularly when coupled with a larger
fan. (R. 136-2 at ¶ 62.)
13
In June 2000, Whirlpool issued a TSP for all Whirlpool and KitchenAid 24-, 27-, and
30-inch built-in single and double ovens. (R. 169-5 at 2, 4.) The TSP responded to a
complaint of TOD failure due to a sealing problem on the door. (Id.) Later, in
October 2000, Whirlpool updated this TSP for a subset of Whirlpool and KitchenAid
ovens. (Id. at 6.)
In April 2012, Whirlpool issued a TSP for Whirlpool brand ovens, all -6 through -12
models, to reroute the thermal fuse away from the oven’s exhaust vent. (R. 169-5 at
8.) Whirlpool explains that this TSP “addressed a manufacturing issue where the
control panel thermal-fuse could be misrouted by some assembly operator(s) over the
oven exhaust vent, contrary to Whirlpool’s design.” (R. 136-2 at ¶ 66.)
In December 2005, Whirlpool issued a TSP for all KitchenAid and Whirlpool brand
single, double, and combination built-in ovens addressing an issue where the TOD
tripped because oven heat escaped from the oven door or the exhaust air flow was
interrupted. (R. 169-5 at 10.) The TSP listed a series of checks and corrections repair
technicians could make: check if the door opened beyond a 90 degree angle, check
for damage to the door gasket, check for an obstruction in the vent or whether the
vent was incorrectly assembled, check the blower fan for a misalignment, check for
the correct TOD part number, check for a power interruption during use, and check
that the oven is not installed in a corner. (Id.) If all of these checks are OK, the TSP
says to replace the blower assembly. (Id.) Whirlpool reissued this TSP in March
2007 with minor alterations (namely, the TSP no longer recommended ensuring that
the oven was not installed in a corner). (Id. at 11.)
In December 2008, Whirlpool issued a TSP for certain models of Whirlpool and
KitchenAid built-in single and double ovens manufactured before December 2008
and KitchenAid 24-inch built-in ovens. (Id. at 12–13.) The TSP recommended to
perform the following checks: checking to see that the door closes completely so air
from the oven does not escape, checking to see that the door does not open beyond a
90 degree angle, checking for damage to the door gasket, checking for obstructions to
oven venting, and checking for a power-interruption during self-cleaning. (Id. at 13.)
The TSP also indicated that the rear oven thermostat should be replaced with the
original part number found in the parts list and the blower should be replaced with a
new, more powerful blower. (Id.) In January 2011, Whirlpool reissued this TSP with
a note that Whirlpool would cover parts and labor for repairs made pursuant to the
TSP. (Id. at 17; R. 136-2 at ¶ 76.) In March 2011, Whirlpool once again reissued this
TSP. (R. 169-5 at 21–22.)
In September 2012, Whirlpool issued a TSP for certain models of KitchenAid wall
ovens to address a problem where the “Door Latch Assembly deformed during Self
Clean cycle.” (Id. at 22.) The TSP recommended replacing the glass door liner and
the motorized latch assembly. (Id.)
14
III.
In April 2013, Whirlpool released a TSP for certain IKEA ovens because “[i]mproper
installation blocks air vent and blows the oven thermal fuse.” (Id. at 26.) In May
2013, IKEA communicated to Whirlpool the results of testing on IKEA ovens that
found that “Datid” IKEA models could overheat but “Nutid” IKEA models did not.
(R. 136-2 at ¶ 81.)
In June 2013, Whirlpool conducted testing indicating that IKEA ovens run hotter in
IKEA-supplied cabinets, which are made of pressboard instead of plywood. (Id. at
¶ 82.) In response, Whirlpool made several changes to increase the temperature
margin. (Id. at ¶ 83.) They also developed a service kit that “allowed servicers to
make similar changes for customers who experienced the issue in the field.” (Id. at
¶ 54.) In May 2014, IKEA issued a TSP for certain IKEA ovens built before October
2012 to recommend the installation of this service kit to prevent the “[t]hermofuse
sensing heat build-up behind control panel area.” (R. 169-5 at 29.)
Albert de Richemond’s Opinions
Plaintiffs’ expert, Albert de Richemond, is a professional engineer. (R. 175-4, de
Richemond Resume, 1.) He holds a Bachelor of Science in Engineering Mechanics from The
Pennsylvania State University and a Master of Science in Engineering Science and Mechanics
from Virginia Tech University. (Id.) Since 2012, he has worked for Consulting Engineers and
Scientists Inc. as a Consulting Engineer. (Id.) His responsibilities include “the evaluation of
commercial, industrial and agricultural equipment design, maintenance, guarding, and safety;
piping, plumbing, valves, pressure vessels; pneumatic and hydraulic systems; sprinkler systems;
heating, ventilating, and air conditioning (HVAC); dust collection and vacuum equipment;
power tools; consumer products including chairs, bicycles, toys, and exercise equipment;
industrial and agricultural machinery; machinery/component failure analysis; welding
evaluations; material reduction handling, and conveying equipment; automatic doors; and
exercise equipment.” (Id.)
In preparing his report, de Richemond considered the Plaintiffs’ Second Amended Class
Action Complaint; Whirlpool’s response to Plaintiffs’ first sent of interrogatories; the deposition
of Valerio Hammes, “the system architect for Whirlpool”; technical bulletins regarding how to
15
fix overheating problems in the Ovens; the deposition of Scott Ohlsson (“Ohlsson”), a “Lead
Engineer” at Whirlpool; and the deposition of Jennifer Karber, the director of quality for North
America Cooking at Whirlpool. (R. 115-4 at 1–8.) De Richemond also examined seven returned
ovens, Kljajic’s oven, and Cates’s oven. (Id. at 8.) Customers had returned each of the seven
ovens after experiencing “problems in use.” (Id.) De Richemond observed that the outer glass
on the door of all ovens but one broke, all had “chassis damage to various extents,” “most of the
units had plastic pockets for the electrics layout” and most of these pouches “were melted and
shrunken,” and “[s]ome [units] had holes in the enclosure that showed insulation stained by oven
gases or stains above the holes.” (Id.) De Richemond also indicates that “[a]ll but one of the
thermal fuses were intact, and all the TODs were intact.” (Id.) He does not know if the TODs
and thermal fuses “were replaced in the field or not.” (Id.) With respect to airflow, de
Richemond notes the following:
With the opening of the airflow channel, it was apparent that air
flowed up through the oven’s door and was pulled horizontally into
the upper chamber. Then, the air was blown by the fan down the
rear chamber and into the lower chamber. From the lower
chamber, the air was exhausted out of the bottom of the oven. A
plate separated the airflow into the door from the airflow from the
lower chamber. A series of holes in the rear outer panel allowed
air from the in-wall space to be pulled into the fan. Part of the
outflow from the fan was ducted over the oven cavity exhaust port
and out of the front of the oven over the door.
(Id. at 9.)
For Cates’s oven, “[t]he airflow channel was examined and instrumented with
thermocouples at various points, including the oven cavity, the thermal fuse and the TOD.” (Id.)
De Richemond set the oven to a self-clean cycle, which failed after approximately 2.5 hours.
(Id.) Both the thermal fuse and the TOD had opened. (Id.) De Richemond then replaced the
TOD, the thermal fuse, the door gasket, door hinges, and the fan. (Id.) He ran another self16
cleaning cycle, which failed twenty minutes faster than the previous cycle. (Id.) Once again, the
thermal fuse and TOD had opened. (Id.)
De Richemond also examined and instrumented Kljajic’s oven. (Id.) He ran a self-clean
cycle on the oven twice, which resulted in failure and the opening of both the TOD and the
thermal fuse. (Id.) Between the first and second tests, de Richemond replaced the thermal fuse,
TOD, door gasket, and the door hinges. (Id.)
De Richemond opines in his expert report—at least at times—that the Ovens are
“defective because they overheat[] and bec[o]me unusable during the cleaning cycle.” (Id. at
13.) While de Richemond notes that Whirlpool attempted to resolve the problem with various
changes, including using a higher speed fan, replacing the door gasket, and adding thermal
shielding for electronics, he believes that no repairs “successfully fixed the overheating
problem.” (Id. at 12.) The reason for this, according to de Richemond, is that Whirlpool failed
to “recognize[] that its in-wall oven incorporated a complex defective design resulting from its
inability to regulate and control its heat flow.” (Id.; see also R. 115-5 at 2 (“Perhaps the biggest
fault, which was not addressed by Whirlpool, was that air pulled into the oven-surrounding
enclosure was pre-heated by the air moving upward through the door.”).) De Richemond
explains that “[a]irflow is a factor in removing heat.” (R. 115-4 at 10.) Also, de Richemond
notes that in Whirlpool ovens, “the fan would draw air into the enclosure from above the oven
door and from the room. In this arrangement, the room air is heated by the door air and thus is at
a higher than normal temperature when it enters the airflow intake.” (Id.) De Richemond
contrasts this with other brand ovens, like General Electric, where “airflow through the door is
natural and routed away from the top air intake, allowing mostly room temperature air to enter
the intake.” (Id.)
17
In his rebuttal report, de Richemond broadly reaffirms his opinions. (R. 115-5.) De
Richemond notes that “[v]arious design problems [that] contributed to and/or caused” selfcleaning cycle failures, which Whirlpool “addressed piecemeal during the approximately 10 year
marketing life of the product.” (Id. at 3.) Those design problems included, according to de
Richemond, “Electronics (e.g., overheating, placement),” the “thermal fuse (e.g., location,
opening temperature, what it controlled),” the TOD “(e.g., opening temperature, what it
controlled),” the “[f]an (Blower) (e.g., size, fan speed, thermal cut out),” as well as the door
gasket, the door hinges, and insulation. (Id. at 3–4.) De Richemond also explains that the design
problems included the “[o]ven wall cavity (e.g., insufficient space, poor airflow, poor heat
conduction)” and “[a]ir flow (e.g., insufficient to prevent thermal cut out, entrainment of hot air
from door openings, flow restrictions).” (Id. at 4.)
De Richemond reiterates in his rebuttal report that airflow issues presented “[p]erhaps the
biggest fault” with the Ovens that Whirlpool never addressed. (Id. at 2.) He explains:
[A]ir pulled into the oven-surrounding enclosure was pre-heated by
the air moving upward through the door. The door has two
perpendicular sets of holes in its top that both dump hot air into the
oven-surrounding enclosure. While there is a baffle intended to
entrain room temperature air, the openings in the top of the door
allow heated air from the door to be entrained along with room air
into the oven-surrounding enclosure. The openings in the top rear
of the door allowed directed air preheated by the door directly into
the oven-surrounding enclosure. Other brand ovens (e.g., General
Electric, Bosch) have larger openings and or openings that allow
only room temperature air into the oven-surrounding enclosure. In
Whirlpool ovens, because of their hole configuration, air entering
the oven-surrounding enclosure during self cleaning was hotter
than expected and caused opening of the thermal fuse and/or the
TOD.
(Id.)
18
Whirlpool took de Richemond’s deposition on November 3, 2016. (R. 136-5.) He
testified that he did not know what caused Cates’s and Kljajic’s ovens to fail during selfcleaning. (R. 136-5, de Richemond Dep., 219–20.) Additionally, he testified that he did not
know whether the cause of the two ovens’ failure was the same. (Id. at 220.)
On April 17, 2017, the Court held a Daubert hearing. During the hearing, at least at
certain points, de Richemond reiterated that he did not know what caused the ovens to fail during
self-cleaning. (R. 212 at 75 (explaining that “for whatever reason, the oven shuts down”); Id. at
104–05 (explaining that he does not know what caused the named plaintiffs’ ovens to fail).) At
other times, he testified that he has an opinion regarding what causes the ovens to fail. In
response to questioning from the Court, de Richemond said that the failure stems from a “very
hot” self-cleaning cycle that “puts more heat into the system that has to be removed,” from preheated air being pulled into the oven, and from “[t]he size of their openings [(presumably de
Richemond was referring to openings in the door)].” (Id. at 77.) He admitted, however, that he
did not test any of his theories of causation. (Id. at 78–79.) At other times during the Daubert
hearing, de Richemond posited more possible causes of overheating, such as dust, spider webs,
and grease clogging air intakes, (id. at 82), or fan speed, (id. at 115).
De Richemond further testified that he believes all Ovens will fail during self-cleaning
because “the Vision II is a common platform for all of these ovens, and whatever the particular
cause of the defect is, it’s in those ovens.” (Id. at 81–82.) He testified, however, that he could
not explain what was the same about the Ovens with any more specificity than that they share the
Vision II platform. (Id. at 101–02 (Q: “What is the Vision II platform, sir?” A: “It’s the basic
design for all of these ovens.” Q: “Can you be any more specific about what makes [the Ovens]
19
all the same, in your opinion?” A: “No, I can’t.”).) With respect to the UL 858 testing, de
Richemond made clear that he did not believe it was relevant. (Id. at 105.)
ANALYSIS
I.
De Richemond’s Opinions Are Inadmissible Under Rule 702 and Daubert
Whirlpool does not dispute that de Richemond is qualified to provide expert testimony
regarding the Ovens. (R. 134-1, Def.’s Mem. Supp. de Richemond Daubert, i.)7 Instead,
Whirlpool contends that (1) de Richemond’s opinions do not provide proof of a common defect
and therefore are not helpful to the Court in resolving Plaintiffs’ class certification motion, and
(2) de Richemond’s opinions are unreliable.
A.
De Richemond’s Opinions Are Unhelpful
Rule 702 requires that expert testimony be helpful to “understanding the evidence
or . . . determining [a] fact in issue.” Hartman, 758 F.3d at 817; see also Stuhlmacher v. Home
Depot U.S.A., Inc., 774 F.3d 405, 409 (7th Cir. 2014) (“An expert’s testimony qualifies as
relevant under Rule 702 so long as it assists the jury in determining any fact at issue in the
case.”). This requirement “goes primarily to relevance.” Daubert, 509 U.S. at 591. Put
differently, “the suggested testimony must ‘fit’ the issue to which the expert is testifying.”
Chapman v. Maytag Corp., 297 F.3d 682, 687 (7th Cir. 2002) (quotation marks omitted);
Mcfarland v. Tricom Indus., Inc., No. 13 C 4576, 2015 WL 671802, at *1 (N.D. Ill. Feb. 17,
2015).
In their briefs supporting their motion for class certification, Plaintiffs use de
Richemond’s testimony as the glue that holds all of the class claims together. Specifically,
7
During the Daubert hearing, Whirlpool indicated that it would not stipulate that de Richemond was a product
design expert, but would stipulate that he is an expert mechanical engineer. (R. 212 at 135–36.) Whirlpool’s
Daubert briefs, however, do not focus on de Richemond’s qualifications as a ground for excluding his testimony.
Accordingly, the Court considers only Whirlpool’s arguments regarding the helpfulness of de Richemond’s opinions
and the reliability of his inquiry.
20
Plaintiffs offer his opinions to establish that all of the Ovens—which comprise about 2,000,000
units using the Vision II platform that embody various differences in design and configuration,
(see R. 136-2 at ¶¶ 24, 97)—share the same defect. As discussed above, Plaintiffs are cagey in
their class certification briefs about defining the common defect. By their reply brief, however,
Plaintiffs clarify their argument by defining the term “Defect” to mean “poor airflow through the
oven-surrounding enclosure” and by contending that “the core operative facts underlying
Plaintiffs’ claim are that the Ovens suffer from the same inherent Defect that cause[s] the Ovens
to become unusable when the self-cleaning function is run.” (R. 167 at 1, 3 (emphasis added).)
Thus, according to Plaintiffs, Ovens shutting down during self-cleaning is the result of a defect
in all Ovens related to airflow. Complicating matters, however, Plaintiffs appear to have
retreated at the Daubert hearing from this more precise framing of the defect. At the hearing,
Plaintiffs recast the defect as the “ovens shut[ting] down and becom[ing] unusable . . . when the
self-cleaning function is run.” (R. 212 at 4.) Plaintiffs’ ever-changing theories regarding the
defect in this case have made it difficult to evaluate the parties’ arguments. Nevertheless,
because Plaintiffs were crystal clear in their reply brief that there is a design defect that causes
the ovens to fail during self-cleaning, (R. 167 at 3), the Court will hold them to that theory.8 Cf.
Quality Oil, Inc. v. Kelley Partners, 657 F.3d 609, 614 (7th Cir. 2011) (noting that new theories
presented at oral argument are waived); Pike v. Premier Transp. & Warehousing, Inc., No. 13
CV 8835, 2016 WL 6599940, at *2 n.2 (N.D. Ill. Nov. 8, 2016). Thus, for de Richemond’s
opinions to be helpful, they must address some common aspect of the Ovens’ design that causes
overheating and failure during self-cleaning.
8
The Court notes that even if it accepts the broad framing of the common defect as simply that the ovens fail during
self-cleaning, de Richemond’s opinions are still unhelpful because, as detailed below, he does not tie some design
component common to all Ovens to their failure. Furthermore, de Richemond’s methodology was unreliable, as
explained below.
21
With respect to Whirlpool’s argument that de Richemond’s opinions are unhelpful
because they do not provide proof of a common defect, (see R. 134-1 at 5), the Court notes that it
is difficult to identify from de Richemond’s reports precisely what he believes the common
defect to be that causes failure during self-cleaning. At certain times, de Richemond highlights
air flow as the key, overarching problem—specifically preheated air is drawn into the ovensurrounding enclosure. He explains, for example, that “the major problem that Whirlpool
overlooked was poor airflow through the oven-surrounding enclosure.” (R. 115-5 at 1.) He also
explains that “[p]erhaps the biggest fault, which was not addressed by Whirlpool, was that air
pulled into the oven-surrounding enclosure was pre-heated by the air moving upward through the
door.” (Id. at 2; see also R. 115-4 at 12 (explaining that the Ovens “incorporated a complex
defective design resulting from [their] inability to regulate and control [their] heat flow”).) De
Richemond contrasts this allegedly defective airflow with airflow in ovens from other brands,
like General Electric, where “airflow through the door is natural and routed away from the top
air intake, allowing mostly room temperature air to enter the intake.” (R. 115-4 at 10.) Plaintiffs
echo de Richemond at times in their briefs by characterizing him as having isolated airflow as
the principal common defect. (See, e.g., R. 175, Pls.’ Opp. Mot. Exclude de Richemond, 6 (“The
overarching design defect is the Ovens’ ineffective heat flow regulation and heat removal.”
(internal quotation marks omitted); id. at 4 (noting preheated air entering the oven-surrounding
enclosure as the key problem)).)
Despite focusing at times on airflow, Plaintiffs and de Richemond sometimes merely
point to an undifferentiated mass of potential problems that they contend contribute to oven
failure. (See, e.g., id. at 6 (“Whirlpool made ovens that had several design issues that combined
to cause the ovens to fail during self-cleaning. These included design issues involving the
22
thermal fuse, the [TOD], air circulating fan, oven insulation, and poor airflow.” (internal
quotation marks omitted)).) De Richemond, for example, listed in his reports and testimony
other design factors that contribute to self-cleaning failure, like insulation, the fan, or dust
collection. (See, e.g., R. 115-5 at 3–4; R. 115-4 at 10–11; R. 212 at 82.)
De Richemond’s unclear and fluctuating opinions—his assertion of a common defect that
at times is targeted to a specific aspect of oven design and at times is a kitchen-sink approach—
are not helpful in light of how Plaintiffs have framed their class certification argument: that there
is an inherent design defect, common to all ovens, that causes overheating and failure during
self-cleaning. Even assuming de Richemond specifically identifies a design feature that causes
failure during self-cleaning—which he does not, as he at times identifies supposedly problematic
design features that have changed over time (like oven fans) as well as problems that will vary
from oven user to oven user (e.g., dust)—de Richemond gives no opinion about whether that
defective design feature is indeed common to all Ovens. (See R. 212 at 78 (Q: “Have you tested
any of these issues to nail them down as the cause of the overheating?” A: “[I]t’s not my job to
fix the problem for Whirlpool . . . .”).) He made clear at the Daubert hearing that he cannot
explain what design features make the Ovens the same other than merely declaring that they
share the Vision II platform, and, at the hearing, de Richemond testified that he cannot describe
the design of the Vision II platform with any more detail beyond labeling it the “basic design” of
the Ovens. (See id. at 101–02 (Q: “What is the Vision II platform, sir?” A: “It’s the basic design
for all of these ovens.” Q: “Can you be any more specific about what makes [the Ovens] all the
same, in your opinion?” A: “No, I can’t.”).) Without identifying a specific design defect and
explaining how it is present in all Ovens, de Richemond does not give an opinion that fits
23
Plaintiffs’ class-certification argument. Chapman, 297 F.3d at 687; Mcfarland, 2015 WL
671802, at *1.
Even more problematic than his vague opinions and surface-level knowledge regarding
the Vision II platform, de Richemond has made clear that he does not know what causes a
particular Oven to fail or if the same defect causes different Ovens to fail, including the two
ovens of the named Plaintiffs. (R. 136-5, de Richemond Dep., 218–20; see also R. 212 at 75
(explaining that “for whatever reason, the oven shuts down”); R. 212 at 104–05 (explaining that
he does not know what caused the named plaintiffs’ ovens to fail).) Indeed, with respect to
Cates’ and Kljajic’s ovens, de Richemond testified at his deposition that the two ovens
“probably” failed for different reasons. (R. 136-5 at 220 (Q: “Do you think it’s the same [thing]
that caused Ms. Kljajic’s oven to experience [failure during self-cleaning] on the first use two
days after it was installed that also caused Ms. Cates’ oven to experience this on the third selfclean cycle ten years after it was installed?” A: “As I said just before, no. They’re probably two
different things. There are many factors that enter into causing this common failure and they
could be different. They could be the same. No one has determined that yet.”).) In addition, de
Richemond testified that he would “probably [have to] take both ovens apart” to learn if they
failed for the same reasons. (Id. at 221.) De Richemond thus essentially disclaims that he has
any opinion regarding a common cause of the Ovens’ failure during self-cleaning, contradicting
Plaintiffs’ assertions that he has identified a common defect.
Accordingly, the Court concludes that de Richemond does not offer an opinion as to a
common defect. Instead, he testifies that he does not know what in particular causes an oven to
fail, simply opines that there are many potential reasons the Ovens could fail during selfcleaning, and fails to explain or opine whether those many reasons are common to every Oven,
24
(see R. 212 at 110–11 (failing to explain what the Vision II platform is with any specificity)). De
Richemond’s uncertainty and equivocating testimony do not help the Court determine whether
there is a common question as to the existence of a defect that the trier of fact will be able to
resolve “in one stroke.” Wal-Mart Stores, Inc. v. Dukes, 564 U.S. 338, 350 (2011); see Comcast
Corp. v. Behrend, 133 S. Ct. 1426, 1432 (2013) (explaining that a party seeking class
certification must show that there are “in fact . . . common questions of law or fact” (quotation
marks omitted)); Parko v. Shell Oil Co., 739 F.3d 1083, 1085–87 (7th Cir. 2014) (noting that
Rule 23 “does not set forth a mere pleading standard” and that courts must evaluate evidence to
determine compliance with Rule 23, including whether there is a common cause of harm
(quoting Wal-Mart, 564 U.S. at 350)); Robinson v. Gen. Elec. Co., No. 09-cv-11912, 2016 WL
1464983, at *5 (E.D. Mich. Apr. 14, 2016) (“Simply stated, there is no evidence that a single
design flaw pertaining to safety mechanisms is common across all of the models in Option 2.
Plaintiffs’ failure to identify a single part, system, or even TCO temperature, defeats
commonality.”). In short, de Richemond’s opinions fail to satisfy Rule 702 and Daubert because
they are unhelpful.9
B.
De Richemond’s Opinions Are Unreliable
Even more glaring than his opinions’ unhelpfulness is the unreliability of de
Richemond’s inquiry and methods. In its role as gatekeeper, the Court must determine if expert
testimony is sufficiently reliable. See Higgins, 794 F.3d at 704. To determine reliability, courts
consider various nonexclusive factors, including “(1) whether the proffered theory can be and
9
The TSPs do not save de Richemond’s testimony. First, they constitute evidence that does not require an expert
opinion. Second, de Richemond’s testimony is based on an engineering opinion regarding ovens he examined, not a
simple review of the TSPs. Third, the TSPs are targeted to specific issues and do not cover all Ovens. Fourth, while
issuing TSPs is consistent with the existence of a common defect, they do not by themselves provide evidence tying
every oven in the class together. Whirlpool could issue TSPs based on a problem that occurs occasionally, but is not
based on a design defect inherent in every Oven. This is likely why Plaintiffs’ engaged an engineer as an expert to
examine the Ovens and attempt to opine on what aspect of their design causes failure during self-cleaning.
25
has been tested; (2) whether the theory has been subjected to peer review; (3) whether the theory
has been evaluated in light of potential rates of error; and (4) whether the theory has been
accepted in the relevant scientific community.” Baugh v. Cuprum S.A. de C.V., 845 F.3d 838,
844 (7th Cir. 2017); Mednick, 2016 WL 3213400, at *4 (citing Daubert, 509 U.S. at 593–94).
“[N]o single factor is either required in the analysis or dispositive as to its outcome.” Baugh,
845 F.3d at 844 (quoting Smith v. Ford Motor Co., 215 F.3d 713, 719 (7th Cir. 2000). “When a
district court ‘conclude[s] that there is simply too great an analytical gap between the data and
opinion proffered’ such that the opinion amounts to nothing more than the ipse dixit of the
expert, it is not an abuse of discretion under Daubert to exclude the testimony.” C.W., 807 F.3d
at 837 (quoting Gen. Elec. Co. v. Joiner, 522 U.S. 136, 146 (1997)).
Whirlpool argues that de Richemond’s opinions are unreliable because he failed to
disclose any methodology, let alone one that is reliable in his field, to substantiate his hypotheses
regarding a common Oven defect. (R. 134-1 at 9–11; R. 194 at 5–10.) The Court agrees.
To provide a brief summary before considering Whirlpool’s specific arguments, not only
is de Richemond unclear about what his opinion is as to a common defect across all Ovens, he
provides scant material as to how he reached any opinion. If de Richemond reached any specific
conclusion regarding a particular common defect—which, for the reasons noted above, he did
not—it was that the Ovens have an airflow problem, most notably that “air pulled into the ovensurrounding enclosure was pre-heated by the air moving upward through the door.” (R. 115-4 at
10–11; R. 115-5 at 2.) De Richemond also opines that such problems do not exist in ovens made
by other brands, like General Electric. (R. 115-4 at 10; R. 115-5 at 3.) De Richemond’s reports
leave the Court guessing as to the basis for these determinations. The testimony at the Daubert
hearing confirmed that de Richemond, who ran temperature tests only on Cates’s and Kljajic’s
26
ovens, conducted no testing regarding the cause of Ovens overheating and failing during selfcleaning. (See R. 212 at 78–79; id. at 102–03.) Indeed, de Richemond does not know why the
only two ovens he tested failed during self-cleaning. (R. 136-5 at 218–20; R. 212 at 104–05.)
Additionally, de Richemond did not test any non-Whirlpool ovens—including any General
Electric ovens—and admits that he gives no opinion regarding an effective alternative design.
(R. 212 at 103–04; R. 136-5 at 145–48.) By (1) not testing what causes failure during selfcleaning, (2) not testing ovens from other brands, (3) not offering an opinion as to an effective
alternative design, and (4) not knowing what causes a particular oven to fail, there is too large an
analytical gap between de Richemond’s methodology and his conclusion that all 2,000,000
Ovens suffer from a common defect. This gap necessitates the exercise of the Court’s
discretionary gate-keeping function—de Richemond’s expert testimony fails to satisfy Rule 702
and Daubert.
Whirlpool contends that de Richemond’s opinions “are derived from two separate,
testable hypotheses, one theorizing that the Ovens’ airflow design produces abnormally high
temperatures and another hypothesizing that an alternative design produces lower airflow
temperatures.” (R. 134-1 at 9.) While de Richemond’s opinions are difficult to pin down in light
of his changing testimony and Plaintiffs’ shifting theories and arguments, the Court agrees with
Whirlpool’s characterization. Whirlpool argues that de Richemond’s opinions are unreliable
because he did not derive them from the scientific method, he does not explain his methodology,
and he does not show that any methodology he may have used is accepted in his field. (Id. at 9–
11.)
As noted above, de Richemond testified during his deposition that the only testing he
conducted related to his airflow hypothesis was on the two ovens belonging to Plaintiffs. (R.
27
136-5 at 144–48.) De Richemond, however, admits that he did not test what caused the two
ovens to fail, does not know why the two ovens failed, and cannot say whether they failed for the
same reason.
With respect to his hypothesis that the Ovens present an airflow problem that does not
exist in other ovens (e.g., General Electric ovens), de Richemond testified during his deposition
that he did not conduct any testing on ovens from other brands because he was not asked to
conduct such testing and did not believe it necessary. De Richemond admitted, however, that he
could have conducted various tests to show how General Electric ovens and Whirlpool ovens
“perform[] differently.” (Id. at 146–48.) Rather than test, de Richemond merely asserted that his
hypothesis was “obvious” based on “what [he] know[s] about engineering physics and
thermodynamics, heat transfer, the way machines are made.” (Id. at 146–47.) He explained that
Whirlpool Ovens draw in preheated air while General Electric ovens do not, and that testing was
unnecessary because “[y]ou don’t need to go on to calculate things” once “you start out with two
different temperatures of air going into the device.” (Id. at 150.) De Richemond also testified
that there was no need to test the differences between General Electric and Whirlpool ovens
because there was “an indicator that one performs differently from the other”—that indicator
being “that we’re here today [in a deposition] because Whirlpool couldn’t fix a defect with its
ovens. We’re not here because GE . . . had a defect with their ovens.” (Id. at 148–49.)
“A court’s reliability analysis does not end with its conclusion that an expert is qualified
to testify about a given matter. Even ‘[a] supremely qualified expert cannot waltz into the
courtroom and render opinions unless those opinions are based upon some recognized scientific
method.’” Smith, 215 F.3d at 718 (alteration in original) (quoting Clark v. Takata Corp., 192
F.3d 750, 759 n.5 (7th Cir. 1999)); see also Am. Honda, 600 F.3d at 817; Ashley v. Schneider
28
Nat’l Carriers, Inc., Nos. 12-cv-8309, 13-cv-3042, 2016 WL 3125056, at *7 (N.D. Ill. June 3,
2016). Whether an expert’s theory can be or has been tested is a relevant consideration. See
Baugh, 845 F.3d at 844. Moreover, “[w]hether the expert has unjustifiably extrapolated from an
accepted premise to an unfounded conclusion” is relevant as well. See Mednick, 2016 WL
3213400, at *4 (quoting Fed. R. Evid. 702 (Advisory Committee Note (2000 amends.)); see also
C.W., 807 F.3d at 837; Brown, 765 F.3d at 773; Obrycka v. City of Chicago, 792 F. Supp. 2d
1013, 1019 (N.D. Ill. 2011).
Here, Plaintiffs have failed to satisfy their burden as to the reliability of de Richemond’s
methodology. De Richemond ran tests on only two ovens—the two that belonged to Plaintiffs—
one of which had previously failed during self-cleaning. To reach a conclusion that 2,000,000
Ovens contain a common defect based on the testing of only two ovens leaves too large a gulf in
analytical reasoning to qualify as reliable, especially given the differences in the Ovens. See
Joiner, 522 U.S. at 146 (“A court may conclude that there is simply too great an analytical gap
between the data the opinion proffered.”); C.W., 807 F.3d at 837; United States v. Schultz, No.
14-cr-467-3, 2016 WL 7409911, at *2 (N.D. Ill. Dec. 22, 2016). De Richemond’s mere word
that his testing was sufficient is not enough, particularly when he also admits that “[n]o one has
determined” what causes the Ovens to malfunction during self-cleaning. (R. 136-5 at 220.)
Further exhibiting the deficiencies in de Richemond’s methodology, the Ovens embody different
design elements, some of which—for example, the cooling fan—de Richemond admits are
related to failure during self-cleaning. (See, e.g., R. 212 at 115.) De Richemond’s testing on
only two ovens does not adequately account for design differences—not to mention one-off
manufacturing defects or defects present in a certain subset of the Ovens—across all of the
Ovens in the class. Furthermore, because de Richemond’s testimony at the Daubert hearing
29
demonstrated that he cannot explain what the Vision II platform is beyond saying that is the
“basic design” of the Ovens, it is unclear how he can jump to a conclusion about 2,000,000
Ovens based on his limited testing. (Id. at 101–02.) In short, de Richemond simply does not
have an adequate methodology in place for tying together every oven in the class. See
Metavante Corp. v. Emigrant Sav. Bank, 619 F.3d 748, 762 (7th Cir. 2010) (explaining that
expert testimony cannot “be based on subjective belief or speculation”).
Beyond the gap between (1) testing two Ovens and not knowing what caused their failure
or precisely how they are similar to all the Ovens in the class, and (2) using that testing to make a
conclusion about 2,000,000 ovens that embody different designs, de Richemond ignored relevant
contradictory data. This selective blindness underscores the unreliability of de Richemond’s
methodology. As detailed above, UL 858 testing showed that certain Ovens have successfully
completed self-cleaning cycles without incident. That testing data showed healthy temperature
margins for the TOD and thermal fuse during self-cleaning. While de Richemond dismissed this
data as irrelevant because UL 858 testing is geared toward safety, it is directly on point to the
issue of whether the Ovens have a common defect that invariably results in failure during selfcleaning.10 Ignoring relevant data is not a scientifically valid method. Indeed, this Court has
previously explained that “an expert is not permitted to simply ignore evidence that is contrary to
her opinion in implementing an accepted methodology.” See Chaudhry v. Provident Life &
Accident Ins. Co., No. 12-cv-5838, 2015 WL 1756832, at *5 (N.D. Ill. Apr. 15, 2015); see also
Barber v. United Airlines, Inc., 17 F. App’x 433, 437 (7th Cir. 2001) (“Because in formulating
his opinion Dr. Hynes cherry-picked the facts he considered to render an expert opinion, the
district court correctly barred his testimony because such a selective use of facts fails to satisfy
the scientific method and Daubert, and it thus fails to ‘assist the trier of fact.’”); EEOC v.
10
De Richemond testified that he believes all Ovens will fail during self-cleaning. (R. 212 at 81.)
30
Freeman, 778 F.3d 463, 469–70 (4th Cir. 2015) (citing a number of cases, including from the
First and D.C. Circuits for the proposition that “courts have consistently excluded expert
testimony that ‘cherry-picks’ relevant data”); Fail-Safe L.L.C. v. A.O. Smith Corp., 744 F. Supp.
2d 870, 891 (E.D. Wis. 2010); 29 Charles Alan Wright & Arthur R. Miller, Federal Practice &
Procedure: Evidence § 6268 (2d ed. 2017) (explaining that while whether a judge believes the
facts or data on which an expert relies is irrelevant, judges must inquire into the sufficiency of
data, including “whether the expert ignored a significant portion of seemingly important data”).
While failing to account for supposedly contradictory information often is a question going to
weight of the evidence rather than its admissibility, which a lawyer can address on cross
examination, see, e.g., Manpower, Inc. v. Ins. Co. of Pa., 732 F.3d 796, 807 (7th Cir. 2013)
(“[T]he selection of data inputs to employ in a model is a question separate from the reliability of
the methodology reflected in the model itself.”), in this case, de Richemond’s cherry picking
highlights the analytical gap between his methodology and conclusion, especially when viewed
in light of the many other deficiencies in his inquiry that the Court has examined, see id. at 808–
09 (noting that Rule 702 requires expert opinions to be supported by “sufficient facts or data” ).
This goes to the core of a district court’s responsibility under Daubert. See C.W., 807 F.3d at
837; Manpower, 732 F.3d at 808 (explaining that under Rule 702, courts may inquire as to
whether an expert considered sufficient data to employ a valid methodology).
De Richemond’s cherry picking also demonstrates that he has developed his opinion
expressly for the purposes of testifying, has not accounted for obvious alternative explanations,
and has not been as careful as an engineer would have been in his regular professional work. See
Am. Honda, 600 F.3d at 817 (noting these considerations from the advisory notes to Rule 702 as
additional guideposts for gauging expert reliability). Moreover, this is not the type of case where
31
an expert has chosen between two “competing theories when both are supported by reliable
scientific evidence.” See Kuhn v. Wyeth, Inc., 686 F.3d 618, 633 (8th Cir. 2012). Rather, it is a
case in which an expert had highly relevant data in front of him and effectively crossed out a
large portion of it without any adequate explanation.
De Richemond’s methodology (or lack thereof) underlying his conclusion that the Ovens’
airflow design is inferior to other ovens (like those General Electric manufactures) also has fatal
problems. As Plaintiffs explain, de Richemond bases this opinion on his observations and his
experience as an engineer. (R. 175 at 12–13.) This basis is not enough in this case. See Baugh,
845 F.3d at 844 (noting that courts consider “whether the proffered theory can be and has been
tested” under Daubert); Chapman, 297 F.3d at 688 (“In our opinion, the absence of any testing
indicates that Petry’s proffered opinions cannot fairly be characterized as scientific knowledge.
Personal observation is not a substitute for scientific methodology and is insufficient to satisfy
Daubert’s most significant guidepost.”); see also Hartman, 758 F.3d at 818–19 (“Howard’s
musings on the jag’s superiority cannot ‘substitute for scientific methodology and [are]
insufficient to satisfy Daubert’s most significant guidepost’: reliability.” (quoting Chapman, 297
F.3d at 688)); Zenith Elecs. Corp v. WH-TV Broad. Corp, 395 F.3d 416, 418 (7th Cir. 2005)
(rejecting an expert’s reliance on “intuition” in place of reliable principles and methods).
Of particular concern, Plaintiffs have failed to explain what scientific principles de
Richemond relied upon in concluding (1) that drawing in pre-heated air causes the ovens to fail
during self-cleaning (indeed, de Richemond does not know what causes the Ovens to fail), or
(2) that other aspects of the Ovens’ design do not render the preheated air immaterial (e.g., the
exhaust in the bottom of the oven or the fan). Plaintiffs contend that de Richemond’s
“experience” is sufficient, but without any articulation of the underlying technical principles
32
upon which he relied, let alone any testing, invoking experience is not enough. See Zenith, 395
F.3d at 419 (“A witness who invokes ‘my expertise’ rather than analytic strategies widely used
by specialists is not an expert as Rule 702 defines that term.”); Ruiz-Cortez v. City of Chicago,
No. 11 C 1420, 2016 WL 6270768, at *23 (N.D. Ill. Oct. 26, 2016); In re Zimmer Nexgen Knee
Implant Prods. Liability Litig., No. 12 C 6279, 2015 WL 5145546, at *8 (N.D. Ill. Aug. 31,
2015) (explaining that an expert must do more than “simply proclaim” his conclusion). The lack
of explanation regarding the scientific principles at issue as well as the lack of testing are
particularly problematic in this case, where testing may have provided support for de
Richemond’s conclusion, as de Richemond admits, (R. 136-5 at 146–48). See Baugh, 845 F.3d
at 844; Padilla v. Hunter Douglas Window Coverings, Inc., 14 F. Supp. 3d 1127, 1137–38 (N.D.
Ill. 2014) (“Statler’s opinions are particularly troubling because they actually lend themselves to
hands-on testing and empirical study ‘such that conclusions based only on personal opinion and
experience do not suffice.’” (quoting Dhillon v. Crown Controls Corp., 269 F.3d 865, 870 (7th
Cir. 2001))). Moreover, the fact that various oven brands, like Siemens, have a design like the
Ovens in which pre-heated air is pulled through the oven door further undermines the reliability
of de Richemond’s methodology. (R. 136-13, Ex. 1 at WKL 0012107, WKL0012117.) Testing
results showed that the Siemens ovens had cooler control and latch temperatures than ovens
using a different airflow design even though the Siemens ovens had a hotter oven cavity
temperature. (R. 194 at 13.) De Richemond’s failure to adequately account for this data further
highlights the unreliability of his methodology.
On a final note with respect to de Richemond’s opinions related to the differences
between General Electric and Whirlpool ovens, de Richemond relied, at least in part, on the mere
fact that Plaintiffs commenced this litigation against Whirlpool rather than GE. (R. 136-5 at
33
148–49.) It almost goes without saying that relying on such inappropriate considerations falls far
short of the Daubert requirements.
Even viewing de Richemond’s identification of a defect broadly—that the common
defect is that all Ovens will overheat and fail during self-cleaning for reasons unknown—his
methodology is unreliable. Once again, he tested only two ovens, one of which failed
previously, to reach this conclusion. Because he knows neither the cause of those ovens’ failure
nor precisely what makes Vision II ovens the same, his testing is insufficient to extrapolate to a
common defect affecting 2,000,000 Ovens. Additionally, while he testifies that all the Ovens
will fail during self-cleaning because of a common defect, (R. 212 at 81), de Richemond does
not account for the fact that UL 858 testing showed various Ovens survived self-cleaning cycles,
Plaintiff Cates’s oven survived self-cleaning on multiple occasions, and third-party testing
“found no issues with Nutid IKEA models overheating during the self-clean cycle”, (see R. 1362 at ¶ 81).11 This further highlights the inadequacy of de Richemond’s methods.12
Accordingly, Plaintiffs have not established the requisite reliability or helpfulness of de
Richemond’s expert testimony. The Court therefore grants Whirlpool’s Daubert motion.
II.
Plaintiffs Have Not Demonstrated Compliance with Rule 23
At the Daubert hearing, Plaintiffs admitted that they face a “very difficult” and “uphill
fight” on the road to class certification if the Court excluded de Richemond’s testimony. (R. 212
at 139.) They were correct. As described in greater detail below, the key flaw in Plaintiffs’ case
for class certification is a failure to put forth sufficient evidence of a defect common in all
11
The Court notes that Kljajic’s ovens were not Nutid models. (See supra Background, § II.B.)
12
As noted above, the TSPs cannot save de Richemond’s testimony. See supra n.9. The Court also notes that
because Plaintiffs admit that de Richemond gives no opinion regarding warranty rates, the Court does not consider if
de Richemond appropriately relied on a supposedly high rate of warranty repairs. (See R. 175 at 15; see also R.
134-1 at 18; R. 194 at 14–15.)
34
Ovens. Without this crucial evidence, Plaintiffs lack the glue to hold their proposed classes
together. In short, Plaintiffs fail to demonstrate that the most important factual question in this
case—whether the Ovens have an inherent design defect—is “capable of classwide resolution.”
See Phillips v. Sheriff of Cook Cty., 828 F.3d 541, 553 (7th Cir. 2016) (quoting Wal-Mart, 564
U.S. at 350). Under these circumstances, Plaintiffs have not demonstrated that class certification
is appropriate.
A.
Plaintiffs’ Claims and the Centrality of a Common Defect
Plaintiffs pursue the following class claims: breach of express warranty under the laws of
17 states, breach of implied warranty under Illinois law, violation of the MMWA, unjust
enrichment under Illinois and South Carolina law, and violation of the ICFA. (R. 114 at 9–10.)
To prove their claims, Plaintiffs seek to show that all Ovens’ self-cleaning feature will not
function as it is supposed to because all Ovens are defectively designed. (See, e.g., id. at 3; id. at
28 (explaining that all “Ovens suffer from the Defect at issue”); id. at 14 (“Plaintiffs allege a
common course of conduct stemming from a common set of operative facts. Namely, all Ovens
share the same inherent Defect . . . .”); R. 167 at 1 (“[P]oor airflow through the oven-surrounding
enclosure’ is the design defect (“Defect”) that is common to the Ovens.” (quotation marks
omitted)); R. 167 at 1 (“The central, common issue in this litigation is that Whirlpool’s Ovens
fail when self-cleaning is run because the overarching design results in ineffective heat flow
regulation and heat removal.” (quotation marks omitted)).) Thus, as Plaintiffs admit, “[c]ommon
evidence of the existence a Defect” is an issue central to class certification. (See R. 114 at 24–
26; R. 167 at 1.)
35
The elements of breach of express warranty are, broadly speaking, the existence of a
warranty, breach of the warranty, and damages resulting from the breach.13 See, e.g., Scott v.
Honeywell Int’l Inc., No. 14-cv-00157-PAB-MJW, 2015 WL 1517527, at *3 (D. Colo. Mar. 30,
2015) (citing Palmer v. A.H. Robbins Co., 684 P.2d 187 (Colo. 1984)); Wetzel v. Capital City
Real Estate, LLC, 73 A.3d 1000, 1005 (D.C. 2013); Frese v. City Segway Tours of Washington,
D.C., LLC, No. 16-2373 (JEB), 2017 WL 1379314, at *6 (D.D.C. Apr. 14, 2017); Scottsdale Ins.
Co. v. Deere & Co., 115 F. Supp. 3d 1298, 1307–08 (D. Kan. 2015); Corwin v. Conn. Valley
Arms, Inc., 74 F. Supp. 3d 883, 892 (N.D. Ill. 2014); Renaissance Leasing, LLC v. Vermeer Mfg.
Co., 322 S.W.3d 112, 122 (Mo. 2010) (en banc) (requiring proof that the goods did not conform
from a material statement of fact as to the good’s quality); Snyder v. Farnam Cos., Inc., 792 F.
Supp. 2d 712, 721 (D.N.J. 2011); Prichard Enters., Inc. v. Adkins, 858 F. Supp. 2d 576, 584
(E.D.N.C. 2012); Kraft Foods N. Am. v. Banner Eng’g Sales, Inc., 446 F. Supp. 2d 551, 570–72
(E.D. Va. 2006).
To prove breach of the implied warranty of merchantability under Illinois law, a plaintiff
must show that the defendant sold goods that were not merchantable at the time of sale, damages
that resulted from the defective goods, and notice to the defendant. See Corwin, 74 F. Supp. 3d
at 891.14
As for the MMWA, it “allows consumers to enforce written and implied warranties in
federal court, borrowing state law causes of action.” Schimmer v. Jaguar Cars, Inc., 384 F.3d
13
The parties dispute certain elements of warranty claims, like whether presuit notice is required, whether
manifestation of a defect is required, and whether privity and/or reliance is required. (See, e.g., R. 130 at 40.)
Because Plaintiffs’ fail to tie their claims together with evidence of a common defect in all Ovens, the Court need
not consider the differences in state law to which Whirlpool points, or, if such differences exist, whether the creation
of subclasses is appropriate.
14
It does not appear Plaintiffs are pursuing a claim of breach of implied warranty of fitness for a particular purpose,
as they enumerate the elements of only breach of implied warranty of merchantability. (See R. 114 at 25 & n.12; R.
167 at 6.)
36
402, 405 (7th Cir. 2004); Keith v. Ferring Pharm., Inc., No. 15 C 10381, 2016 WL 5391224, at
*8 (N.D. Ill. Sept. 27, 2016); Bietsch v. Sergeant’s Pet Care Prods., Inc., No.15 C 5432, 2016
WL 1011512, at *7 (N.D. Ill. Mar. 15, 2016). The parties therefore treat the MMWA claims as
coextensive with the state-law warranty claims. (R. 167 at 18; R. 130 at 26 n.20.)
The elements of an ICFA claim are a deceptive or unfair act or practice by defendant, the
defendant’s intent that the plaintiff rely on the deceptive or unfair act or practice, and the act or
practice took place during a course of conduct involving commerce. Siegel v. Shell Oil Co., 612
F.3d 932, 934 (7th Cir. 2010); Sultan v. M&T Bank, No. 16-CV-08767, 2017 WL 1304103, at *4
(N.D. Ill. Apr. 7, 2017).
An Illinois unjust enrichment claim requires a showing that the defendant “unjustly
retained a benefit to the plaintiff’s detriment, and that the defendant’s retention of the benefit
violates the fundamental principles of justice, equity, and good conscience.” McMahon v.
Bumble Bee Foods LLC, 148 F. Supp. 3d 708, 715 (N.D. Ill. 2015) (quoting Indep. Voters v. Ill.
Commerce Comm’n, 510 N.E.2d 850, 852–58 (1987)). In South Carolina, the elements of unjust
enrichment are “(1) a benefit conferred by the plaintiff upon the defendant; (2) realization of that
benefit by the defendant; and (3) retention of the benefit by the defendant under circumstances
that make it inequitable for him to retain it without paying its value.” Roberts v. Ebay Inc., No.
6:14-4904-HMH-MGB, 2017 WL 525925, at *4 (D.S.C. Feb. 9, 2017) (quoting Regions Bank v.
Wingard Props., Inc., 715 S.E.2d 348, 356 (S.C. Ct. App. 2011)).
37
B.
Plaintiffs Fail to Demonstrate Entitlement to Class Certification
1.
Commonality and Predominance
a.
Legal Standards
The Court begins with the closely related questions of commonality and predominance.
Rule 23(a)(2)—the commonality provision—requires that “there are question of law or fact
common to the class.” Rule 23(b)(3)—the predominance provision—requires that “the questions
of law or fact common to the class predominate over any questions affecting only individual
members.” “The question[s] of commonality and predominance [can] overlap in ways that make
them difficult to analyze separately.” See Bell, 800 F.3d at 374. Consequently, “they are often
addressed together.” See Tomeo v. W&E Commc’ns, Inc., No. 14 C 2431, 2016 WL 8711483, at
*16 (N.D. Ill. Sept. 30, 2016).
In Wal-Mart Stores, Inc. v. Dukes, the Supreme Court noted that it “is easy to misread”
the language of Rule 23(a)(2) “since [a]ny competently crafted class complaint literally raises
common ‘questions.’” 564 U.S. 338, 349 (2011) (alteration in original) (quotation marks
omitted) (quoting Richard A. Nagareda, Class Certification in the Age of Aggregate Proof,
N.Y.U. L. Rev. 97, 131–32 (2009)). While “[e]ven a single [common] question” is sufficient, id.
at 359 (alterations in original), “superficial common questions—like whether each class member
is a[ Milwaukee Public School] student or whether each class member ‘suffered a violation of
the same provision of law’—are not enough,” Jamie S. v. Milwaukee Public Schs., 668 F.3d 481,
497 (7th Cir. 2012) (quoting Wal-Mart, 564 U.S. at 350); see also Vill. of Bedford Park v.
Expedia, Inc., No. 13 C 5633, 2015 WL 94851, at *2 (N.D. Ill. Jan. 6, 2015). Instead, the
Supreme Court has said and the Seventh Circuit has reiterated that “[c]ommonality requires the
plaintiff to demonstrate that class members have suffered the same injury at the hands of the
38
same defendant.” McCaster, 845 F.3d at 800 (alteration in original) (quotation marks omitted)
(quoting Wal-Mart, 564 U.S. 349–50); see also Jamie S., 668 F.3d at 497. Plaintiffs must show
that “the same conduct or practice by the same defendant gives rise to the same kind of claims
from all class members.” McCaster, 845 F.3d at 800 (quoting Suchanek v. Sturm Foods, Inc.,
764 F.3d 750, 756 (7th Cir. 2014)). Additionally:
What matters to class certification . . . is not the raising of common
‘questions’—even in droves—but, rather the capacity of a
classwide proceeding to generate common answers apt to drive the
resolution of the litigation. Dissimilarities within the proposed
class are what have the potential to impede the generation of
common answers.
Wal-Mart, 564 U.S. at 350 (quoting Nagareda, supra, at 132).
Predominance is similar to commonality but “the predominance criterion is far more
demanding.” McCaster, 845 F.3d at 800 (quoting Amchem Prods., Inc. v. Windsor, 521 U.S.
591, 623 (1997)). “The predominance inquiry ‘asks whether the common, aggregation-enabling,
issues in the case are more prevalent or important than the non-common, aggregation-defeating,
individual issues.’” Tyson Foods v. Bouaphakeo, 136 S. Ct. 1036, 1045 (2016) (quoting 2 W.
Rubenstein, Newberg on Class Actions § 4.49, pp. 195–96 (5th ed. 2012)). Predominance calls
for a “qualitative assessment”; “it is not bean counting.” Butler v. Sears, Roebuck & Co., 727
F.3d 796, 801 (7th Cir. 2013). In short, “the ‘predominance inquiry tests whether proposed
classes are sufficiently cohesive to warrant adjudication by representation.” Parko, 739 F.3d at
1085 (quoting Amchem, 521 U.S. at 623).
b.
Analysis
Plaintiffs enumerate eight allegedly common factual questions and five allegedly
common questions of law. (R. 114 at 22–23.) The existence of a defect in all Ovens that causes
the Ovens to fail during self-cleaning is the foundation of each factual issue in Plaintiffs’ list.
39
(See id.) “Whether the Ovens are prone to fail when the self-cleaning feature is used,” for
example, turns on whether each Oven is defective; “[w]hether Whirlpool knew or should have
known that the Ovens are prone to fail when the self-cleaning feature is used” is similarly
predicated on the existence of a defect; “[w]hether Plaintiffs and Class members [were] damaged
by purchasing Ovens with a defect that makes the Ovens prone to fail when the self-cleaning
feature is used” turns on the existence of a defect; and “[w]hether Whirlpool was unable to repair
the Ovens consistent with Defendant Whirlpool’s warranty obligations” is irrelevant if the Ovens
are not defective. (Id.) The legal issues Plaintiffs list—for example, “[w]hether Whirlpool
breached express and implied warranties” and “[w]hether Whirlpool was unjustly enriched”—are
broad and generic. (Id.) They are akin to asking whether each class member “suffered a
violation of the same provision of law” or, as was the case in Jamie S. v. Milwaukee Public
Schools, asking whether the “[defendant] fulfill[ed] its [Individuals with Disabilities Education
Act] obligations to each child.” 668 F.3d at 497–98 (quoting Wal-Mart, 564 U.S. at 350). Such
questions are the sort of “superficial common questions” that are insufficient under Rule
23(a)(2), let alone Rule 23(b)(3). See id.; see also Bedford Park, 2015 WL 94851, at *2.
Whirlpool argues that “Plaintiffs’ Motion [for Class Certification] is necessarily premised
on an alleged design defect that uniformly affects all Ovens” and that Plaintiffs “offer no
credible evidence showing that a uniform defect exists across all ovens.” (R. 130 at 19–20
(emphasis in original).) The Court agrees. Plaintiffs have not shown that the critical issue of
whether the Ovens are defective is susceptible to classwide proof—in other words, Plaintiffs
failed to show that “a classwide proceeding will generate common answers” and that the most
important question in this case can be resolved in “one stroke.” Wal-Mart, 564 U.S. at 350.
40
Even with de Richemond’s testimony, which the Court has already excluded, Plaintiffs
have not provided evidence that shows that a classwide proceeding will yield a common answer
to the question of whether the Ovens are defective. Instead, the evidence before the Court would
call for individualized inquiries.
There are two key problems with Plaintiffs’ evidence. First, as described in detail above,
their engineering expert has admitted that he does not know what causes an Oven to fail during
self-cleaning and has admitted that two Ovens may fail for different reasons. If Plaintiffs had
identified a common cause—specifically, some element of defective design common to all
Ovens—then a class proceeding could resolve the question of whether the Ovens were defective
in one stroke. Without identifying a common cause, however, Plaintiffs cannot tie the Ovens
together in a way that facilitates the efficient resolution of the question of whether the Ovens
suffer from a defect. In other words, without a common cause, it is impossible to extrapolate
from a particular Oven’s failure during self-cleaning to learn anything about all 2,000,000
Ovens. Consequently, the case would devolve into individualized inquiries. That Whirlpool has
shown that the Ovens have different designs—including design aspects that de Richemond
admitted are material (e.g., fan speed)—further highlights the need for individualized inquiries.
Additionally, Whirlpool’s testing data, including the UL 858 testing and the testing of IKEA
Nutid and Datid ovens, show that at least some Ovens completed self-cleaning cycles without
incident and that at least some Ovens had healthy temperature margins during self-cleaning. A
class proceeding makes little sense under the present circumstances.
41
Plaintiffs rely on a line of class action cases involving Whirlpool’s front-loading washing
machines—namely Butler v. Sears, Roebuck & Co., 702 F.3d 359 (7th Cir. 2012) (Butler I),15
Butler v. Sears, Roebuck & Co., 727 F.3d 796 (7th Cir. 2013) (Butler II), and In re Whirlpool
Corp Front-Loading Washer Prods. Liability Litig., 722 F.3d 838 (6th Cir. 2013). (See R. 114 at
19–22 & n.8.) These cases dealt with an alleged design defect in front-loading, high-efficiency
washing machines that caused mold growth and unpleasant odors. See Butler I, 702 F.3d at 361;
id. at 363 (explaining that the Sixth Circuit washing-machine litigation was “identical” with
respect to the mold claim).
In the front-loading washing machine cases, unlike the current case, Plaintiffs identified a
specific design issue common to all washing machines in the class that caused the mold and odor
problem. As the court explained in Butler II:
The claim in the mold class action is that because of the low
volume and temperature of the water in the front-loading machines
compared to its volume and temperature in the traditional toploading machines, they don’t clean themselves adequately and as a
result mold accumulates that emits bad odors.
727 F.3d at 798. The defendant claimed that the manufacturer “made a number of design
modifications [to the washing machines purchased by putative class members], and as a result
different models are differently defective.” Id. at 798. The defendant, however, “d[id] not
contend that any of the design changes eliminated the odor problem, only that they diminished
it.” Id. Thus, although damages were likely to vary across the members of the class, the
common question of whether the “the machines [were] defective in permitting mold to
accumulate and generate noxious odors” was susceptible to classwide proof and a class action
was therefore efficient. Id. The finder of fact would simply need to focus on the design issue
15
The Supreme Court vacated this opinion and remanded it for further consideration in light of intervening Supreme
Court precedent. See Sears, Roebuck & Co. v. Butler, 133 S. Ct. 2768 (2013). Upon remand, the Seventh Circuit
reinstated its judgment from Butler I. See Butler v. Sears, Roebuck & Co., 727 F.3d 796 (7th Cir. 2013) (Butler II).
42
Plaintiffs identified (the use of low water volume and temperature) to generate a common answer
to a critical question in the litigation.
The Sixth Circuit front-loading washing machine case exhibits the efficiency of a class
action where the plaintiff identifies a particular common design defect. In that case, the court
noted that “front-loading machines promote mold or mildew more readily because of the lower
water levels used and the higher moisture content within the machines, combined with reduced
ventilation.” Whirlpool, 722 F.3d at 847. Plaintiffs presented expert witnesses who gave
opinions focused on the specific, common design defect that caused the mold problem. See id.
(noting the plaintiffs’ experts who explained that the washing machines failed to self-clean).
One expert further explained that he examined later-generation models of the washing machines
and found that that they still contained the defective design despite some design changes. See id.
at 854–55. Because plaintiffs identified and provided evidence of a common design defect that
caused the mold problem, the court certified the class because “proof in this case will produce a
common answer about whether the alleged design defects in the [washing machines] proximately
caused mold or mildew to grow in the machines.” Id. at 855. The class was cohesive and would
“prevail or fail in unison.” See id. at 859 (quoting Amgen Inc. v. Conn. Ret. Plans & Tr. Funds,
133 S. Ct. 1184, 1191 (2013)).16
Plaintiffs’ failure to identify a common defect or present a coherent theory as to what
causes an Oven to fail during self-cleaning (indeed, Plaintiffs’ expert appears to simply shrug his
shoulders at the question of causation) distinguishes the current case from the front-loading
washing machine cases. Here, Plaintiffs present no evidence as to the common cause of an
Oven’s failure during self-cleaning. Moreover, while Plaintiffs’ expert attempts to tie all Ovens
16
Pella Corp. v. Saltzman, another case Plaintiffs cite, dealt with a single design defect in windows that allowed
“water to seep behind the aluminum cladding” and cause wood rot. 606 F.3d 391, 392–93 (7th Cir. 2010) (per
curiam). It is therefore similar to Butler.
43
together because they share the Vision II platform, his attempt falls flat because (1) he does not
know what causes failure during self-cleaning, let alone what about the Vision II platform in
particular causes failure during self-cleaning, and (2) he knows what the Vision II platform is at
a level of generality so high that he is effectively without knowledge of what makes the Ovens’
design similar, (see R. 212 at 101–02 (Q: “What is the Vision II platform, sir?” A: “It’s the basic
design for all of these ovens.” Q: “Can you be any more specific about what makes [the Ovens]
all the same, in your opinion?” A: “No, I can’t.”)). Thus, unlike in the washing-machine cases, a
class-action proceeding will not allow a factfinder to resolve the critical question of whether the
Ovens are defective in one stroke. In other words, while Plaintiffs present a superficial common
question of whether the Ovens are defective, they do not meet their burden to show that the
question will efficiently generate a common answer that will drive the litigation forward. See
Wal-Mart, 564 U.S. at 350. Additionally, Plaintiffs have not shown that they “suffered the same
injury.” McCaster, 845 F.3d at 800 (quotation marks omitted) (quoting Wal-Mart, 564 U.S.
349–50). Consequently, even with de Richemond’s opinions, Plaintiffs fail to carry their burden
with respect to commonality and predominance, particularly in light of their list of common
questions, (see R. 114 at 22–23), which turn on proof of a common defect.
A number of cases—including post-Butler cases—confirm the Court’s reading of Butler
and the need for the identification of a specific design defect to tie a broad swath of consumer
products together in a class proceeding. In Robinson v. General Electric Co., for example, the
court considered various alleged common questions concerning the existence of a common
defect. See No. 09-cv-11912, 2016 WL 1464983, at *5 (E.D. Mich. Apr., 14, 2016). The
plaintiffs argued that the common defect was “inadequate safety mechanisms.” Id. at *3, *5.
The court concluded that the plaintiffs failed to satisfy the commonality requirement because,
44
“[s]imply stated, there is no evidence that a single design flaw pertaining to safety mechanisms is
common across all of the models in [the class].” Id. at *5. The plaintiffs had asserted a design
flaw “at the highest level of generality”—too high to present a common issue susceptible to
classwide proof. See id. at *6. The court further noted that in Whirlpool, “[the] plaintiffs
identified specific design defects that caused the alleged propensity to malfunction.” Id.
Additionally, the Robinson court explained, “The Whirlpool plaintiffs were able to tie their
generalized theory to an identified part . . . that caused mold problems. Plaintiffs have not done
that here.” Id. (citation omitted).
In Mednick v. Precor, Inc., the plaintiffs sought to certify a class of individuals who
purchased a Precor exercise machine with a touch sensor heart rate monitor. No. 14 C 3624,
2016 WL 3213400, at *3 (N.D. Ill. June 10, 2016). Precor sold twenty different machines—five
treadmills, eight elliptical machines, one adaptive motion trainer elliptical machine, and six
stationary bicycles—with a heart rate monitor. Id. at *1. The heart rate monitors were
manufactured by three different companies. Id. Plaintiffs’ biomedical engineering expert tested
a single subject on the two plaintiffs’ personal treadmills and on one other model treadmill. Id.
at *2. He opined that “motion artifact”—“the actual movement of the user while exercising”—
could disrupt heart-rate measurements on the Precor machines. Id. Precor’s expert tested
twenty-two individuals of varying ages, heights, weights and cardio-physiologies on all twenty
machines. Id. Precor’s expert found that the heart rate monitors on all machines functioned
properly, but “the rate of accuracy varied based on factors including the user’s physiology, the
machine being tested, the type and intensity of the motion, and the machine’s incorporated heart
rate system.” Id. at *3. He also criticized the plaintiffs’ expert for testing only one person on
one heart rate system on only one type of machine because the twenty Precor machines at issue
45
used three different heart-rate monitoring systems, each type of machine required different types
of movement, and individual users “have varied physiology and physical attributes, and may grip
hand sensors and use exercise equipment differently.” Id.
The Mednick court first struck and excluded the plaintiffs’ expert’s testimony. See id. at
*5–6. The court then denied the plaintiffs’ motion for class certification. Id. at *8. The court
found there was too large a gap between the existence of “motion artifact” and the conclusion
that all twenty Precor machines are defective because the heart rate monitors were “unable to
compensate for [motion artifact] and provide a reliable heart rate reading.” Id. at *7. Further,
the court explained that the question of whether the Precor machines were defective—at least on
the plaintiffs’ evidence—could not be answered “for all members of the putative class in a single
adjudication, but rather would require an individualized inquiry into each user, each type of
machine and each heart rate system at issue.” Id. at *7.
The Seventh Circuit’s opinion in In re Bridgestone/Firestone, Inc., also shows that
certification is inappropriate in product-defect cases where the plaintiff has not tied together an
entire product line comprised of similar—but not identical—products in a way that facilitates a
“once-and-for-all decision” about the full line. 288 F.3d 1012, 1019 (7th Cir. 2002). In that
case, the court reversed the district court’s decision to certify two nationwide classes in a lawsuit
involving tires where there were six trade names and “67 master tire specifications” with
different safety features and “failure modes.” Id. Plaintiffs in the current case have similarly
failed to provide the glue that holds all the class claims. See also Mednick, 2016 WL 3213400,
at *7 (relying on Bridgestone); Johnson v. Harley-Davison Motor Co. Grp., 285 F.R.D. 573, 579
(E.D. Cal. 2012) (finding “no common method of proof to show whether there is a design
46
defect” because, across the class of vehicles at issue, there were “more than 130 configurations
and numerous factors affecting heat”).
In short, even with de Richemond’s testimony, Plaintiffs cannot satisfy the commonality
or predominance requirements. “Rule 23 does not set forth a mere pleading standard”—and
Plaintiffs failure to show that they have suffered the same injury or that the key questions in this
case (even as Plaintiffs frame them, (see R. 114 at 22–23)) can be resolved with common
evidence in a single stroke.
The Court further notes that Plaintiffs’ evidence outside of de Richemond’s testimony
does little to support their case for class certification. While Plaintiffs cite their second expert,
the statistician Nozer Singpurwalla, for an exceedingly vague framing of the alleged cause of the
self-cleaning defect—“a non-robust design,” (R. 114 at 4)—Plaintiffs explain that Singpurwalla
is a rebuttal expert against Whirlpool’s experts who will assist the trier of fact in showing that
Whirlpool’s data is irrelevant, not mathematically sound, and that it obfuscates failure rates of
the Ovens. (R. 180, Pls.’ Mem. Opp. Def. Mot. Exclude Singpurwalla, 1.) Plaintiffs make clear
that they do not proffer Singpurwalla “to opine on the mechanical deficiencies of the Ovens” and
that his report “focuses exclusively on the flaws in the statistical aspects of Whirlpool’s expert
reports.” (Id. at 2.) In their briefs in support of class certification, Plaintiffs cite Singpurwalla’s
report a single time, but fail to explain with any detail how his report constitutes evidence that
there is a single, inherent defect in the Ovens. (R. 14 at 4.) In short, Plaintiffs do not use
Singpurwalla’s opinion to affirmatively support their class certification argument, and the Court
will not make Plaintiffs’ arguments for them. Singpurwalla’s rebuttal testimony, assuming it is
admissible, does not cure Plaintiffs’ failure to identify an aspect of design common to all Ovens.
47
Plaintiffs other evidence of a common defect falls short in the absence of expert
engineering evidence. In a section of their reply brief, Plaintiffs argue that there is non-expert
evidence supporting the existence of a common defect. (R. 167 at 9.) They cite the anecdotal
evidence of an IKEA executive who said he was hesitant to use the self-cleaning feature of the
Datid oven. (R. 167 at 9.) While such evidence is perhaps bad PR for IKEA and Whirlpool, it is
not enough to tie all of the Ovens in the class together. Similarly, the TSPs, particularly without
adequate expert engineering testimony, are not enough to make this case like Butler. They
cannot replace expert evidence, and the TSPs are targeted to specific issues and do not cover all
Ovens. Additionally, as explained above, while issuing TSPs is consistent with the existence of
a common defect, they do not by themselves provide evidence tying every oven in the class
together, particularly in light of the UL 858 testing data (as well as other similar testing data)
showing some Ovens successfully complete self-cleaning. Plaintiffs do not point to any other
evidence in this section of their reply brief describing the non-expert evidence supporting the
existence of a common defect, nor do they point to any other evidence in defining the defect at
issue in their opening brief, (see R. 114 at 3.) They have simply failed to provide evidence to tie
all of the ovens together in a way that will allow the finder of fact to determine in a single stroke
if the Ovens are defective. Plaintiffs, therefore, have failed to establish commonality and
predominance.
2.
Typicality
Under Rule 23(a)(3), Plaintiffs must show “the claims or defenses of the representative
parties are typical of the claims or defenses of the class.” Fed. R. Civ. P. 23(a)(3). To meet this
requirement, the class representatives’ claims must “arise[] from the same event or practice or
course of conduct that gives rise to the claims of other class members.” Oshana v. Coca-Cola
48
Co., 472 F.3d 506, 514 (7th Cir. 2006) (quoting Rosario v. Livaditis, 963 F.2d 1013, 1018 (7th
Cir. 1992)); see also Muro v. Target Corp., 580 F.3d 485, 492 (7th Cir. 2009); Schneider, 2016
WL 7840218, at *7. Some factual distinctions between the class representatives’ claims and
those of other class members does not defeat typicality, but the representatives’ claims must
“have the same essential characteristics as the claims of the class at large.” Arreola v. Godinez,
546 F.3d 788, 798 (7th Cir. 2008) (quoting Oshana, 472 F.3d at 514). Typicality overlaps with
commonality. See Spano v. Boeing Co., 633 F.3d 574, 586 (7th Cir. 2011).
Plaintiffs fail to demonstrate they meet the typicality requirement for the same reasons
they fail to show compliance with the commonality and predominance requirements. By failing
to tie all the Ovens together with sufficient evidence of a common defect, Plaintiffs cannot show
that their claims arise out of the same event or course of conduct as all class members. See
Retired Chi. Police Ass’n v. City of Chicago, 7 F.3d 584, 597 (7th Cir. 1993) (“Because the
[plaintiff, the Retired Chicago Police Association,] does not include individuals from all of the
fund groups and there is no indication that each of these groups was treated identically by the
City or by its respective fund, its claims cannot be deemed typical of the entire proposed class.”);
Robinson, 2016 WL 1464983, at *8 (“Plaintiffs’ typicality and commonality theory have the
same flaw: their general hypothesis is not subject to common proof. If [a class representative]
proved his own claim regarding his own model, that would not necessarily prove anyone else’s
claim.”); see also Deiter v. Microsoft Corp., 436 F.3d 461, 466 (4th Cir. 2006) (explaining that
the “essence” of typicality is that the named plaintiff’s and the class members’ claims rise and
fall in unison).17
17
Because the Court has concluded that Plaintiffs have failed to establish typicality and commonality, the Court
need not consider whether Plaintiffs have satisfied numerosity (which Whirlpool does not challenge) or adequacy.
The Court notes, however, that “if [a named plaintiff’s] claim is atypical, he is not likely to be an adequate
representative; his incentive to press issues important to the other members of the class will be impaired.” Robinson
49
C.
Plaintiffs Are Not Entitled to Certification Under Rule 23(b)(2)
Plaintiffs Rule 23(b)(2) classes both fail for failure to satisfy Rule 23(a)’s requirements.
They also fail for a number of additional reasons.
First, Plaintiffs’ Rule 23(b)(2) classes are insufficiently cohesive to warrant certification
under Rule 23(b)(2). The Rule requires that “the party opposing the class has acted or refused to
act on grounds that apply generally to the class, so that final injunctive or corresponding
declaratory relief is appropriate respecting the class as a whole.” Fed. R. Civ. P. 23(b)(2). The
Rule “operates under the presumption that the interests of the class members are cohesive and
homogenous such that the case will not depend on adjudication of facts particular to any subset
of the class.” Lemon v. Int’l Union of Operating Eng’rs, Local No. 139, AFL-CIO, 216 F.3d
577, 580 (7th Cir. 2000); see also Wal-Mart, 564 U.S. at 360 (“The key to the (b)(2) class is ‘the
indivisible nature of the injunctive or declaratory remedy warranted—the notion that the conduct
is such that it can be enjoined or declared unlawful only as to all of the class members or as to
none of them.’” (quoting Nagareda, supra, at 132)); Penn. Chriopractic Ass’n v. Blue Cross Blue
Shield Ass’n, 286 F.R.D. 355, 376–77 (N.D. Ill. 2012). Because, as explained above, Plaintiffs
have failed to show how the Court could find all of the Ovens defective based on classwide
proof—the class is insufficiently cohesive and depends on the adjudication of individual issues.
This is antithetical to the point of Rule 23(b)(2), under which “[t]he glue that makes a class
action efficient . . . is that the class members’ claims are so inherently intertwined that injunctive
relief as to any would be injunctive relief as to all.” Rubenstein, supra, at § 4:34.
Second, injunctive relief is inappropriate for the entire class. Plaintiffs seek in the
alternative to their Rule 23(b)(3) class, two Rule 23(b)(2) classes consisting of “All individuals
v. Sheriff of Cook Cty.,167 F.3d 1155, 1157 (7th Cir. 1999); see also Muro, 580 F.3d at 493. Here, because
Plaintiffs have failed to present sufficient evidence of a common defect, Plaintiffs may not be adequate
representatives of all the class members, who may have Ovens that suffer from a distinct defect or none at all.
50
residing in the States identified in Exhibit 1 who purchased a Whirlpool Oven with a selfcleaning mechanism” and “All individuals residing in the States identified in Exhibit 1 who
purchased a Whirlpool Oven sold by IKEA with a self-cleaning mechanism.” (R. 114 at 9–10.)
They seek “injunctive relief [to] force Whirlpool to remedy the Defect and fully inform putative
class members and the public regarding problems with the Ovens.” (R. 167 at 27 (citing a case
in which plaintiffs sought to remedy a false advertising campaign).) Rule 23(b)(2) classes
require that the contemplated equitable relief be “appropriate respecting the class as a whole”
and “final.” Karman v. State Farm Mut. Auto Ins. Co., 634 F.3d 883, 892 (7th Cir. 2011). Here,
Plaintiffs have failed to show that they can “satisfy the test for a remedy in equity” for the class
as a whole. Id. To be entitled to equitable relief, a plaintiff must show that he suffered
irreparable harm, that monetary damages are an inadequate remedy, that an equitable remedy is
warranted on the balance of the hardships, and that the public interest would be served by the
injunction. Id. Plaintiffs have not shown and cannot show that monetary damages are
inadequate. Indeed, assuming Plaintiffs are successful in this lawsuit, monetary relief would be
adequate, as it would compensate Plaintiffs for the amount they overpaid for a product that
cannot perform one of its functions.18 Accordingly, certification under 23(b)(2) is not
appropriate. Id.; see also Mednick, 2016 WL 3213400, at *8 (denying certification of a Rule
23(b)(2) class because the plaintiffs could not satisfy the test for a remedy in equity).
Plaintiffs—in spite of their clear class definitions which include all individuals in a
certain group of states who purchased an Oven, (R. 114 at 9–10)—appear later in their opening
brief to attempt to limit their Rule 23(b)(2) class to individuals who have not yet experienced a
self-cleaning failure, (R. 114 at 34–35). Once again Plaintiffs have proven a moving target.
18
The Court further notes that Plaintiffs entire case is premised on the idea that neither they nor Whirlpool knows
how to fix the Defect. Because of this, the Court has difficulty seeing how injunctive relief would be of much use.
51
Even if the Court were to accept their more limited class definition, Plaintiffs would violate the
principle that “class representative[s] must be part of the class and possess the same interest and
suffer the same injury as the class members.” Wal-Mart, 564 U.S. at 348–49 (quotation marks
omitted).
Consequently, the Court denies Plaintiffs’ motion for certification under Rule 23(b)(2).
D.
Certification Under 23(c)(4) Is Not Warranted
As noted above, Rule 23(c)(4) provides that “[w]hen appropriate, an action may be
brought or maintained as a class action with respect to particular issues.” The only common
issues Plaintiffs identify in their briefs for which they seek certification under 23(c)(4) are
“whether the Ovens contain a defect in that the Ovens are prone to fail when the self-cleaning
cycle is used,” “whether the defect existed at the time it left Defendant’s control” and “whether
Defendant concealed the defect from Plaintiffs and the proposed class.” (R. 114 at 34.) All of
these questions are predicated on the existence of a common defect. Accordingly, certifying
them would be inappropriate. Plaintiffs’ motion under Rule 23(c)(4) is denied.
CONCLUSION
For the foregoing reasons, the Court grants Whirlpool’s Daubert motion and denies
Plaintiffs’ motion for class certification.
DATED: May 9, 2017
ENTERED
______________________________
AMY J. ST. EVE
United States District Court Judge
52
Disclaimer: Justia Dockets & Filings provides public litigation records from the federal appellate and district courts. These filings and docket sheets should not be considered findings of fact or liability, nor do they necessarily reflect the view of Justia.
Why Is My Information Online?