Plasti Dip International, Inc. v. Rust-Oleum Brands Company
Filing
33
MEMORANDUM OPINION AND ORDER denying plaintiff's 12 Motion for Preliminary Injunction (Written Opinion). Signed by Judge John R. Tunheim on December 16, 2014. (DML)
UNITED STATES DISTRICT COURT
DISTRICT OF MINNESOTA
PLASTI DIP INTERNATIONAL INC.,
Civil No. 14-1831 (JRT/SER)
Plaintiff,
MEMORANDUM OPINION AND
ORDER DENYING MOTION FOR A
PRELIMINARY INJUNCTION
v.
RUST-OLEUM BRANDS COMPANY,
Defendant.
Kristine M. Boylan and Michael M. Sawers, BRIGGS & MORGAN, PA,
80 South Eighth Street, Suite 2200, Minneapolis, MN 55402, for plaintiff.
Raymond Rundelli and Thomas R. O’Donnell, CALFEE, HALTER &
GRISWOLD, LLP, 1405 East Sixth Street, Cleveland, OH 44114; and
Christopher A. Pinahs and Mark D. Schuman, CARLSON CASPERS, 225
South Sixth Street, Suite 4200, Minneapolis, MN 55402, for defendant.
Plaintiff Plasti-Dip International, Inc. (“Plasti Dip”) brings this action against
competitor Rust-Oleum Brands Co. (“Rust-Oleum”) for trademark infringement and
unfair competition in violation of the Lanham Act, 15 U.S.C. §§ 1114, 1119, and 11125.
Plasti Dip, manufacturer of the trademarked product PLASTI DIP, seeks a preliminary
injunction against Rust-Oleum, manufacturer of FLEXIDIP, enjoining the company from
(1) advertising, selling, and offering to sell product bearing the FLEXIDIP name online
in any forum, including through third party online retailers and (2) selling or shipping, or
in any way distributing any product bearing the product name FLEXIDIP.
The Court will deny Plasti Dip’s motion for preliminary injunction, because the
Court finds there is little likelihood of confusion between the two products.
2014F-GF
BACKGROUND
I.
THE PRODUCTS
Plasti Dip is a Minnesota corporation with its principal place of business also in
Minnesota. (Compl. ¶ 3, June 6, 2014, Docket No. 1.) Plasti Dip owns the brand name
and registered trademark PLASTI DIP. (Decl. of Laura Conley (“Conley Decl.”), Ex. 1,
Sept. 19, 2014, Docket No. 15.) Plasti Dip began selling this product under the PLASTI
DIP name in 1959.
(Compl. ¶ 5.) A trademark for PLASTI DIP was issued in 1983.
(Conley Decl. at Ex. 1)
PLASTI DIP is an “air dry plastic coating” used in projects in the home, garage, or
garden, most often to spray paint cars or car parts such as wheel rims or door handles.
(Conley Decl. at Exs. 1, 2, and 5.) The coating protects against moisture, acids, abrasion,
corrosion, and skidding/slipping, and remains flexible over time, even in cold weather
conditions. (Conley Decl. at Ex. 5.)
Rust-Oleum is a Delaware corporation with its principal place of business in
Illinois. (Compl. ¶ 4.) Rust-Oleum products have been sold in the United States since
the 1930s. (Decl. of Michael T. Murphy, at ¶ 5, Oct. 20, 2014, Docket No. 25.) RustOleum makes a wide range of protective paint and coating products and the company is
the market share leader in the United States for rust preventative, decorative, specialty
and professional segments of the small-project paint category. (Id. at ¶ 4; Decl. of Sean
Lavery, at ¶ 4, Oct. 20, 2014, Docket No. 27.) Rust-Oleum is the owner of U.S.
Trademark Application No. 86/085,498, filed on or about October 8, 2013 seeking to
-2-
register the trademark for FLEXIDIP. (Answer ¶ 8, July 29, 2014, Docket No. 9.) RustOleum began using the mark FLEXIDIP in late January 2014. (Id. at ¶ 9.) FLEXIDIP is
a rubberized coating that adheres to metal, plastic, and glass. Its recommended uses
include customizing car wheels or other automotive uses and it can be used on kitchen
utensils and other tools. (Conley Decl. at Ex. 7.)
PLASTI DIP and FLEXIDIP are sold through some of the same channels of trade,
though Rust-Oleum sells FLEXIDIP only at Home Depot. (Lavery Decl. at ¶ 24.) The
two products are sold next to each other in brick and mortar Home Depot stores where
the two products are surrounded by other Rust-Oleum products.
(Decl. of Patrick
Persons, Exs. 1–2, Sept. 19, 2014, Docket No. 16.) In addition, in online retail at Home
Depot, the two products are also shown together when a shopper searches “Plasti Dip.”
(Conley Decl. at Ex. 8.) Rust-Oleum’s product also appears in response to online search
engine results and search results online through Home Depot with searches for Plasti Dip.
(Conley Decl. at Exs. 7–10.)
II.
PROCEDURAL HISTORY
On June 6, 2014, Plasti Dip filed this action against Rust-Oleum. (Compl. at 1.)
On September 19, 2014, Plasti Dip filed this motion for preliminary injunction. (Mot. for
Prelim. Inj., at 1, Sept. 19, 2014, Docket No. 12.) Prior to this action, on March 6 2014,
Plasti Dip sent Rust-Oleum a cease and desist letter asserting that the FLEXIDIP mark
was infringing on the mark for PLASTI DIP.
(Decl. of Patricia A. Cigelnik, Ex. L,
Oct. 20, 2014, Docket No. 26.) Rust-Oleum responded on March 17, 2014 denying the
-3-
allegations. (Id. at Ex. M.) Plasti Dip then filed with the Trademark Trial and Appeal
Board a notice of opposition to Rust-Oleum’s trademark registration application for
FLEXIDIP. (Id. at Ex. N.) On May 27, Rust-Oleum filed an answer to the opposition.
(Id. at Ex. O.)
ANALYSIS
I.
STANDARD OF REVIEW
The Court considers four factors in determining whether to grant preliminary
injunctive relief: (1) the probability that the moving party will succeed on the merits;
(2) the threat of irreparable harm to the moving party; (3) the balance of harms as
between the parties; and (4) the public interest. S.J.W. ex rel. Wilson v. Lee's Summit R–
7 Sch. Dist., 696 F.3d 771, 776 (8th Cir. 2012) (citing Dataphase Sys., Inc. v. CL Sys.,
Inc., 640 F.2d 109, 113 (8th Cir. 1981) (en banc)). “At base, the question is whether the
balance of equities so favors the movant that justice requires the court to intervene to
preserve the status quo until the merits are determined.” Dataphase, 640 F.2d at 113.
The party requesting injunctive relief bears the complete burden for showing the above
factors. Watkins, Inc. v. Lewis, 346 F.3d 841, 844 (8th Cir. 2003).
II.
PLASTI DIP’S MOTION FOR PRELIMINARY INJUNCTION
A.
Likelihood of Success on the Merits
While no single Dataphase factor is determinative, the likelihood of success on
the merits is predominant in the preliminary injunction analysis. Janel Russell Designs,
Inc. v. Mendelson & Assoc., Inc., 114 F. Supp. 2d 856, 863 (D. Minn. 2000). A claim of
-4-
trademark infringement under the Lanham Act requires ownership of a valid trademark
and a likelihood of confusion between the registered mark and the alleged infringing use
by the defendant. See 15 U.S.C. § 1125(a)(1)(A); Fargo Elecs., Inc. v. Iris Ltd., Inc.,
No. 04-1017 (JRT/FLN), 2005 WL 1431653, at *5 (D. Minn. Mar. 8, 2005). There is no
dispute that Plasti Dip has a valid trademark. (Answer ¶ 6.) To determine the likelihood
of confusion, the Court looks to six factors: (1) the strength of the owner’s mark; (2) the
similarity between the mark at issue and the mark of the alleged infringer; (3) the degree
of competition between the products; (4) whether the alleged infringer intended to pass
off its goods as those of the trademark owner; (5) actual incidents of confusion; and
(6) the type of product, its cost, and conditions of purchase. Everest Capital Ltd. v.
Everest Funds Mgmt., L.L.C., 393 F.3d 755, 759–60 (8th Cir. 2005); Fargo Elecs., Inc.,
2005 WL 1431653 at *5.
1.
Strength of the Mark
A strong or distinctive trademark receives greater protection than a weak or
commonplace one. Sensient Techs. Corp. v. SensoryEffects Flavor Co., 613 F.3d 754,
763 (8th Cir. 2010) (internal quotation marks omitted). There are four categories that a
mark may fit into: “generic, descriptive, suggestive, or arbitrary or fanciful.” Id. An
arbitrary or fanciful mark is entitled to the highest level of protection, but a generic mark
is given none.
Id. at 763–64 (affirming the district court which held that the “flavors”
portion of the Sensient Technologies’ mark was too generic a term but the portion
“sensient” was fanciful). An arbitrary mark “bears no relation to the product.” J & B
-5-
Wholesale Distrib., Inc. v. Redux Beverages, LLC, 621 F. Supp. 2d 678, 684 (D. Minn.
2007). A generic term is “used by the general public to identify a category of goods, and
as such merits no trademark protection.”
See Duluth News-Tribune, a Div. of Nw.
Publ’ns, Inc. v. Mesabi Pub. Co., 84 F.3d 1093, 1096 (8th Cir. 1996).
In measuring a mark's strength, the Court looks to the distinctiveness of the mark
and the extent to which the mark is recognized by the relevant consumer class. Fargo
Elecs., Inc., 2005 WL 1431653 at *5. Plasti Dip asserts that PLASTI DIP is a wellknown brand as the product has been sold since 1959. Plasti Dip also points to several
instances in online forums where PLASTI DIP is the point of reference for discussing
comparisons. (Conley Decl. at Ex. 14.) In addition to being holder of the trademark in
the United States, Plasti Dip also holds trademarks for the product in Australia, Brazil,
Canada, Japan, Mexico, and the European Union. (Id. at Ex. 3.) Plasti Dip also has
trademark applications pending in China, South Korea, Russia, Uruguay, Chile, and
India. (Id. at Ex. 4.)
In this case, both elements of the name bear some relation to the product. In
addition, the term “dip” can be used to describe rubberized coatings and is a term of art
among enthusiasts. (Cigelnik Decl. at ¶¶ 6, 14 and Ex’s J, R.) Plasti Dip does not
provide evidence in the form of consumer surveys, or sales volume data, or evidence of
former or current advertising expenditures, to establish strength. Third party usage of
similar marks on similar goods is evidence that the mark is relatively weak and entitled
less protection. Gen. Mills, Inc. v. Kellogg Co., 824 F.2d 622, 626–27 (8th Cir. 1987).
Rust-Oleum points out other trademarks with the term “dip” and “plasti.” (Cigelnik
-6-
Decl. at Ex’s G, S1, S2, S3, and S4.) Rust-Oleum provides nine records of trademarks
with “dip” in the name for similar products. Of those products, four are expired, two are
cancelled, and one is a product of Plasti Dip. The other two trademarks are for DIP
SEAL and DURA DIP, both paint coatings with similar uses to PLASTI DIP and
FLEXIDIP. (Cigelnik Decl. at Ex. G.) Rust-Oleum also provides three examples of
trademarks including the term “plasti.” (Id. at Ex’s S1, S2, S3 and S4.) PLASTI-KOTE,
PLASTI-NAMEL, and PLASTILURE are all types of paint. (Id.)
The fact that “dip” is used throughout the car customization industry tends to
weighs against Plasti Dip. It suggests the mark is not fanciful or arbitrary. Plasti Dip has
held the trademark for PLASTI DIP for many years, but the term “dip” is commonly used
industry wide. At this stage of the case, the strength of mark factor does not weigh in
favor of either party.
2.
Similarity
In determining the similarity of two marks, the Court may consider “‘the marks'
visual, aural, and definitional attributes and compare the trade dress of the products in
determining whether the total effect conveyed by the two marks is confusingly similar.’”
Sensient Techs. Corp., 613 F.3d at 764 (quoting Luigino's, Inc. v. Stouffer Corp., 170
F.3d 827, 830 (8th Cir. 1999)).
In asserting similarity, Plasti Dip argues that (1) the middle “I” is the same in both
marks; (2) the ending “dip” is also the same; (3) each mark is a three syllable word; (4) in
each, the middle “I” is a dominant part of the mark; (5) each mark has about the same
-7-
number of characters (nine letters in one and eight in the other); and (6) the prefixes
“PLASTI” and “FLEXI” both relate to elasticity.
In countering those arguments, Rust-Oleum claims that (1) PLASTI DIP is two
words, FLEXIDIP is one; (2) they begin with different consonants; (3) FLEXIDIP is in
black and PLASTI DIP in yellow; (4) they use different fonts; (5) they use different font
sizes (the “f” and “d” are larger than the other letters and the “I” in FLEXIDIP is smaller
than the other letters whereas PLASTI DIP’s are uniform); (6) PLASTI DIP is in all
capital letters while the “I” in FLEXIDIP is lowercase; (7) the “x” in FLEXIDIP has a
downward exaggerated slant; and (8) on labels, FLEXIDIP is horizontal and PLASTI
DIP is on an angle.
Rust-Oleum also notes that prominent on each competitors’ product packaging are
their “house marks.” “Rust-Oleum” is on each FLEXIDIP and “Performix” is on the
packaging of PLASTI DIP. Rust-Oleum points to evidence from online forums cited by
Plasti Dip in which the products are identified based on these “house marks” and argues
that consumers are not confused.
Plasti Dip cites to several cases to support their claim that the names are similar,
relying on courts’ findings that phrases with the same meaning can be confusingly
similar. The cases cited, however, often use more than just similar meanings or wording
to support the outcome. For example, in Hancock v. American Steel & Wire Co. of N.J.,
203 F.2d 737, 740–41 (C.C.P.A. 1953), the U.S. Court of Customs and Patent Appeals
held that the mark “Cyclone” pictured on wire mesh fencing, and the mark “Tornado”
that was also associated with a picture of a whirlwind on wire mesh fencing, “were
-8-
identical, or substantially so, in ordinary meaning” and, if used contemporaneously would
“likely. . . result in confusion.” In S. C. Johnson & Son, Inc. v. Drop Dead Co., 210 F.
Supp. 816, 817 (S.D. Cal. 1962), aff'd, 326 F.2d 87 (9th Cir. 1963), the court decided the
mark “Promise” infringed the mark “Pledge” because of similar meanings, imitation of
the “Pledge” color scheme and contrast between letters on cans and labels, and imitation
of descriptive material copied from “Pledge’s” label. The court in Burger Chef Sys., Inc.
v. Burger Man, Inc., 492 F.2d 1398, 1398–99 (C.C.P.A. 1974), held that “Burger Man”
infringed “Burger Chef” because the two marks used similar phrases and also because the
“Burger Man” mark depicted a chef. Plasti Dip’s reliance on these cases is undermined
by the courts’ discussion of the similarity of both product names and labels in
establishing a likelihood of confusion.
“‘[I]dentical, even dominant, words in common does not automatically mean that
two marks are similar.’” Sensient Techs. Corp., 613 F.3d at 764 (quoting Gen. Mills,
Inc., 824 F.2d at 627). In Frosty Treats Inc. v. Sony Computer Entertainment America
Inc., 426 F.3d 1001, 1008–09 (8th Cir. 2005), the Eighth Circuit held that the words
“frosty treats” in the defendant's product were distinct from the plaintiff's “Frosty Treats”
mark where the mark and trade dress were different visually. The Eighth Circuit in
Luigino's, Inc. v. Stouffer Corp., explained that “Lean Cuisine” and “Lean ‘N Tasty”
were not confusingly similar because “the two marks look and sound different.” 170
F.3d at 830. The Everest Capital Ltd. court reasoned that “[t]hough each mark uses the
dominant word ‘Everest,’ that word is part of longer product names that employ different
fonts and graphics.” 393 F.3d at 761.
-9-
Taking into account the totality of the mark including aural, definitional, and
visual attributes, a risk of confusion in this case seems unlikely, at least on the record that
is now before the Court. There are significant differences in how the marks sound and in
the products’ trade dress. PLASTI DIP’s trade dress features a hand either spraying a can
of the product, or a hand holding a set of plyers that were coated with the product.
(Conley Decl. at Ex. 5.) PLASTI DIP also features prominent blue background and
yellow lettering. (Persons Decl. at Ex. 1.) FLEXIDIP pictures a tire with the wheel rim
coated in the product. (Id.) It has a white background with black lettering. (Id.) “[U]se
of different colors and typefaces, as well as the prominent display of the house marks
convey perceptible distinctions between the products.” Luigino's, Inc., 170 F.3d at 831.
The differences between these two marks appears enough to dispel confusion. The
similarity factor weighs in favor of Rust-Oleum.
3.
Degree of Competition
There is no dispute that the products in this case compete with each other directly.
When two products are in close competition, “less similarity in the trademarks is
necessary to support a finding of infringement.” ConAgra, Inc. v. George A. Hormel &
Co., 784 F. Supp. 700, 717–18 (D. Neb. 1992), aff'd, 990 F.2d 368 (8th Cir. 1993)
(quoting SquirtCo. v. Seven-Up Co., 628 F.2d 1086, 1091 (8th Cir. 1980). This factor
weighs in favor of Plasti Dip.
- 10 -
4.
Intent To Pass Off FLEXIDIP as PLASTI DIP
The Eighth Circuit has formed that “[i]ntent on the part of the alleged infringer to
pass off its goods as the product of another raises an inference of likelihood of confusion,
but intent is not an element of a claim for trademark infringement.” SquirtCo. 628 F.2d
at 1091. The alleged infringer’s intent is just a part of the analysis in determining
whether consumer confusion is likely. Rust-Oleum did know of Plasti Dip and did intend
to compete. Yet, “[k]nowledge of another's product and an intent to compete with that
product is not . . . equivalent to an intent by a new entrant to a market to mislead and to
cause consumer confusion.” Sensient Techs. Corp., 613 F.3d at 766 (internal quotation
marks omitted). In General Mills, Inc., the Eighth Circuit did not find a plan to pass off
its goods as those of a competitor on the part of “Oatmeal Raisin Crisp” despite the
owner's intent to compete with the “Apple Raisin Crisp” mark. Gen. Mills, Inc., 824 F.2d
at 627. Rust-Oleum claims that they have a large product base and therefore they do not
need to thrive off the goodwill of another mark. Plasti Dip relies on an inference that
their long history in this market and the similarity of the marks establishes intent. But,
speculation is not enough to establish intent. Sensient Techs. Corp., 613 F.3d at 767.
This factor weighs in favor of Rust-Oleum.
5.
Actual Incidents of Confusion
Evidence of actual confusion is “positive proof” of a likelihood of confusion, but it
is not essential to a finding of trademark infringement. SquirtCo, 628 F.2d at 1091.
Plasti Dip has submitted several online forums and discussions discussing the difference
- 11 -
between PLASTI DIP and FLEXIDIP. (Conley Decl. at Ex’s 12–14.) The parties
specifically address a blog comment stating “[f]or all we know Plasti-Dip is making this
for everyone and brand labeling it for all of the other brands. Makes more sense to do it
that way instead of reinventing the wheel.” (Id. at Ex. 11.) Rust-Oleum maintains that
there have been no instances of actual confusion throughout eight months of head-to-head
competition. Rust-Oleum claims that the quote discussed is not actual evidence, but is
mere speculation about the possibility of confusion. “Even several isolated incidents of
actual confusion” are not enough to establish a likelihood of confusion, rather courts
should look to “whether an appreciable number of ordinary purchasers are likely to be so
misled.” Sensient Techs. Corp., 613 F.3d at 768 (internal quotation marks omitted).
Given that the evidence of actual confusion at this stage of the case is weak, this factor
weighs in favor of Rust-Oleum.
6.
Type of Product, Cost, and Conditions of Purchase
“[I]n a trademark infringement action the kind of product, its cost and the
conditions of purchase are important factors in considering whether the degree of care
exercised by the purchaser can eliminate the likelihood of confusion which would
otherwise exist.” SquirtCo., 628 F.2d at 1091 (internal quotation marks omitted). The
products in this case are low cost, appear alongside each other both online and in Home
Depot stores, and are sometimes offered at the same price. (Persons Decl. at Ex 1–2.)
Yet, the two products have very different trade dress that in the Court’s view diminishes
the risk of confusion. In addition to the product names, each product displays their
- 12 -
“house” marks. Finally, given that these products are used in automobile customization,
those who purchase the product likely put considerable care and thought into deciding
what product to purchase before using the product on an expensive car. Those consumers
are “enthusiasts” for dip products, which is evidenced by some of the websites discussing
dipping.
This factor weighs in favor of Rust-Oleum.
Viewing each of the above
discussed factors in totality, the Court finds that although there is clearly a possibility of
consumer confusion, the record in the case does not demonstrate that it is strong enough
to constitute a “substantial likelihood” of confusion. Plasti Dip has not established a
likelihood of success on the merits.
B.
Threat of Irreparable Harm
To succeed in demonstrating a threat of irreparable harm, “a party must show that
the harm is certain and great and of such imminence that there is a clear and present need
for equitable relief.”
Roudachevski v. All-Am. Care Ctrs., Inc., 648 F.3d 701, 706
(8th Cir. 2011) (internal quotation marks omitted). Irreparable harm can involve loss of
trade, reputation, and good will that “‘no final decree of a court can adequately
compensate.’” Aveda Corp. v. Evita Mktg., Inc., 706 F. Supp. 1419, 1431 (D. Minn.
1989) (quoting Carling Brewing Co. v. Philip Morris, Inc., 277 F. Supp. 326 (N.D. Ga.
1967)). Plasti Dip asserts that there is a presumption of irreparable harm because they
have shown a likelihood of confusion. Rust-Oleum argues that the Supreme Court case
eBay, Inc. v. MercExchange, L.L.C., 547 U.S. 388, 391–92 (2006), establishes that a
presumption of irreparable harm is no longer permissible simply because a likelihood of
- 13 -
confusion is established. The Third and Ninth Circuits have extended this ruling, which
concerned patents, to trademark cases as well.1 Ferring Pharmaceuticals, Inc. v. Watson
Pharmaceuticals, Inc., 765 F.3d 205, 206 (3rd Cir. 2014); Herb Reed Enters. v. Fla.
Entm’t Mgmt., 736 F.3d 1239, 1249–51 (9th Cir. 2013) (cert. denied, 2014 WL 1575656
(2014)).
Plasti Dip also argues that even absent a presumption, irreparable harm results
because FLEXIDIP detracts from the value of PLASTI DIP and damages the goodwill
and prominence of the PLASTI DIP mark. Bishops Bay Founders Grp., Inc. v. Bishops
Bay Apartments, LLC, 301 F. Supp. 2d 901, 913 (W.D. Wis. 2003) (holding that “damage
to the good will and prominence of plaintiff's mark through public confusion is an
irreparable injury”). Rust-Oleum notes that these cases came before the eBay ruling and
argues that Plasti Dip has not put forth any evidence about how its product would be
damaged in these ways. Rest-Oleum argues that Plasti Dip is asking the Court to infer
harm without actual evidence of harm.
There is a possibility that the goodwill that Plasti Dip has developed over fifty
years of selling PLASTI DIP could be damaged. Yet, a showing of irreparable harm
must involve more than the possibility of harm. Shade's Landing, Inc. v. Williams, 76
F. Supp. 2d 983, 991–92 (D. Minn. 1999). Plasti Dip’s claim of injury to goodwill is, at
this stage of the case, speculation and speculation is not enough to show irreparable
1
The Court finds the analysis in these cases persuasive, but in this case it is unnecessary
to reach a conclusion on the issue of the extension of eBay to trademark cases.
- 14 -
harm.2 See e.g., Gen. Motors Corp. v. Harry Brown's, LLC, 590 F. Supp. 2d 1134, 1138–
39 (D. Minn. 2008) aff'd, 563 F.3d 312 (8th Cir. 2009).
C.
Balancing Harm with Injury to Non-Moving Party
When considering a motion for preliminary injunction, Courts must consider the
potential for injury to the defendant if the injunction is granted. Dataphase Sys., 640
F.2d at 113.
When the plaintiff “has made a substantial investment developing its
trademark relative to the nonmoving party's investment in the allegedly infringing mark,
the courts generally find that the moving party's hardship outweighs that of the
nonmoving party.” Aveda Corp., 706 F. Supp. at 1431. PLASTI DIP has been sold for
over fifty years and is sold worldwide. Rust-Oleum has just recently begun selling the
product FLEXIDIP in the last year. Plasti Dip argues that its request for injunction is not
excessively harmful to Rust-Oleum because it is not a national store level recall, but is
rather a pull-back of on-shelf inventory which would include enjoining Rust-Oleum from
advertising, selling, and offering FLEXIDIP online and from selling, shipping, or
distributing FLEXIDIP. Plasti Dip argues that the injunction would not shut down RustOleum as they are a large business with several other product lines.
Rust-Oleum counters that the preliminary injunction request would force RustOleum to adopt a new mark for the product or stop selling the product completely. This
would lead to additional costs and would affect sales. The costs would stem from
creating a new mark acceptable to its chief retailer, Home Depot and from re-designing
2
A court may deny a preliminary injunction strictly on the grounds that the movant did
not show a threat of irreparable harm. Watkins Inc., 346 F.3d at 844.
- 15 -
promotional materials and products. In addition the requested relief would affect Home
Depot, a third party, and Rust-Oleum’s relationship with Home Depot as it would have to
accept returns of the product from Home Depot or find a way to re-label the product.
While both parties offer little evidence regarding their respective costs, Rust-Oleum
offers concrete examples of where costs would accrue. The injuries to Rust-Oleum
including costs to re-label and costs to the relationship with Home Depot appear to
outweigh the potential injuries to Plasti Dip due to their investment in their mark. In
addition, if FLEXIDIP is later found to intrigue Plasti Dip’s trademark, Rust-Oleum is
likely able to pay damages.
D.
Public Interest
Although infringement of trademarks and unfair competition is inherently contrary
to the public interest, see, e.g., Am. Dairy Queen Corp. v. New Line Prods., Inc., 35
F. Supp. 2d 727, 733 (D. Minn. 1998), where the likelihood of success on the claim is not
overwhelming, the weight of the public interest factor is correspondingly reduced.
Fargo Elecs., Inc., 2005 WL 1431653, at *8. As the probability that consumers will be
confused or deceived in this case is not significant, the Court concludes that the policies
underlying the Lanham Act would not be served by granting a preliminary injunction in
this case.
While the products are in direct competition, that reality alone does not
overwhelm the fact that Plasti Dip has not met its burden, at least at this early stage of the
case. Therefore, the Court will deny the motion for preliminary injunction.
- 16 -
ORDER
Based on the foregoing, and all the files, records, and proceedings herein, IT IS
HEREBY ORDERED that Plaintiff's Motion for preliminary injunction [Docket No. 12]
is DENIED.
DATED: December 16, 2014
at Minneapolis, Minnesota.
____s/
____
JOHN R. TUNHEIM
United States District Judge
- 17 -
Disclaimer: Justia Dockets & Filings provides public litigation records from the federal appellate and district courts. These filings and docket sheets should not be considered findings of fact or liability, nor do they necessarily reflect the view of Justia.
Why Is My Information Online?