Flow Valve LLC v Forum Energy Technologies Inc et al
Filing
62
ORDER denying 54 Motion to Dismiss, as more fully set out. Signed by Honorable Stephen P. Friot on 7/18/14. (jw)
IN THE UNITED STATES DISTRICT COURT FOR THE
WESTERN DISTRICT OF OKLAHOMA
FLOW VALVE, LLC, an Oklahoma
limited liability company,
)
)
)
Plaintiff,
)
)
vs.
)
)
FORUM ENERGY TECHNOLOGIES, )
INC., a Delaware corporation, et al.,
)
)
Defendants.
)
Case No. CIV-13-1261-F
ORDER
Defendant Buddy Wood’s motion to dismiss plaintiff Flow Valve, LLC’s First
Amended Complaint under Rule 12(b)(6), Fed. R. Civ. P., is before the court. Doc.
no. 54. The First Amended Complaint, doc. no. 36 (the complaint), alleges patent
infringement (count one), and violation of Oklahoma’s Uniform Trade Secrets Act
(count two). Mr. Wood is named as a defendant on both claims, and his motion
challenges both claims. The briefing is complete.
Standards
The inquiry under Rule 12(b)(6) is whether the complaint contains enough facts
to state a claim for relief that is plausible on its face. Ridge at Red Hawk, L.L.C. v.
Schneider, 493 F.3d 1174, 1177 (10th Cir., 2007), quoting Bell Atlantic Corp. v.
Twombly, 550 U.S. 544, 547 (2007). To survive a motion to dismiss, a plaintiff must
nudge his claims across the line from conceivable to plausible. Id. The mere
metaphysical possibility that some plaintiff could prove some set of facts in support
of the pleaded claims is insufficient; the complaint must give the court reason to
believe that this plaintiff has a reasonable likelihood of mustering factual support for
these claims. Ridge at Red Hawk, 493 F.3d at 1177. In conducting its review, the
court assumes the truth of the plaintiff’s well-pleaded factual allegations and views
them in the light most favorable to the plaintiff. Id. Pleadings that are no more than
legal conclusions are not entitled to the assumption of truth; while legal conclusions
can provide the framework of a complaint, they must be supported by factual
allegations. Ashcroft v. Iqbal, 556 U.S.662, 664 (2009). When there are well-pleaded
factual allegations, a court should assume their veracity and then determine whether
they plausibly give rise to an entitlement to relief. Id.
Flow Valve’s response to the motion to dismiss includes an affidavit. Doc. no.
56-1. However, in considering this 12(b)(6) motion, the court does not rely on any
matters extraneous to the complaint. See, Christensen v. Big Horn County Board of
County Commissioners, 374 Fed. Appx. 821 (10th Cir. 2010) (fact that court received
outside materials does not convert 12(b)(6) motion to summary judgment motion,
unless the district court relied on this material in rendering its decision). The court
declines to convert the motion to one for summary judgment. Accordingly, matters
outside the pleadings, such as the affidavit, have not been considered in evaluating
dismissal.
Misappropriation of Trade Secrets Claim
Mr. Wood’s first argument is that the trade secret misappropriation claim
alleged against him fails because it is time-barred on its face under a three-year statute
of limitations. Mr. Wood relies on the following allegations. The complaint alleges
that Mr. Wood “absconded with” physical manifestations of plaintiff’s protected trade
-2-
secrets; that Mr. Wood left his business association with plaintiff Flow Valve the fall
of 2008; that Mr. Wood disclosed plaintiff’s trade secret information to plaintiff’s
detriment “in order to enhance Wood’s compensation in FET’s [Forum Energy
Technologies, Inc.’s] purchase of WFP [Wood Flowline Products, LLC]”; and that
the referenced purchase of WFP occurred in February of 2011. Mr. Wood argues that
he was added as a defendant to this action in April of 2014, which is more than three
years after he allegedly absconded with the trade secrets, presumably when he left his
business association with plaintiff Flow Valve in 2008, and which is also more than
three years after he allegedly disclosed misappropriated trade secrets in 2001 in
conjunction with FET’s purchase of WFP.
Title 78 O.S. 2011 § 91 provides that “An action for misappropriation must be
brought within three (3) years after the misappropriation is discovered or by the
exercise of reasonable diligence should have been discovered.” The complaint states
nothing about when the misappropriation was discovered by plaintiff Flow Valve.
Accordingly, contrary to Mr. Wood’s contention, the complaint is not time-barred on
its face.
Mr. Wood further argues that to avoid dismissal plaintiff Flow Valve must
plead facts showing when it discovered the alleged misappropriation, and must also
plead facts showing that it exercised reasonable diligence in making that discovery.
The argued-for standard would require Flow Valve to anticipate and negate the
affirmative defense of limitations. As stated in 5B Wright & Miller, Federal Practice
and Procedure: Civil 3d §1357 at n.68, a court may, in its discretion, decide that a
motion for summary judgment is a more appropriate procedural device than a motion
-3-
to dismiss for dealing with an affirmative defense. That is the case here, where
evidence will benefit the court in determining whether the claim is time-barred.
Based on the foregoing, the court rejects Mr. Wood’s argument that the trade
secret misappropriation claim should be dismissed based on limitations.
Mr. Wood next argues that the complaint fails to allege a plausible claim of
trade secret misappropriate for various reasons including but not limited to: failure
to adequately describe the nature of the trade secrets; failure to plausibly allege
circumstances showing the trade secrets have been subject to reasonable efforts to
maintain their secrecy; failure to adequately explain the policies referred to in the
complaint as “policies regarding the secrecy of Plaintiff’s protected trade secrets”;
failure to allege facts supporting the relevant elements of misappropriation under the
statute, such as acquiring knowledge of the trade secret by improper means, and
knowledge at the time of the disclosure or use that the knowledge of the trade secret
was acquired under circumstances giving rise to a duty to maintain its secrecy; failure
to identify circumstances which would have created a duty on the part of Mr. Wood
to maintain the secrecy of the alleged trade secrets; and failure to adequately
differentiate among the defendants with respect to the trade secret claims (i.e.,
engaging in “group pleading”).
Despite these various arguments which would appear to assert that a relatively
detailed complaint is necessary, Mr. Wood’s moving brief states as follows: “In order
to state a plausible claim for relief under the Uniform Trade Secrets Act, Flow Valve
must adequately plead that (1) it has a protectable trade secret and (2) that the trade
secret has been appropriated.” Doc. no. 55, p. 6, citing All Business Solutions, Inc.
v. NationsLine, Inc., 629 F. Supp. 2d 553, 558 (W.D. Va. 2009) (explaining that to
-4-
state a claim under the Virginia Uniform Trade Secrets Act, plaintiff must allege
sufficient facts to establish these elements).
The complaint meets these requirements, argued for by Mr. Wood. As to the
first prong of the test, the complaint alleges that Mr. Wood was aware of the ‘213
patent technology, and was aware of Flow Valve’s use of the ‘213 patent technology
as Flow Valve’s protected trade secrets while the defendants enjoyed contractual
relations with plaintiff Flow Valve. Doc. no. 36, ¶ 16. Immediately after this
allegation, ¶ 17 of the complaint alleges that the now former business associates of
plaintiff, “including Defendant Wood,” absconded with physical manifestations of
plaintiff’s trade secrets, including specifications, and samples. As to the second
prong, the complaint gives at least some specifics of the alleged misappropriation. For
example, plaintiff alleges that the former business associates of plaintiff “including
Defendant Wood, disclosed the misappropriated trade secrets to at least Shaw
Machine and Gonzales Machining for the purpose of manufacturing parts for
Defendant FET in direct competition against Plaintiff.” Id., ¶ 18.
The court has reviewed all of the arguments for dismissal stated in this portion
of Mr. Wood’s brief. Having done so, it finds none of them persuasive. It is not
necessary to separately discuss each of these rejected arguments. However, the court
separately addresses Mr. Wood’s argument that the misappropriation claim is
insufficient because it engages in “group pleading.” (It does so because that argument
comes up again in the context of the motion to dismiss the patent infringement claim.)
In this case, the alleged relationship among the defendants makes it understandable
that claims would be linked by common allegations. The complaint makes specific
references to conduct by Mr. Wood. And the claims involved in this action are
-5-
relatively straightforward, involving only three defendants. In these circumstances,
the purported “group pleading” is not a deficiency with respect to the
misappropriation claim.
The misappropriation claim will not be dismissed.
Patent Infringement Claim
Mr. Wood argues that the patent infringement claim fails to satisfy the pleading
requirements of Form 18, found in the Appendix of Forms to the Federal Rules of
Civil
Procedure.
Form
18
provides
the
pleading
standard.
K-Tech
Telecommunications, Inc. v. Time Warner Cable, Inc., 714 F.3d 1277, 1284 (Fed. Cir.
2013), citing Superior Industries, LLC v. Thor Global Enterprises Ltd., 700 F.3d
1287, 1295 (Fed. Cir. 2012). In a case involving a direct patent infringement claim,
the Federal Circuit has stated that Form 18 requires the following: (1) an allegation
of jurisdiction; (2) a statement that the plaintiff owns the patent; (3) a statement that
defendant has been infringing the patent by making, selling, and using the device
embodying the patent; (4) a statement that the plaintiff has given the defendant notice
of its infringement; and (5) a demand for an injunction and damages. K-Tech, 714
F.3d at 1283. Mr. Wood argues that the complaint fails to identify the alleged
infringing device as required by the third prong of the test. Mr. Wood also argues that
the complaint fails to plead notice under 35 U.S.C. § 287 as required by the fourth
prong of the test.
As for identification of the alleged infringing device, a plaintiff is not required
to point to the specific device or product which allegedly infringes plaintiff’s patent.
Id. at 1286. This is especially true when the operation of the allegedly infringing
systems (or device) is not ascertainable without discovery. Id. A defendant cannot
-6-
shield itself from a complaint for direct infringement by operating in such secrecy that
the filing of a complaint itself is impossible. Id. Moreover, the touchstones of an
appropriate analysis under Form 18 are notice and facial plausibility. Id. While these
requirements serve as a bar against frivolous pleading, it is not an extraordinarily high
bar. Id. The adequacy of the facts pled depends on the breadth and complexity of
both the asserted patent and the accused product or system, and on the nature of the
defendant’s business activities. Id. The required level of detail of the description is
dictated by the facts and circumstances of the action; identification of a general
category of products as well as specific features is sufficient to satisfy Form 18. Id.
at 1286-87, citations omitted.
The complaint alleges that the ‘213 patent “relates to technology used by
Plaintiff to secure and hold pieces of bent tubing, while the pieces are machined. The
pieces thus manufactured by this technology are ultimately assembled into finished
products and are sold for use in the oil and gas well completion and production
business.” Doc. no. 36, ¶ 12. The complaint alleges that Mr. Wood was aware of
plaintiff’s use of the ‘213 patent technology as trade secrets, id. at ¶ 16; that Mr.
Wood “absconded with physical manifestations of Plaintiff’s protected trade secrets,
including specifications and samples....” id. at ¶ 17; and that Mr. Wood infringed the
‘213 patent “by making the patented invention several times and then using that
patented invention to manufacture products....” Id. at ¶ 21. Accordingly, plaintiff
Flow Valve has alleged that its invention is a device to secure and hold pieces of bent
tubing while the pieces of tubing are being machined; that pieces thus manufactured
are assembled into finished products sold for use in the oil and gas well completion
and production business; and that Mr. wood infringed the patent by making the
-7-
patented invention and using that patented invention to manufacture products. In
addition, plaintiff Flow Valve argues that it cannot be more specific at this stage,
without full access to defendants’ devices.
The allegations provide sufficient
identification of the alleged infringing device.
Mr. Wood’s other form-based argument (the fourth prong of the test) is that the
complaint does not satisfy the marking and notice requirements of Form 18. This
requirement is derived from 35 U.S.C. § 287, entitled “Limitation on damages and
other remedies; marking and notice.” Subsection (a) of § 287 provides that
“Patentees, and persons making, offering for sale, or selling ... any patented
article...may give notice to the public that the same is patented, either by fixing
thereon the word ‘patent’ or the abbreviation ‘pat.’...” Section 287(a) further provides
that “In the event of failure so to mark, no damages shall be recovered by the patentee
in any action for infringement, except on proof that the infringer was notified of the
infringement and continued to infringe thereafter, in which event damages may be
recovered only for infringement occurring after such notice. Filing of an action for
infringement shall constitute such notice.” Thus, where there has been a failure to
mark, § 287(a) limits damages for infringement to damages after notice of the
infringement, and further provides that filing an action for infringement shall
constitute such notice.
This action seeks not only damages, but an injunction as well. Accordingly,
even if a failure to mark under § 287(a) operates to limit damages (an issue the court
does not reach), that finding would not result in dismissal of the entire patent
infringement claim. As for notice of the infringement, § 287(a) provides that where
a device has not been marked, damages are not recoverable prior to the giving of
-8-
notice of the infringement, and that the filing of an action constitutes notice. An
action has been filed against Mr. Wood. Thus, even if notice of infringement was not
given earlier (an issue the court does not reach), such a fact, if proven, would not
require dismissal of the entire patent infringement claim.
The patent infringement claim against Mr. Wood will not be dismissed for
failure to comply with requirements of Form 18.
Mr. Wood next argues that the patent infringement claim should be dismissed
because it fails to provide Mr. Wood with adequate notice of the nature of this claim
under the requirements of Iqbal and Twombly.
In this portion of his moving brief, Mr. Wood argues that the complaint invokes
“group pleading” because it does not set forth which defendants were allegedly doing
what.
As previously stated, the complaint alleges a relationship among the
defendants; describes conduct of Mr. Wood, in particular; and this action alleges
claims which are relatively straightforward and which are asserted against three
defendants. In these circumstances, “group pleading” does not require dismissal of
the patent claim.
Mr. Wood also argues that the complaint fails to adequately allege how the ‘213
patent is being infringed. Among other things, Mr. Wood complains that the
complaint alleges defendants infringed the patent “both literally and by the doctrine
of equivalents.” He complains that use of the word “both” in this allegation (as
opposed to “either or,” or “and/or,” which Mr. Wood contends would have been
preferable) is confusing and fails to give adequate notice of the nature of the patent
infringement claim. Litigants are not held to the standards of The Elements of Style.
Regardless, “both” means “both,” and the term is not unnecessarily confusing.
-9-
Mr. Wood also complains that the complaint fails to indicate when the
defendants allegedly infringed the ‘213 patent. Mr. Wood argues that the patent
infringement claim is not plausible because dates alleged in the complaint show that
the patent did not issue until July 10, 2012, doc. no. 36, ¶ 12, which was after Mr.
Wood allegedly left his association with Flow Valve. In support of the argument that
this sequence of events requires dismissal, Mr. Wood cites Welker Bearing Co. v.
PHD, Inc., 550 F.3d 1090, 1095 (Fed. Cir. 2008), for the proposition that “The
patentee may of course obtain damages only for acts of infringement after the issuance
of the patent.” Doc. no. 59, p. 8. Welker relates to damages and makes the statement
quoted by Mr. Wood at the summary judgment stage. Welker does not stand for the
proposition that a patent infringement claim which seeks both injunctive relief and
damages should be dismissed if the pleadings reveal that the patent issued after certain
conduct by the plaintiff. Moreover, the complaint alleges that Mr. Wood was aware
of the pending patent application, and that he directed activity which led to the alleged
infringement. Doc. no. 36, ¶¶ 16, 23. In these circumstances, it would be premature
to dismiss the patent infringement claim based on the alleged fact that Mr. Wood left
his association with plaintiff Flow Valve prior to the date the patent issued.
Mr. Wood also argues that facts are not alleged to support a claim of willful
infringement, citing In re Seagate Technology, LLC, 497 F.3d 1360, 1371 (Fed. Cir.
2007). Seagate discusses proof of willfulness in the context of a dispute regarding the
proper scope of discovery. Id. at 1371. Seagate did not involve the sufficiency of
pleadings. Regardless, willfulness (like other subjects which Mr. Wood complains are
not addressed in the complaint) is more appropriately determined at a later stage, with
the benefit of a more fully developed record.
-10-
Whether or not specifically addressed in this order, the court has considered,
and has rejected, all of Mr. Wood’s arguments for dismissal of the patent claim.
Ruling
After careful consideration, the motion to dismiss is DENIED.
Dated this 18th day of July, 2014.
13-1261p009.rev.wpd
-11-
Disclaimer: Justia Dockets & Filings provides public litigation records from the federal appellate and district courts. These filings and docket sheets should not be considered findings of fact or liability, nor do they necessarily reflect the view of Justia.
Why Is My Information Online?