Uniloc USA, Inc. et al v. NATIONAL INSTRUMENTS CORP. et al

Filing 200

MOTION for Protective Order by Uniloc Singapore Private Limited, Uniloc USA, Inc.. (Attachments: # 1 Exhibit A, # 2 Exhibit B, # 3 Exhibit C, # 4 Exhibit D, # 5 Text of Proposed Order)(Nelson, Edward)

Exhibit “D”

IN THE UNITED STATES DISTRICT COURT
FOR THE EASTERN DISTRICT OF TEXAS
TYLER DIVISION
UNILOC USA, INC., ET AL.
Plaintiffs,
vs.
NATIONAL INSTRUMENTS CORP., ET
AL.
Defendants.

CASE NO. 6:10-CV-472
PATENT CASE

UNILOC USA, INC., ET AL.
Plaintiffs,
CASE NO. 6:10-CV-591
PATENT CASE

vs.
ENGRASP, INC., ET AL.
Defendants.

UNILOC USA, INC., ET AL.
Plaintiffs,
CASE NO. 6:10-CV-636
PATENT CASE

vs.
BMC SOFTWARE, INC., ET AL.
Defendants.

AGREMENT TO PROTECT SOURCE CODE
The parties1 agree that certain information subject to discovery in this action may contain

1

The parties to this Agreement are the Plaintiffs and the following Defendants: Adobe
Inc., BMC Software, Inc., Freedom Scientific Inc. and Freedom Scientific Ltd., National
(footnote continued)
-1-

trade secrets or other confidential, proprietary and/or commercially sensitive information. In the
interest of protecting that information and permitting discovery to proceed without delay
occasioned by disputes regarding such information, the parties agree to the protective provisions
set forth below. The parties expect that a Protective Order will be submitted to the Court in due
course, but the parties do not wish to delay source code review by Uniloc’s expert until that
Protective Order is entered. Thus, the parties further stipulate that this Agreement may be
enforced as to the same extent as a Protective Order issued by the Court.
Scope and Definitions
1.

This Agreement To Protect Source Code applies to all information, documents,

testimony and/or things discovered in this action which contain non-public, confidential
information and/or trade secrets, as well as any secondary material, such as pleadings, written
discovery, expert reports, notes, summaries or any other materials that contain, describe or
reflect such information (collectively, “Protected Material”).
2.

“Producing Party” shall refer to any person that discloses, testifies regarding,

produces or makes available for inspection any Protected Material. A Producing Party may be a
party to this action or a non-party, and may disclose Protected Material either voluntarily or
involuntarily.
3.

“Receiving Party” shall refer to any party to this action which receives Protected

Material under this Agreement, and to any other entity or person authorized to receive Protected
Material under Paragraph 13 (CONFIDENTIAL Material), Paragraph 14 (CONFIDENTIAL OUTSIDE ATTORNEYS EYES ONLY Material), and Paragraphs 15 and 20 (“SOURCE CODE
– OUTSIDE ATTORNEYS EYES ONLY – RESTRICTED CONFIDENTIAL” Material).

Instruments, Inc., Pinnacle Systems, Inc., SafeNet, Inc. and Aladdin Systems, Inc. and Aladdin
Systems, Ltd., and Oynx Graphics, Inc.
-2-

4.

“Party” means any party to this case, including all of its officers, directors,

employees, consultants, retained experts, and outside counsel and their support staffs.
5.

“Source Code” means computer code, scripts, assembly, object code, source code

listings and descriptions of source code, object code listings and descriptions of object code, and
Hardware Description Language (HDL) or Register Transfer Level (RTL) files that describe the
hardware design of any ASIC or other chip disclosed by a Producing Party.
6.

“Outside Counsel” means (i) outside counsel who appear on the pleadings as

counsel for a Party, (ii) partners and associates of such counsel to whom it is reasonably
necessary to disclose the information for this litigation, and (iii) outside, independent attorneys
contracted to provide legal advice to a Party in connection with this litigation, who have
qualified under Paragraphs 16, 18 and 19 of this Agreement. Outside counsel may not be an
officer, director, or managing agent of a Party or of a competitor of a Party and may not be
involved in competitive decision-making, as defined by U.S. Steel v. United States, 730 F.2d
1465, 1468 n.3 (Fed. Cir. 1984), on behalf of a Party or a competitor of a Party.
7.

To the extent that any discovery is taken of persons not Parties to this action

(“Third Parties”) and if such Third Parties contend the discovery sought involves trade secrets,
confidential business information, or other proprietary information, then such Third Parties may
agree to be bound by this Agreement.
8.

A Producing Party may designate Protected Material as:
a.

“CONFIDENTIAL” if it contains information not readily available to the public
and which the Producing Party would not reveal to others except in confidence; or

b.

“CONFIDENTIAL - OUTSIDE ATTORNEYS EYES ONLY” if it

-3-

i.

contains or describes non-public technical, financial, or other trade secrets
or commercially sensitive information, including without limitation pricing,
customer lists, business or marketing plans, or

ii.

is subject to an express obligation of confidentiality owed by the Producing
Party to a third party which prevents its disclosure otherwise; or

iii.

license agreements to the extent they do not involve settlements or licenses
related to the patents asserted in this litigation (unless expressly requiring a
higher level of confidentiality, settlement agreements and licenses
involving the patents asserted in this litigation may be marked
“CONFIDENTIAL” and may be accessed by in-house counsel of the
parties as provided below);

c.

“SOURCE CODE – OUTSIDE ATTORNEYS EYES ONLY – RESTRICTED
CONFIDENTIAL” for the source code produced by a Producing Party. Source
code shall be subject to the additional restrictions and protections provided below.

9.

To the extent that any one of Defendants in this litigation produces Protected

Material under the terms of this Agreement to Protect Source Code to Plaintiff, Plaintiff shall not
share that material with the other Defendants in this litigation, absent express written permission
from the producing Defendant. This Agreement does not confer any right to any one Defendant
to access the Protected Material of any other Defendant.
Permitted Use of Protected Material
10.

Protected Material shall not be distributed, disclosed or made available to anyone

except as expressly provided in this Agreement.

-4-

11.

Protected Material shall be used solely for this litigation, and shall not be used for

any other purpose, including without limitation any other litigation, or acquisition, or any
business or competitive purpose or function of any kind.
12.

No Defendant is required to produce its Protected Material to any other Defendant

or Defendants, but nothing in this Agreement shall preclude such production. Notwithstanding
the provisions of this Agreement To Protect Source Code, and with the exception of service
copies pursuant to Paragraph 9, Plaintiff shall not disclose one Defendant’s Protected Material to
any other Defendant or Defendants through Court filings, oral argument in Court, expert reports,
deposition, discovery requests, discovery responses, or any other means, without the express
prior written consent of the Defendant that produced the Protected Material.
Permitted Disclosure and Persons Who May Access Protected Material
13.

A Receiving Party may disclose Protected Material designated

“CONFIDENTIAL” only to the following:
a.

Any Persons authorized to receive “CONFIDENTIAL - OUTSIDE
ATTORNEYS EYES ONLY” material as specified in Paragraph 14 below;

b.

Up to five (5) employees or officers of the Receiving Party provided, however,
that each employee and/or officer agrees to be bound by the provisions of this
Agreement To Protect Source Code and signs the undertaking set forth in Exhibit
A prior to receipt of the Protected Material; and

c.

In-house counsel of the Receiving Party to which disclosure is reasonably
necessary for this litigation provided, however, that such in-house counsel may
not be may not be involved in competitive decision-making, as defined by U.S.
Steel v. United States, 730 F.2d 1465, 1468 n.3 (Fed. Cir. 1984), on behalf of a
Party
-5-

14.

A Receiving Party may disclose materials designated “CONFIDENTIAL -

OUTSIDE ATTORNEYS EYES ONLY” material only to the following:
a.

The Court, its technical advisor and/or mediator, court personnel, the jury, court
reporters and/or videographers who record testimony or other proceedings in this
action;

b.

Outside Counsel for the Receiving Party (including the non-attorney employees of
their respective law firms under Outside Counsel’s control);

c.

Persons who appear on the face of the Protected Material as an author, addressee
or recipient, or as the original source of the information contained therein.
Persons authorized to view Protected Material only under this subparagraph shall
not retain copies of the Protected Material;

d.

Outside experts and consultants of the Receiving Party, subject to Paragraphs 1719, and their support staff and clerical employees assisting in the litigation,
provided that any such persons may not be a current officer, director, or employee
of a Party or of a competitor of a Party and may not be involved in competitive
decision-making, as defined by U.S. Steel v. United States, 730 F.2d 1465, 1468
n.3 (Fed. Cir. 1984), on behalf of a Party or a competitor of a Party;

e.

Professional litigation support vendors, including but not limited to copy,
graphics, translation, database and/or trial support and/or trial consulting services;
and

f.

While testifying at deposition or trial in this action only:
i.

any current or former officer, director or employee of the Producing Party
or the original source of the information;

-6-

ii.

any person designated by the Producing Party to provide testimony under
Rule 30(b)(6) of the Federal Rules of Civil Procedure where the category or
categories of designation reasonably relate to the subject matter of the
Protected Materials to be disclosed;

iii.

any person who authored, previously received or was likely accorded
access to such Protected Material, as evident from its face or reasonably
certain in view of other evidence; and

g.

Any mediator who is assigned to hear this matter, and his or her staff, subject to
their agreement to maintain confidentiality to the same degree as required by this
Agreement To Protect Source Code.

h.

Any other person with the prior written consent of the Producing Party.

i.

In addition, a Party may disclose arguments and materials derived from Protected
Material designated “CONFIDENTIAL - OUTSIDE ATTORNEYS EYES
ONLY” to mock jurors who have signed Exhibit A. A Party may not disclose to
mock jurors any original, as-produced materials or information (including, for
example, documents, deposition testimony, or interrogatory responses) produced
by another Party designated as “CONFIDENTIAL - OUTSIDE ATTORNEYS
EYES ONLY”.

15.

A Receiving Party may disclose materials designated “SOURCE CODE –

OUTSIDE ATTORNEYS EYES ONLY – RESTRICTED CONFIDENTIAL” only to the
following:
a.

The Court, its technical advisor and/or mediator, court personnel, the jury, court
reporters and/or videographers who record testimony or other proceedings in this
action.
-7-

b.

Outside Counsel for the Receiving Party (including the non-attorney employees of
their respective law firms under outside counsel’s control), except that, unless
otherwise agreed, no Outside Counsel who is involved in competitive decisionmaking, as defined by U.S. Steel v. United States, 730 F.2d 1465, 1468 n.3 (Fed.
Cir. 1984), shall have access to Protected Material designated as “SOURCE
CODE – OUTSIDE ATTORNEYS EYES ONLY – RESTRICTED
CONFIDENTIAL”.

c.

Outside experts and consultants retained by the Receiving Party to assist in this
action and their support staff and clerical employees assisting in the litigation,
subject to paragraphs 17-19 of this Agreement, provided that disclosure is only to
the extent necessary to perform such work, and (a) such expert or consultant has
agreed to be bound by the provisions of the Agreement To Protect Source Code
by signing a copy of Exhibit A; (b) such expert or consultant is not a current
officer, director, or employee of a Party or of a competitor of a Party, nor
anticipated at the time of retention to become an officer, director or employee of a
Party or of a competitor of a Party; (c) such expert or consultant is not involved in
competitive decision-making, as defined by U.S. Steel v. United States, 730 F.2d
1465, 1468 n.3 (Fed. Cir. 1984), on behalf of a Party or a competitor of a Party;
and (d) no unresolved objections to such disclosure exist after proper notice has
been given to all Parties as set forth in Paragraph 17 below. Without the express
prior written consent of the Defendant that produced the Protected Material, no
expert or consultant retained by a Defendant in this matter shall have access to
“SOURCE CODE – OUTSIDE ATTORNEYS EYES ONLY – RESTRICTED

-8-

CONFIDENTIAL” Protected Material produced by another Defendant in this
matter;
d.

Witnesses at deposition and/or trial affiliated with the Source Code for the
Producing Party, provided that such witnesses may not retain copies of Source
Code unless permitted by other provisions of this Agreement;

e.

Any mediator who is assigned to hear this matter, and his or her staff, subject to
their agreement to maintain confidentiality to the same degree as required by this
Agreement To Protect Source Code; and

f.

Any other person with the prior written consent of the Producing Party.

Disclosure of Protected Material to Outside Counsel Not Appearing in the Action
16.

Prior to disclosing a Producing Party’s “CONFIDENTIAL - OUTSIDE

ATTORNEYS EYES ONLY” or “SOURCE CODE – OUTSIDE ATTORNEYS EYES ONLY –
RESTRICTED CONFIDENTIAL” material to an outside attorney who is not Outside Counsel as
defined in paragraph 6, a Receiving Party shall provide written notice to the Producing Party that
it intends to disclose such material to the outside attorney, including:
a.

the name of the outside attorney to which the Receiving Party intends to transmit
the information (the “Proposed Recipient”);

b.

the name of the Proposed Recipient’s firm; and

c.

a copy of Exhibit A signed by the Proposed Recipient.

No Receiving Party shall provide any such “CONFIDENTIAL - OUTSIDE ATTORNEYS
EYES ONLY” or “SOURCE CODE – OUTSIDE ATTORNEYS EYES ONLY – RESTRICTED
CONFIDENTIAL” material to the outside attorney during the objection period of Paragraph 18,
or while any such objection is unresolved under Paragraph 19.

-9-

Disclosure of Protected Material to Outside Experts and Consultants
17.

Prior to disclosing a Producing Party’s “CONFIDENTIAL - OUTSIDE

ATTORNEYS EYES ONLY” or “SOURCE CODE – OUTSIDE ATTORNEYS EYES ONLY –
RESTRICTED CONFIDENTIAL” material to any outside expert or consultant, a Receiving
Party shall provide written notice to each Producing Party that has produced or may produce
such material the Receiving Party intends to disclose to the outside expert or consultant,
including:
a.

the name of the outside expert or consultant to which the Receiving Party intends
to transmit the information (the “Proposed Recipient”);

b.

the present employer and title of the Proposed Recipient;

c.

an up-to-date curriculum vitae for the Proposed Recipient;

d.

a list of all publications authored by the Proposed Recipient for the last ten (10)
years;

e.

a list of current and past employment and consulting relationships undertaken by
the Proposed Recipient for the last five (5) years, including direct relationships
and relationships through entities owned or controlled by the Proposed Recipient;

f.

a list of all other cases in which, during the previous five (5) years, the expert or
consultant testified, whether at trial or by deposition; and

g.

a copy of Exhibit A signed by the Proposed Recipient.

No Receiving Party shall provide any “CONFIDENTIAL - OUTSIDE ATTORNEYS EYES
ONLY” or “SOURCE CODE – OUTSIDE ATTORNEYS EYES ONLY – RESTRICTED
CONFIDENTIAL” material to the outside expert or consultant during the objection period of
Paragraph 18, or until any such objection is resolved under Paragraph 19.

- 10 -

18.

Within seven (7) business days of receiving the information in Paragraphs 16 or

17 regarding a Proposed Recipient, a Producing Party may for good cause object in writing to its
disclosure to the Proposed Recipient. The objection cannot be unreasonable. The seven (7)
business day objection period does not begin to run until the Receiving Party provides the
Producing Party with all of the above information, and the Source Code is not accessible until
the proposed Recipient is approved. In the absence of any objection by the end of this period,
the Proposed Recipient shall be deemed approved to receive “CONFIDENTIAL - OUTSIDE
ATTORNEYS EYES ONLY” or “SOURCE CODE – OUTSIDE ATTORNEYS EYES ONLY –
RESTRICTED CONFIDENTIAL” information (as applicable) under this Agreement To Protect
Source Code from all Producing Parties which received notifications under Paragraphs 16 or 17
above.
19.

If an objection is made under Paragraph 18 above, the parties affected shall meet

and confer within three (3) business days following such objection to attempt in good faith to
resolve the dispute informally. If the dispute is not resolved, the party seeking the disclosure
shall seek relief from the Court no later than seven (7) business days following its objection
under Paragraph 18. If relief is not sought from the Court within this time, the objection stands
and the Proposed Recipient shall not receive “CONFIDENTIAL - OUTSIDE ATTORNEYS
EYES ONLY” and/or “SOURCE CODE – OUTSIDE ATTORNEYS EYES ONLY –
RESTRICTED CONFIDENTIAL” information respectively under this Agreement To Protect
Source Code from the Producing Party which had objected under Paragraph 18 above.
Disclosure and Review of Source Code
20.

To the extent a Producing Party’s Source Code is discoverable in this action, it

may be designated as “SOURCE CODE – OUTSIDE ATTORNEYS EYES ONLY –

- 11 -

RESTRICTED CONFIDENTIAL” and in addition to the protections of paragraph 14-19, shall
be subject to the following additional restrictions and protections:
a.

Source code in electronic format shall be made available for inspection in native
format on a standalone computer (the “Source Code Computer”) in a secure room
(the “Source Code Review Room”) at one of the following locations at the
election of the Producing Party: (i) any office of the Producing Party’s outside
counsel in Texas, (ii) any place of business of the Producing Party in Texas, or
(iii) if mutually agreed to, any other location.

b.

No recordable media or recordable devices, including without limitation sound
recorders, computers, cellular telephones, peripheral equipment, cameras, CDs,
DVDs, or drives of any kind, shall be permitted into the Source Code Review
Room. The Receiving Party’s expert(s) and/or consultant(s) may bring a single
computer with a password protected encrypted hard drive into the review room
for the sole purpose of taking and reviewing his or her notes.

c.

Under no circumstances is the Source Code to be copied or transmitted in
electronic form without the prior authorization of the Producing Party, except as
otherwise provided herein. The Producing Party may enforce reasonable
restrictions on the review of source code in electronic format, including making
source code available on a stand-alone, non-networked computer, with
input/output connections disabled such that source code cannot be removed,
copied, or otherwise transferred from the Source Code Computer and the Source
Code Computer cannot be connected to the internet.

- 12 -

d.

The Receiving Party’s expert(s) and/or consultant(s) may take notes relating to
the Source Code, but may not copy the Source Code into the notes and may not
take such notes electronically on the Source Code Computer itself.

e.

The Receiving Party shall identify all experts or consultants it requests be allowed
to obtain access to the source code (“Proposed Recipient”) at least seven (7)
business days prior to any inspection, to permit the Producing Party time to
object. The Receiving Party, as part of the identification procedure, shall provide
the Producing Party with the information set forth in paragraph 17. The outside
counsel for the Receiving Party retaining the expert or consultant shall also retain
the expert or consultant executed Exhibit A in its files.

f.

No copies of all or any portion of the Source Code may leave the Source Code
Review Room except as otherwise provided herein. Further, no other written or
electronic record of the Source Code is permitted except as otherwise provided
herein. The Receiving Party may request certain portions of the Producing
Party’s Source Code be printed to paper copies by identifying such portions to the
Receiving Party. Printing is presumed be the exception and to be limited in
quantity. The parties will work together to agree on a mutually acceptable
amount of printed pages in order to allow the Receiving Party to update and/or
amend its Infringement Contentions. It is beyond the scope of this agreement to
determine what a reasonable amount of printed material would be. The Receiving
Party shall not request printed copies of Source Code in order to review blocks of
Source Code elsewhere in the first instance, i.e., as an alternative to reviewing
that Source Code electronically on the Source Code Computer, as the Parties
acknowledge and agree that the purpose of the protections herein would be
- 13 -

frustrated by printing portions of code for review and analysis elsewhere, and that
the Producing Party shall be required to print Source Code only when absolutely
and directly necessary to prepare court filings or pleadings or other papers
(including a testifying expert’s expert report). The Producing Party will affix the
proper Bates labeling and “SOURCE CODE – OUTSIDE ATTORNEYS EYES
ONLY – RESTRICTED CONFIDENTIAL” confidentiality designation to any
printed copies to be produced to the Receiving Party.
g.

All persons who will review a Producing Party’s Source Code on behalf of a
Receiving Party, including members of a Receiving Party’s outside law firm, shall
be identified in writing to the Producing Party at least five (5) business days in
advance of the first time that such person reviews such Source Code. Such
identification shall be in addition to any other disclosure required under this
Agreement. All persons viewing Source Code in the Source Code Review Room
shall sign on each day they view Source Code a log, if provided, that will include
the names of persons who enter the Source Code Review Room to view the
Source Code and when they enter and depart.

h.

Unless otherwise agreed in advance by the Parties in writing, following each day
on which inspection is done under this Agreement, the Receiving Party’s outside
counsel and/or experts shall remove all notes, documents, and all other materials
from the Source Code Review Room. The Producing Party shall not be responsible
for any items left in the room following each inspection session, and the
Receiving Party shall have no expectation of confidentiality for any items left in
the room following each inspection session without a prior agreement to that
effect.
- 14 -

i.

The Receiving Party will not print, copy, remove, or otherwise transfer any
Source Code from the Source Code Computer including, without limitation,
copying, removing, or transferring the Source Code onto any recordable media or
recordable device. The Receiving Party will not transmit any Source Code in any
way from the Source Code Review Room.

j.

The Receiving Party’s outside counsel of record and any person receiving a copy
of any Source Code shall maintain and store any paper copies of the Source Code
at their offices in a manner that prevents duplication of or unauthorized access to
the Source Code, including, without limitation, storing the Source Code in a
locked room or cabinet at all times when it is not in use.

k.

The Receiving Party’s outside counsel of record may make no more than three (3)
additional paper copies of any portions of the Source Code received from a
Producing Party pursuant to Paragraph 20.f above, not including copies attached
to court filings, and shall maintain a log of all paper copies of the Source Code.
The log shall include the names of the reviewers and/or recipients of paper copies
and locations where the paper copies are stored. Upon two (2) business day’s
advance notice to the Receiving Party by the Producing Party, the Receiving Party
shall provide a copy of this log to the Producing Party.

Prosecution Bar
21.

Absent written consent from the Producing Party, any individual who receives

access to “OUTSIDE ATTORNEYS’ EYES ONLY” or “SOURCE CODE – OUTSIDE
ATTORNEYS EYES ONLY – RESTRICTED CONFIDENTIAL” information shall not be
involved in the prosecution of patents or patent applications relating to technology that is the
subject of the accessed information, including without limitation the patents asserted in this
- 15 -

action and any patent or application claiming priority to or otherwise related to the patents
asserted in this action, before any foreign or domestic agency, including the United States Patent
and Trademark Office (“the Patent Office”). For purposes of this paragraph, “prosecution”
means directly or indirectly drafting, amending, advising, or otherwise affecting the scope or
maintenance of patent claims. To avoid any doubt, “prosecution” as used in this paragraph does
not include representing a party before a domestic or foreign agency in connection with a reissue
protest, ex parte reexamination or inter partes reexamination. This Prosecution Bar shall begin
when access to “ATTORNEYS’ EYES ONLY” or “SOURCE CODE – OUTSIDE
ATTORNEYS EYES ONLY – RESTRICTED CONFIDENTIAL” information is first received
by the affected individual and shall end two (2) years after final termination of this action. No
other provision of this Agreement to Protect Source Code shall be construed as invoking a
prosecution bar.
Making and Challenging Designations
22.

A Producing Party designating Protected Material shall limit such designations to

material that it believes in good faith meets the applicable standards in Paragraph 8 above.
23.

A Producing Party shall designate Protected Material in substantially the

following manner:
a.

The Producing Party may designate documents or written discovery responses by
affixing the legend “CONFIDENTIAL” or “CONFIDENTIAL - OUTSIDE
ATTORNEYS EYES ONLY” on each page that contains Protected Material.
“SOURCE CODE – OUTSIDE ATTORNEYS EYES ONLY – RESTRICTED
CONFIDENTIAL” Protected Material must be designated in accordance with
Paragraphs 14-19.

- 16 -

b.

Documents made available for inspection need not be designated in advance and
shall be treated as “CONFIDENTIAL - OUTSIDE ATTORNEYS EYES ONLY”
until the Producing Party provides copies of documents identified by the
inspecting party for production affixed with the appropriate legend.

c.

Parties may at a deposition or hearing or up to fourteen (14) business days after a
deposition or hearing designate the depositions or hearing, or portions thereof, as
Protected Material pursuant to this Agreement. If discovery or testimony is taken
of Third Parties, the Third Parties may also make the same designations at a
deposition or hearing or up to fourteen (14) business days after a deposition or
hearing. The party making the designation shall make arrangements with the
court reporter to label the relevant pages with the appropriate designation. Video
or DVD versions of the depositions will automatically have the same designation
as the transcript. Access to the deposition or hearing transcript so designated shall
be limited in accordance with the terms of this Agreement. Until expiration of the
14- business day period, the entire deposition or hearing transcript shall be treated
as “CONFIDENTIAL - OUTSIDE ATTORNEYS EYES ONLY.” The
Producing Party may cure such failure in accordance with Paragraph 24.

d.

A Producing Party shall affix the appropriate legend prominently on any tangible
thing or media, or on the exterior of any case or container in which the
information or item is stored. To ensure the security of “CONFIDENTIAL” and
“CONFIDENTIAL - OUTSIDE ATTORNEYS EYES ONLY” information
produced in electronic form, the Producing Party may produce such documents in
TIFF or PDF formats. A Producing Party may designate any other Protected
Material not in documentary, tangible or physical form by informing the
- 17 -

Receiving Party of the designation in writing at or before the time of production
or inspection.
24.

Inadvertent failure to designate Protected Material does not waive a Producing

Party’s right to secure the protections of this Agreement.
a.

The Producing Party must notify the Receiving Party in writing promptly upon
the discovery of the inadvertent failure to designate and take whatever steps are
necessary to replace the documents with documents containing the appropriate
legends or otherwise designate the materials as set forth above.

b.

Upon receiving the written notice, the Receiving Party shall promptly make all
reasonable efforts to assure that the material is treated in accordance with the
corrected designation, including seeking the retrieval or destruction of any copies
distributed to unauthorized individuals; and destroy copies of documents that have
been replaced with documents containing the proper designation.

c.

The Receiving Party shall not be held in violation of this Agreement for any
otherwise permissible disclosures made before receipt of such notice.

25.

At any time, a Receiving Party may challenge the propriety of the designation on

Protected Materials by providing the Producing Party written notice identifying the documents or
information that it contends should be designated differently. The Receiving Party challenging
the propriety of the designation and the Producing Party which designated the Protected Material
shall meet and confer in an attempt to resolve any such disputes promptly and informally. If they
cannot reach agreement, either party may follow the Court’s rules governing discovery disputes
to request that the Court affirm, cancel or modify the designation. On any such request to the
Court, the Receiving Party shall bear the burden of establishing good cause to establish that the
Producing Party incorrectly classified the Protected Material. Until the Court rules otherwise,
- 18 -

the Producing Party’s designation of the Protected Material remains in effect and is fully
enforceable under this Agreement.
26.

Information does not qualify for protection under this Agreement, and none of its

provisions apply to, material that:
a.

is available to the general public at the time of its production, or becomes
available to the general public after its production through no fault of a Receiving
Party;

b.

was independently and legally obtained by a Receiving Party from any other
person or party having no obligation of confidentiality and the right to make such
disclosure; or

c.

was previously produced, disclosed or provided by the Producing Party to the
Receiving Party without an obligation of confidentiality, except for materials
covered under Paragraph 24 inadvertent disclosure.

Inadvertent Production of Privileged Documents
27.

The inadvertent production of documents or other material subject to the attorney-

client privilege, work product doctrine or any other privilege or immunity does not constitute a
waiver of any applicable privilege.
a.

Promptly upon learning of the inadvertent disclosure, the Producing Party must
notify the Receiving Party of the inadvertent production, provide the basis for the
asserted privilege(s), and request return of the documents.

b.

The Receiving Party must promptly return or confirm destruction of all copies of
such materials; but doing so shall not preclude the Receiving Party from seeking
to compel production of those materials, or constitute an admission that the
materials were in fact privileged.
- 19 -

c.

In addition to any other obligation to preserve documents, the Producing Party
must preserve any documents recalled under this Paragraph for the duration of
this litigation.

Filing Under Seal
28.

All transcripts of depositions, exhibits, answers to interrogatories, pleadings,

briefs, and other documents submitted to the Court that have been designated as
“CONFIDENTIAL,” or “CONFIDENTIAL - OUTSIDE ATTORNEYS EYES ONLY,” or
which contain information so designated, shall be filed under seal in accordance with Local Rule
CV-5(a)(7), or if electronic submission is impossible, in sealed envelopes or other appropriate
sealed containers labeled with the case caption, the words “CONFIDENTIAL,”
“CONFIDENTIAL - OUTSIDE ATTORNEYS EYES ONLY,” or “SOURCE CODE –
OUTSIDE ATTORNEYS EYES ONLY – RESTRICTED CONFIDENTIAL” as appropriate,
and a statement in substantially the following form, or such as other form as Agreement by the
Court or required by the Clerk of the Court:
This envelope contains confidential information filed in this case
by [name of party] that is subject to a Agreement To Protect
Source Code of the Court. It should not be opened or its contents
disclosed, revealed or made public except by Agreement of the
Court or agreement of the parties.
Additional Protection
29.

This Agreement To Protect Source Code is entered without prejudice to the right

of any party to seek different or additional protections if it believes the protections of this
Agreement are not applicable or are inadequate. Nothing herein shall be deemed to preclude any
Producing Party from seeking such different or additional protection, including that certain
matter not be produced at all. Each of the Parties shall also retain the right to file a motion with
the Court (a) to modify this Agreement to allow disclosure of Protected Material to additional
- 20 -

persons or entities if reasonably necessary to prepare and present this Action and/or (b) to apply
for additional protection of Protected Material.
30.

Any Party knowing or believing that any other party is in violation of or intends

to violate this Agreement and has raised the question of violation or potential violation with the
opposing party and has been unable to resolve the matter by agreement may move the Court for
such relief as may be appropriate in the circumstances. Pending disposition of the motion by the
Court, the Party alleged to be in violation of or intending to violate this Agreement shall
discontinue the performance of and/or shall not undertake the further performance of any action
alleged to constitute a violation of this Agreement.
No Waiver
31.

Execution of this Agreement To Protect Source Code shall not constitute a waiver

of the right of any party to claim in this action or otherwise that any Protected Material, or any
portion thereof, is privileged or otherwise non-discoverable, or is not admissible in evidence in
this action or any other proceeding.
No Limitations on Party’s Own Protected Material
32.

Nothing in this Agreement shall restrict any party to this lawsuit or its attorneys

from disclosing or using, in any manner and for any purpose, its own Protected Material.
Subpoena of Protected Material
33.

If any Receiving Party receives a subpoena or other legal process commanding

the production of any Protected Material, that party shall inform the party requesting the
production that some or all of the material covered by the subpoena or Agreement is subject to
this Agreement To Protect Source Code and promptly give written notice thereof to the
Producing Party (or their counsel of record in this case). If the Producing Party challenges the
production, it shall have the burden of seeking a court Agreement relieving the subpoenaed party
of the obligations pursuant to the subpoena; and the Receiving Party shall not produce any
- 21 -

Protected Material absent an Agreement of a court of competent jurisdiction or the express
written consent of the Producing Party.
Unauthorized Access
34.

The Receiving Party shall promptly notify the Producing Party upon becoming

aware of any loss, theft and/or unauthorized copying or disclosure of Protected Material, and
shall take all steps reasonably necessary and available to retrieve such Protected Material and
prevent any further unauthorized access or dissemination.
Disposition of Protected Material
35.

Unless otherwise Ordered or agreed, within sixty (60) days after the settlement

and dismissal of a Producing Party from this action or the final non-appealable termination of
this action, each Receiving Party shall, at the Producing Party’s option, return or destroy all
Protected Material, including all copies, duplicates, indexes, notes, abstracts, compilations,
summaries or any other form of reproducing or capturing of any Protected Material. Outside
counsel for each party shall remind any experts, consultants and others as appropriate of their
obligation to destroy or return Protected Material. Outside Counsel for the party or parties
receiving the Protected Material shall keep their attorney work product and all documents filed in
this action which refer or relate to any Protected Material. Attorney work product may be used
in subsequent litigation provided that such use does not disclose Protected Material or any
information contained therein. The Receiving Party shall submit a written certification by the
sixty-day (60) deadline confirming that all Protected Material has been destroyed (or handled as
otherwise ordered or agreed) and which affirms that the Receiving Party has not retained any
paper or electronic copies not otherwise authorized under this Agreement.
Survival of Agreement
36.

The terms of this Agreement To Protect Source Code shall survive and remain in

effect after the termination of the above-captioned matter.
- 22 -

IN THE UNITED STATES DISTRICT COURT
FOR THE EASTERN DISTRICT OF TEXAS
TYLER DIVISION
UNILOC USA, INC., ET AL.
Plaintiffs,
vs.

CASE NO. 6:10-CV-472
PATENT CASE

NATIONAL INSTRUMENTS CORP., ET
AL.
Defendants.

UNILOC USA, INC., ET AL.
Plaintiffs,
CASE NO. 6:10-CV-591
PATENT CASE

vs.
ENGRASP, INC., ET AL.
Defendants.

UNILOC USA, INC., ET AL.
Plaintiffs,
CASE NO. 6:10-CV-636
PATENT CASE

vs.
BMC SOFTWARE, INC., ET AL.
Defendants.

EXHIBIT A
UNDERTAKING REGARDING AGREEMENT TO PROTECT SOURCE CODE

I, ____________________________________________, declare that:
1.

My address is ___________________________________________________________.
My current employer is ___________________________________________________.
- 24 -

My current occupation is __________________________________________________.
2.

I have received a copy of the Agreement To Protect Source Code in this action. I have
carefully read and understand the provisions of the Agreement To Protect Source Code.

3.

I will comply with all of the provisions of the Agreement To Protect Source Code. I will
hold in confidence, will not disclose any Protected Materials to anyone not qualified
under the Agreement To Protect Source Code, and will use only for purposes of this
action any information designated as “CONFIDENTIAL,” “CONFIDENTIAL OUTSIDE ATTORNEYS EYES ONLY” or “SOURCE CODE – OUTSIDE
ATTORNEYS EYES ONLY – RESTRICTED CONFIDENTIAL” that is disclosed to
me.

4.

Promptly upon termination of these actions or after my involvement in these actions
otherwise terminates, I will return all documents and things designated as
“CONFIDENTIAL,” “CONFIDENTIAL - OUTSIDE ATTORNEYS EYES ONLY” or
“SOURCE CODE – OUTSIDE ATTORNEYS EYES ONLY – RESTRICTED
CONFIDENTIAL” that came into my possession, and all documents and things that I
have prepared relating thereto, to the outside counsel for the party by whom I am
employed.

5.

I hereby submit to the jurisdiction of this Court for the purpose of enforcement of the
Agreement To Protect Source Code in this action.
I declare under penalty of perjury that the foregoing is true and correct.
Signature ________________________________________
Name Printed _____________________________________
Date ____________________________________________

- 25 -