AMERICAN SOCIETY FOR TESTING AND MATERIALS et al v. PUBLIC.RESOURCE.ORG, INC.

Filing 213

RESPONSE re 202 MOTION for Summary Judgment filed by AMERICAN SOCIETY FOR TESTING AND MATERIALS, AMERICAN SOCIETY OF HEATING, REFRIGERATING, AND AIR-CONDITIONING ENGINEERS, INC., NATIONAL FIRE PROTECTION ASSOCIATION, INC.. (Attachments: # 1 Plaintiffs' Third Supplemental Statement of Material Facts, # 2 Declaration of Thomas O'Brien, # 3 Declaration of Jane W. Wise, # 4 Exhibit 174, # 5 Exhibit 175, # 6 Exhibit 176, # 7 Exhibit 177 (Part 1), # 8 Exhibit 177 (Part 2), # 9 Exhibit 177 (Part 3), # 10 Exhibit 178, # 11 Exhibit 179, # 12 Exhibit 180, # 13 Exhibit 181, # 14 Exhibit 182, # 15 Exhibit 183, # 16 Exhibit 184, # 17 Exhibit 185, # 18 Exhibit 186, # 19 Plaintiffs' Response to Defendant's Statement of Disputed Facts (Redacted), # 20 Plaintiffs' Statement of Disputed Facts and Objections, # 21 Plaintiffs' Response to Defendant's Evidentiary Objections, # 22 Plaintiffs' Opposition to Defendant's Request for Judicial Notice)(Fee, J.)

Download PDF

Exhibit 182 Table of Codes ↑ Public Safety Standards United States (Federal Government) In order to promote public education and public safety, equal justice for all, a better informed citizenry, the rule of law, world trade and world peace, this legal document is hereby made available on a noncommercial basis, as it is the right of all humans to know and speak the laws that govern them. (See also State and Local codes.) STANDARD YEAR ORGANIZATION TITLE CFR AUTHORITY 3M 0222 1995 3M Corporation Organochlorine Pesticides and PCBs in Wastewater Using Empore Disk 40 CFR 136.3(a) Table ID AA CONSTRUCT 1971 Aluminum Association Aluminum Construction Manual 24 CFR 200, Subpart S AA 1967 Aluminum Association Aluminum Construction Manual 24 CFR 200, Subpart S AA DATA 1982 Aluminum Association Aluminum Standards and Data, Seventh Edition 49 CFR 178.65(b)(2) AAMA 101-IS2 1997 American Architectural Manufacturers Association Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors 10 CFR 434.402.2.2.4 AAMA 605 1998 American Architectural Manufacturers Association Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels 40 CFR 59.401 AAMA 1002.10 1993 American Architectural Manufacturers Association Aluminum Insulating Products for Windows and Sliding Glass Doors 24 CFR 200.938 AAMA 1102.7 1989 American Architectural Manufacturers Association Voluntary Specifications for Aluminum Storm Doors 10 CFR 440 Appendix A AAMA 1503.1 1988 American Architectural Manufacturers Association Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections 24 CFR 3280.508(e) AAMA 1702.2 1995 American Architectural Manufacturers Association Swinging Exterior Passage Doors Voluntary Standard for Utilization in Manufactured-Housing 24 CFR 3280.405(e)(2) AAMA 1704 1985 American Architectural Manufacturers Association Voluntary Standard Egress Window Systems for Utilization in Manufactured-Housing 24 CFR 3280.404(b) AAMD 1973 American Association on Mental Deficiency Classification in Mental Retardation 42 CFR 483.102(b)(3)(i) AAMVA CDLIS.2.0 1998 American Association of Motor Vehicle Administrators Commercial Driver License Information System (CDLIS) State Procedures 49 CFR 384.231(d) AASHTO 1973 American Association of State Highway and Transportation Officials Standard Specifications for Highway Bridges 24 CFR 200, Subpart S AASHTO 2001 American Association of State Highway and Transportation Officials A Policy on Geometric Design of Highways and Streets 23 CFR 625.4 https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 AASHTO 2005 American Association of State Highway and Transportation Officials A Guide for Accommodating Utilities Within Highway Right-ofWay 23 CFR 645.211 AATCC 118 1997 American Association of Textile Chemists and Colorists Oil Repellency: Hydrocarbon Resistance Test 10 CFR 430 Subpart B, App. J1, 2.6.4.5.1 AATCC 124 1996 American Association of Textile Chemists and Colorists Appearance of Durable Press Fabrics After Repeated Home Laundering 16 CFR 1615.32(a)(1) ABYC A-01 1993 American Boat and Yacht Council Marine Liquified Petroleum Gas Systems 46 CFR 184.240(a) ABYC A-07 1973 American Boat and Yacht Council Boat Heating Systems 46 CFR 184.200 ABYC A-16 1997 American Boat and Yacht Council Electric Navigation Lights 46 CFR 25.10-3(a)(2) ABYC A-22 1993 American Boat and Yacht Council Marine Compressed Natural Gas Systems 46 CFR 184.240(b) ABYC E-01 1973 American Boat and Yacht Council Bonding of Direct Current Systems 46 CFR 28.345(b) ABYC E-09 1990 American Boat and Yacht Council Direct Current (DC) Electrical Systems on Boats 46 CFR 183.340(b)(4) ABYC H-02 1989 American Boat and Yacht Council Ventilation of Boats Using Gasoline 46 CFR 28.340(c) ABYC H-22 1986 American Boat and Yacht Council DC Electric Bilge Pumps Operating Under 50 Volts 46 CFR 182.500(b) ABYC H-24 1993 American Boat and Yacht Council Gasoline Fuel Systems 46 CFR 182.455(c) ABYC H-25 1994 American Boat and Yacht Council Portable Gasoline Fuel Systems for Flammable Liquids 46 CFR 182.130 ABYC H-32 1987 American Boat and Yacht Council Ventilation of Boats Using Diesel Fuel 46 CFR 182.470(c) ABYC H-33 1989 American Boat and Yacht Council Diesel Fuel Systems 46 CFR 182.130 ABYC P-01 1993 American Boat and Yacht Council Safe Installation of Exhaust Systems for Propulsion and Auxiliary Engines 46 CFR 182.130 ABYC P-04 1989 American Boat and Yacht Council Marine Inboard Engines 46 CFR 182.420(b) ACGIH 1987 American Conference of Governmental Industrial Hygienists Guidelines for the Selection of Chemical Protective Clothing, Third Edition 46 CFR 153.933(a) ACGIH 1998 American Conference of Governmental Industrial Hygienists Industrial Ventilation Manual 40 CFR 63.2984(e) ACI 318 1995 American Concrete Institute Building Code Requirements for Reinforced Concrete 30 CFR 250.901(d)(1) ACI 1980 American Concrete Institute Manual of Concrete Practice, Part 1 24 CFR 200, Subpart S ACRI 210-240 2003 Air Conditioning and Refrigeration Institute Unitary Air-Conditioning and AirSource Heat Pump Equipment 10 CFR 431.96 ACRI 310/380 2004 Air-Conditioning, Heating and Refrigeration Institute Packaged Terminal AirConditioners and Heat Pumps 10 CFR 431.96, Table 1 ACRI 320 1998 Water Source Heat Pumps 10 CFR 434.403 https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 Air-Conditioning, Heating, and Refrigeration Institute ACRI 325 1998 Air-Conditioning, Heating, and Refrigeration Institute Ground Water-Source Heat Pumps 10 CFR 434.403 ACRI 330 1998 Air-Conditioning, Heating, and Refrigeration Institute Ground-Source Closed-Loop Heat Pumps 10 CFR 434.403 ACRI 340-360 2004 Air Conditioning and Refrigeration Institute Commercial and Industrial Unitary Air-Conditioning and Heat Pump Equipment 10 CFR 434.403 ACRI 365 1994 Air Conditioning and Refrigeration Institute Commercial and Industrial Unitary Air-Conditioning Condensing Units 10 CFR 434.403 ACRI 1200 2006 Air Conditioning and Refrigeration Institute Performance Rating of Commercial Refrigerated Display Merchandisers and Storage Cabinets 10 CFR 431.66(a)(3) AERA 1999 American Educational Research Association Standard for Educational and Psychological Testing 34 CFR 668.148(a)(2) (iv) AFPA 2001 American Forest and Paper Association National Design Specification for Wood Construction With Supplemental Design Values for Wood Construction 24 CFR 3280.304(b)(1) AGA 3.1 1990 American Gas Association Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids: Part 1 40 CFR 75, Appendix D AGA 2001 American Gas Association Purging Principles and Practices 49 CFR 193.2615 AHA A135.4 1995 American Hardboard Association Basic Hardboard 24 CFR 3280.304(b)(1) AHA A135.5 1995 American Hardboard Association Prefinished Hardboard Paneling 24 CFR 3280.304(b)(1) AHA A135.6 1998 American Hardboard Association Hardboard Siding 24 CFR 3280.304(b)(1) AHAM DW-1 1992 Association of Home Appliance Manufacturers Household Electric Dishwashers 10 CFR 430 Subpart B AHAM HLD-1 1974 Association of Home Appliance Manufacturers Performance Evaluation Procedure for Household Tumble Type Clothes Dryers 10 CFR 430 Subpart B AHAM HRF-1 1979 Association of Home Appliance Manufacturers Household Refrigerators, Combination Refrigerator-Freezers, and Household Freezers 10 CFR 430 Subpart B AHPA 1992 American Herbal Products Association Herbs of Commerce 21 CFR 101.4(h) AI MSI-1 1970 Asphalt Institute Thickness Design--Full Depth Asphalt Pavement Structures for Highways and Streets 24 CFR 200, Subpart S AIHA 1994 American Industrial Hygiene Association Laboratory Ventilation Workbook 42 CFR 52b.12(c)(10) AIMM MS41 1996 Association for Information and Image Management Dimensions of Unitized Microfilm Carriers and Apertures (Aperture, Camera, Copy and Image Cards) 36 CFR 1238.10(a)(1) AIMM IT2.18 1996 https://law.resource.org/pub/us/cfr/manifest.us.html 36 CFR 1238.14(d)(2) 12/19/2019 Association for Information and Image Management Photography--Density Measurements--Part 3: Spectral Conditions AIMM/PIMA IT9.2 1998 Association for Information and Image Management Photographic Processed Films, Plates, and Papers--Filing Enclosures and Storage Containers 36 CFR 1238.10(a)(1) AIMM/PIMA IT9.11 1998 Association for Information and Image Management Imaging Materials--Processed Safety Photographic Film--Storage 36 CFR 1234.14(b)(1) AIMM IT9.23 1996 Association for Information and Image Management Imaging Materials--Polyester Based Magnetic Tape--Storage 36 CFR 1234.14(b)(2) AIMM/PIMA IT9.25 1998 Association for Information and Image Management Imaging Materials--Optical Disc Media--Storage 36 CFR 1234.14(b)(3) AIMM MS1 1996 Association for Information and Image Management Recommended Practice for Alphanumeric Computer-Output Microforms--Operational Practices for Inspection and Quality Control 36 CFR 1238.14(c) AIMM MS5 1992 Association for Information and Image Management Microfiche 36 CFR 1238.10(b) AIMM MS14 1996 Association for Information and Image Management Specifications for 16mm and 35mm Roll Microfilm 36 CFR 1238.10(a)(1) AIMM MS19 1993 Association for Information and Image Management Standard Recommended Practice-Identification of Microforms 36 CFR 1238.12(c) AIMM MS23 1998 Association for Information and Image Management Standard Recommended Practice-Production, Inspection, and Quality Assurance of First-Generation, Silver Microforms of Documents 36 CFR 1238.14(d)(2) AIMM MS32 1996 Association for Information and Image Management Microrecording of Engineering Source Documents on 35 mm Microfilm 36 CFR 1238.10(a)(1) AIMM MS43 1998 Association for Information and Image Management Standard Recommended Practice-Operational Procedures--Inspection and Quality Control of Microfilms and Documents 36 CFR 1238.14(d)(1)(i) AIMM MS45 1990 Association for Information and Image Management Recommended Practice for Inspection of Stored Silver-Gelatin Microforms for Evidence of Deterioration 36 CFR 1238.22(d)(1) AIMM TR34 1996 Association for Information and Image Management Sampling Procedures for Inspection by Attributes of Images in Electronic Image Management and Micrographic Systems 36 CFR 1237.28(d)(2) ALCIDE 980342EA 1995 Alcide Corporation Determination of Sodium Chlorite: 50 ppm to 1500 ppm concentration 21 CFR 173.325(g) AMCA 210 1999 Air Movement and Control Association Laboratory Methods of Testing Fans for Ratings 10 CFR 430 Subpart B, App. M J-STD-102 2011 Alliance for Telecommunications Industry Solutions Joint ATIS/TIA CMAS Federal Alert Gateway to CMSP Gateway Interface Text Specification Warning, Alert and Response Network (WARN) Act of 2006 TELCO FAQ 1891 American Telephone and Telegraph Practical Information for Telephonists https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 ANSI A10.3 1970 American National Standards Institute Safety Requirements for Powder Actuated Fastening Systems 29 CFR 1926 ANSI A10.4 (pdf) ANSI A10.4 (html) 1963 American National Standards Institute Safety Requirements for Workmens Hoists 29 CFR 1926 ANSI A10.5 (pdf) ANSI A10.5 (html) 1969 American National Standards Institute Safety Requirements for Material Joists 29 CFR 1926 ANSI A14.1 (pdf) ANSI A14.1 (html) ANSI A14.1 (svg) 1990 American National Standards Institute Ladders--Wood--Safety Requirements 29 CFR 1917 ANSI A14.2 (pdf) ANSI A14.2 (html) ANSI A14.2 (svg) 1990 American National Standards Institute Ladders--Portable Metal--Safety 29 CFR 1917 ANSI A92.2 (pdf) ANSI A92.2 (html) 1969 American National Standards Institute Vehicle Mounted Elevating and Rotating Work Platforms 29 CFR 453 ANSI B7.1 (pdf) ANSI B7.1 (html) 1970 American National Standards Institute Safety Code for the Use, Care, and Protection of Abrasive Wheels 29 CFR 1926 ANSI B20.1 (pdf) ANSI B20.1 (html) ANSI B20.1 (svg) 1957 American National Standards Institute Safety Code for Conveyors, Cableways, and Related Equipment 29 CFR 1926 ANSI B30.6 (pdf) ANSI B30.6 (html) ANSI B30.6 (svg) 1969 American National Standards Institute Safety Code for Derricks 29 CFR 1926 ANSI B36.19 1979 American National Standards Institute Welded and Seamless Wrought Steel Pipe 24 CFR 3280.705(b)(1) ANSI B56.1 (pdf) ANSI B56.1 (html) ANSI B56.1 (svg) 1969 American National Standards Institute Safety Standard for Powered Industrial Trucks 29 CFR 1926 ANSI N14.1 2001 American National Standards Institute Packaging of Uranium Hexafluoride for Transport 49 CFR 173.420(a)(1) ANSI O1.1 (pdf) ANSI O1.1 (html) 1961 American National Standards Institute Safety Code for Woodworking Machinery 29 CFR 1926 ANSI S1.4 1983 American National Standards Institute Specifications for Sound Level Meters 7 CFR 1755.522(s)(3) (v) ANSI S1.11 2004 American National Standards Institute Specification for Octave, HalfOctave, and Third Octave Band Filter Sets 49 CFR 227 ANSI S1.25 1991 American National Standards Institute Specification for Personal Noise Dosimeters 49 CFR 227.103(c)(2) (iii) ANSI S1.40 1984 American National Standards Institute Specification for Acoustical Calibrators 49 CFR 229, Appendix I ANSI S1.43 1997 American National Standards Institute Specifications for IntegratingAveraging Sound Level Meters 49 CFR 227.103(c)(2)(ii) ANSI S3.22 (pdf) ANSI S3.22 (html) 2003 American National Standards Institute Specification of Hearing Aid Characteristics 21 CFR 801 ANSI Z35.1 (pdf) ANSI Z35.1 1968 American National Standards Institute Specifications for Accident Prevention Signs 29 CFR 1926 https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 (html) ANSI Z35.1 (svg) ANSI Z35.2 (pdf) ANSI Z35.2 (html) ANSI Z35.2 (svg) 1968 American National Standards Institute Specifications for Accident Prevention Tags 29 CFR 1926 ANSI Z49.1 (pdf) ANSI Z49.1 (html) 1967 American National Standards Institute Safety in Welding and Cutting 29 CFR 1926 ANSI Z87.1 (pdf) ANSI Z87.1 (html) ANSI Z87.1 (svg) 2003 American National Standards Institute Practice for Occupational and Educational Eye and Face Protection 29 CFR 1910 ANSI Z88.2 (pdf) ANSI Z88.2 (html) ANSI Z88.2 (svg) 1992 American National Standards Institute American National Standard for Respiratory Protection 30 CFR 250 ANSI Z89.1 (pdf) ANSI Z89.1 (html) 1969 American National Standards Institute Safety Requirements for Industrial Head Protection 29 CFR 1926 ANSI Z89.2 (pdf) ANSI Z89.2 (html) 1971 American National Standards Institute Industrial Protective Helmets for Electrical Workers 29 CFR 1926 ANSI Z90.4 (pdf) ANSI Z90.4 (html) 1984 American National Standards Institute Protective Headgear for Bicyclists 16 CFR 1203 ANSI Z245.1 (pdf) ANSI Z245.1 (html) ANSI Z245.1 (svg) 1992 American National Standards Institute Mobile Refuse Collection and Compaction--Safety Requirements 40 CFR 243 ANSI Z245.2 (pdf) ANSI Z245.2 (html) 1997 American National Standards Institute Stationary Compactors--Safety Requirements 40 CFR 243 AOAC 1990 AOAC International Official Methods of Analysis (Volume 1) 9 CFR 318.19(b) AOAC 1980 AOAC International Official Methods of Analysis, 1980 21 CFR 131.150(c) APA 87-1 2001 American Pyrotechnics Association Standard for Construction and Approval for Transportation of Fireworks and Novelties 49 CFR 173.56(j)(1) APHA Method 2120 (pdf) APHA Method 2120 (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 141.121 APHA Method 2130 (pdf) APHA Method 2130 (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 141.121 APHA Method 2320 (pdf) APHA Method 2320 (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) APHA Method 2510 (pdf) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 141.121 https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 APHA Method 2510 (html) APHA Method 2550 (pdf) APHA Method 2550 (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 141.121 APHA Method 2580 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 141.121 APHA Method 3111 (pdf) APHA Method 3111 (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 444.12 APHA Method 3112 (pdf) APHA Method 3112 (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 444.12 APHA Method 3113 (pdf) APHA Method 3113 (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 444.12 APHA Method 3114 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 444.12 APHA Method 3120 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 444.12 APHA Method 3500-AS 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 444.12 APHA Method 3500-CA (pdf) APHA Method 3500-CA (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) APHA Method 3500-CD (pdf) APHA Method 3500-CD (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 444.12 APHA Method 3500-CR 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 63.404(a) APHA Method 3500-CU 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 444.12 APHA Method 3500-MG (pdf) APHA Method 3500-MG (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) APHA Method 3500-PB (pdf) APHA Method 3500-PB (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 444.12 APHA Method 3500-ZN (pdf) APHA Method 3500-ZN (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) 1992 https://law.resource.org/pub/us/cfr/manifest.us.html 40 CFR 136.3(a) 12/19/2019 APHA Method 4110 (pdf) APHA Method 4110 (html) American Public Health Association Standard Methods for the Examination of Water and Wastewater APHA Method 4500-CIO2 (pdf) APHA Method 4500-CIO2 (html) 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 21 CFR 165.110(b)(4) (iii)(I)(7)(ii) APHA Method 4500-CL 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 21 CFR 165.110(b)(4) APHA Method 4500-CN 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) APHA Method 4500-F 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) APHA Method 4500-H 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 444.12 APHA Method 4500-NO2 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) APHA Method 4500-NO3 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) APHA Method 4500-O3 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) APHA Method 4500-P 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) APHA Method 4500-S2 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) APHA Method 4500-SI 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 141.121 APHA Method 4500-SO42 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) APHA Method 5540 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 141.121 APHA Method 6651 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 141.121 APHA Method 9215 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 141.121 APHA Method 9221 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) APHA Method 9222 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 APHA Method 9223 1992 American Public Health Association Standard Methods for the Examination of Water and Wastewater 40 CFR 136.3(a) API 2INT-MET 2007 American Petroleum Institute Interim Guidance on Hurricane Conditions in the Gulf of Mexico 30 CFR 250.901(a)(6) API 5L 2004 American Petroleum Institute Specification for Line Pipe 49 CFR 192.113 API 5L1 2002 American Petroleum Institute Recommended Practice for Railroad Transportation of Line Pipe 49 CFR 192.65(a) API 6A 2004 American Petroleum Institute Specification for Wellhead and Christmas Tree Equipment 30 CFR 250.806(a)(3) API 6D 2008 American Petroleum Institute Specification for Pipeline Valves 49 CFR 195.116(d) API 12F 1994 American Petroleum Institute Specification for Shop Welded Tanks for Storage of Production Liquids 49 CFR 195.264(b)(1) API RP 14C 2001 American Petroleum Institute Recommended Practice for Analysis, Design, Installation, and Testing of Basic Surface Safety Systems for Offshore Production Platforms 30 CFR 250.1628(c) API RP 14F 2008 American Petroleum Institute Recommended Practice for Design and Installation of Electrical Systems for Offshore Production Platforms 30 CFR 250.114(c) API 17J 2008 American Petroleum Institute Specification for Unbonded Flexible Pipe 30 CFR 250.1002(b)(4) API 80 2000 American Petroleum Institute Guidelines for the Definition of Onshore Gas Gathering Lines 49 CFR 192.8(a) API 510 2006 American Petroleum Institute Pressure Vessel Inspection Code 30 CFR 250.803(b)(1) API 620 2002 American Petroleum Institute Design and Construction of Large Welded Low Pressure Storage Tanks 49 CFR 195.264(e)(3) API 650 2007 American Petroleum Institute Welded Steel Tanks for Oil Storage 195.132(b)(3) API 651 1997 American Petroleum Institute Cathodic Protection of Aboveground Petroleum Storage Tanks 49 CFR 195.565 API 652 1997 American Petroleum Institute Lining of Aboveground Petroleum Storage Tank Bottoms 49 CFR 195.579(d) API 653 2003 American Petroleum Institute Tank Inspection, Repair, Alteration, and Reconstruction 49 CFR 195.432(b) API 1104 1999 American Petroleum Institute Standard for Welding Pipelines and Related Facilities 49 CFR 195.214(a) API 1130 2002 American Petroleum Institute Computational Pipeline Monitoring 49 CFR 195.444 API 1162 2003 American Petroleum Institute Public Awareness Programs for Pipeline Operators 49 CFR 192.616(a) API 2000 1998 American Petroleum Institute Venting Atmospheric and LowPressure Storage Tanks 49 CFR 195.264(e)(2) API 2003 1998 American Petroleum Institute Protection Against Ignitions Arising Out of Static, Lightning, and Stray Currents 49 CFR 195.405(a) https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 API 2350 2005 American Petroleum Institute Overfill Protection for Storage Tanks in Petroleum Facilities 49 CFR 195.428(c) API 2510 2001 American Petroleum Institute Design and Construction of LPG Installations 49 CFR 195.205(b)(3) API RP 14G 2007 American Petroleum Institute Recommended Practice for Fire Prevention and Control on Open Type Offshore Production Platforms 30 CFR 250.803(b)(9) (v) APLIC 1996 Avian Power Line Interaction Committee Suggested Practices for Raptor Protection on Power Lines: The State of the Art in 1996 7 CFR 1724.52(a)(1)(i) APSP 16 2011 Association of Pool and Spa Professionals Standard Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and Hot Tubs 16 CFR 1450.3 ARMA 1984 Asphalt Roofing Manufacturers Association Residential Asphalt Roofing Manual 24 CFR 200, Subpart S ASME B16.9 2003 American Society of Mechnical Engineers Factory Made Wrought Steel Buttwelding Fittings 49 CFR 195.118(a) ASME B30.2 (pdf) ASME B30.2 (html) ASME B30.2 (svg) 2005 American Society of Mechanical Engineers Safety Requirements for Overhead and Gantry Cranes 29 CFR 1926 ASME B30.5 (pdf) ASME B30.5 (html) 2004 American Society of Mechanical Engineers Safety Requirements for Mobile and Locomotive Cranes 29 CFR 1926 ASME B30.7 (pdf) ASME B30.7 (html) 2001 American Society of Mechanical Engineers Safety Requirements for BaseMounted Drum Hoists 29 CFR 1926 ASME B30.14 (pdf) ASME B30.14 (html) ASME B30.14 (svg) 2004 American Society of Mechanical Engineers Safety Requirements for Side Boom Tractors 29 CFR 1926 ASME B31.4 2002 American Society of Mechnical Engineers Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids 49 CFR 195.110(a) ASME B31.8 2003 American Society of Mechnical Engineers Gas Transmission and Distribution Piping Systems 49 CFR 192.619(a)(1)(i) ASME B318S 2004 American Society of Mechanical Engineers Managing System Integrity of Gas Pipelines 49 CFR 192.903(c) ASME B31G 1991 American Society of Mechanical Engineers Manual for Determining the Remaining Strength of Corroded Pipelines 49 CFR 192.485(c) ASME UPV 1943 American Society of Mechanical Engineers Code for Unfired Pressure Vessels 49 CFR 173.32(c)(4) ASQC Q9001 1994 American Society for Quality Control Quality Assurance in Design, Development, Production, Installation, and Servicing 33 CFR 96.430(a)(2)(ii) ASQC Q9002 1994 American Society for Quality Control Quality Systems -- Model for Quality Assurance in Production, Installation, and Servicing 24 CFR 200.935(d)(4) (ii)(A)(3) https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 ASQC Q9003 1994 American Society for Quality Control Quality Systems - Model for Quality Assurance in Final Inspection and Test 24 CFR 200.935(d)(4) (ii)(A)(4) ASQC Q9004-1 1994 American Society for Quality Control Quality Management and Quality Systems Elements-Guidelines 24 CFR 200.935(d)(4) (ii)(A)(5) ASSE 1001 1990 American Society of Sanitary Engineering Performance Requirements for Pipe Applied Atmospheric Type Vacuum Breakers 24 CFR 3280.604(b)(2) ASSE 1006 (pdf) ASSE 1006 (html) 1986 American Society of Sanitary Engineering Plumbing Requirements for Residential Use (Household) Dishwashers 24 CFR 3280.604(b)(2) ASSE 1007 (pdf) ASSE 1007 (html) 1986 American Society of Sanitary Engineering Performance Requirements for Home Laundry Equipment 24 CFR 3280.604(b)(2) ASSE 1008 (pdf) ASSE 1008 (html) 1986 American Society of Sanitary Engineering Performance Requirements for Household Food Waste Disposer Units 24 CFR 3280.604(b)(2) ASSE 1016 1988 American Society of Sanitary Engineering Performance Requirements for Individual Thermostatic Pressure Balancing and Combination Control for Bathing Facilities 24 CFR 3280.604(b)(2) ASSE 1023 (pdf) ASSE 1023 (html) 1979 American Society of Sanitary Engineering Hot Water Dispensers, Household Storage Type, Electrical 24 CFR 3280.604(b)(2) ASSE 1025 1978 American Society of Sanitary Engineering Diverters for Plumbing Faucets with Hose Spray, Anti-Siphon Type, Residential Applications 24 CFR 3280.604(b)(2) ASSE 1037 (pdf) ASSE 1037 (html) 1990 American Society of Sanitary Engineering Performance Requirements for Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures 24 CFR 3280.604(b)(2) ASCE 7 2002 American Society of Civil Engineers Minimum Design Loads for Buildings and Other Structures 49 CFR 193.2013 ATAA 300 1996 Air Transport Association of America Packaging of Airline Supplies, Revision 19 49 CFR 171.7 AWPA A1 1991 American Wood Preservers Association Standard Methods for Analysis of Creosote and Oil-Type Preservatives 7 CFR 1728.201(i)(1)(i) AWPA A2 1991 American Wood Preservers Association Standard Methods for Analysis of Waterborne Preservatives and FireRetardant Formulations 7 CFR 1728.201(i)(1)(iii) (A) AWPA A3 1991 American Wood Preservers Association Standard Methods for Determining Penetration of Preservatives and Fire Retardants 7 CFR 1728.201(k)(3) AWPA A5 1991 American Wood Preservers Association Standard Methods for Analysis of Oil-Borne Preservatives 7 CFR 1728.202(g)(1) (v)(B) AWPA A6 1989 American Wood Preservers Association Method for the Determination of Oil-Type Preservatives and Water in Wood 7 CFR 1728.202(g)(1) (v)(A) AWPA A7 1975 American Wood Preservers Association Standard Wet Ashing Procedure for Preparing Wood for Chemical Analysis 7 CFR 1728.202(g)(1) (v)(D) AWPA A9 1990 American Wood Preservers Association Standard Method for Analysis of Treated Wood and Treating Solutions by X-ray Spectroscopy 7 CFR 1728.202(g)(1) (v)(C) AWPA A11 1983 https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 American Wood Preservers Association Standard Method for Analysis of Treated Wood and Treating Solutions by Atomic Absorption Spectroscopy 7 CFR 1728.201(i)(1)(iii) (B) AWPA M3 1981 American Wood Preservers Association Standard Quality Control Procedures for Wood Preserving Plants 7 CFR 1728.202(f)(1) AWPA P1 1991 American Wood Preservers Association Standard for Coal Tar Creosote for Land and Fresh Water and Marine (Coastal) Water Use 7 CFR 1728.201(i)(1)(i) AWPA P5 1991 American Wood Preservers Association Standard for Waterborne Preservative 7 CFR 1728.201(i)(1)(iii) (A) AWPA P8 1991 American Wood Preservers Association Standard for Oil-Borne Preservatives 7 CFR 1728.201(i)(1)(iv) AWPA P9 1991 American Wood Preservers Association Standard for Solvents and Formulations for Organic Preservative Systems 7 CFR 1728.201(i)(1)(iv) AWS B3.0 1977 American Welding Society Standard Qualification Procedure 49 CFR 178.356-2(e) AWS D1.1 2000 American Welding Society Structural Welding Code--Steel 30 CFR 250.901(a)(20) BHMA A156.10 1999 Builders Hardware Manufacturers Association Power Operated Pedestrian Doors 36 CFR 1191, App B, 105.2.1 BHMA A156.19 2002 Builders Hardware Manufacturers Association Power Assist and Low Energy Power Operated Doors 36 CFR 1191, App B, 408.3.2.1 BOCA 1993 Building Officials and Code Administrators International Mechanical Code 24 CFR 200.925c(a)(1) (i) BOCA 1993 Building Officials and Code Administrators International Plumbing Code 24 CFR 200.925c(a)(1) (i) BSI EN-13000 (pdf) BSI EN-13000 (html) 2004 British Standards Institute Cranes--Safety--Mobile Cranes 29 CFR 1926 BSI EN-14439 (pdf) BSI EN-14439 (html) 2006 British Standards Institute Cranes--Safety--Tower Cranes 29 CFR 1926 CEC Test Method 2004 California Energy Commission Calculating the Energy Efficiency of Single-Voltage External Ac-Dc and Ac-Ac Power Supplies 10 CFR 430 Subpart B CABO 1992 Council of American Building Officials One and Two Family Dwelling Code 24 CFR 200.926b(c) CABO 1993 Council of American Building Officials One and Two Family Dwelling Code with Errata Package and 1993 Amendments 24 CFR 200.926(d)(1) (ii)((B)(2)(ii) CFTA 1977 Cosmetic, Toiletry, and Fragrance Association Cosmetic Ingredient Dictionary 21 CFR 701.3(c)(2)(i) CGA C-5 1991 Compressed Gas Association Cylinder Service Life-Seamless Steel High Pressure Cylinders 49 CFR 173.302a(b)(3) (i)(A) CGA C-8 1985 Compressed Gas Association Standard for Requalification of DOT-3HT Cylinders 49 CFR 180.205(f)(1) https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 CGA C-11 2001 Compressed Gas Association Recommended Practice for Inspection of Compressed Gas Cylinders at Time of Manufacture 49 CFR 178.35(g) CGA C-12 1994 Compressed Gas Association Qualification Procedure for Acetylene Cylinder Design 49 CFR 173.303(a) CGA C-13 2000 Compressed Gas Association Guidelines for Periodic Visual Inspection and Requalification of Acetylene Cylinders 49 CFR 173.303(e) CGA G-1 2009 Compressed Gas Association Acetylene 29 CFR 1910.102(a) CGA G-2.2 1985 Compressed Gas Association Guideline Method for Determining Minimum of 0.2% Water in Anhydrous Ammonia 49 CFR 173.315(l)(5) CGA G-4.1 1985 Compressed Gas Association Cleaning Equipment for Oxygen Service 49 CFR 178.338-15 CGA P-1 1965 Compressed Gas Association Safe Handling of Compressed Gases 29 CFR 1910.101(b) CGA P-20 2003 Compressed Gas Association Standard for the Classification of Toxic Gas Mixtures 49 CFR 173.115 CGA S-1.1 2005 Compressed Gas Association Pressure Relief Device Standards 49 CFR 173.301(c) CGA S-1.2 1980 Compressed Gas Association Safety Release Device Standard-Cargo and Portable Tanks for Compressed Gases 49 CFR 178.277(e)(4) (iv) CGA S-7 (pdf) CGA S-7 (html) 2005 Compressed Gas Association Method for Selecting Pressure Relief Devices for Compressed Gas Mixtures in Cylinders 49 CFR 173.301(c) CGA TB-2 1980 Compressed Gas Association Guidelines for Inspection and Repair of MC-330 and MC-331 Cargo Tanks 49 CFR 180.407(g)(3) CGA TB-25 2008 Compressed Gas Association Design Considerations for Tube Trailers 49 CFR 173.301 CGSB 43.147 2005 Canadian General Standards Board Construction, Modification, Qualification, Maintenance, and Selection and Use of Means of Containment for the Handling, Offering for Transport, or Transportation of Dangerous Goods by Rail 49 CFR 171.12 CGSB 43.147 2005 Office des Normes Generales du Canada Construction, Modification, Qualification, Entretien, Selection Et Utilisation Des Contenants Pour La Manutention, La Demande De Transport Ou La Transport Des Marchandises Dangereuses Par Chemin De Fer 49 CFR 171.12 CI 57 2009 Chlorine Institute Emergency Shut-Off Systems for Bulk Transfer of Chlorine 49 CFR 177.840(u) CI 101-7 1993 Chlorine Institute Excess Flow Valve with Removable Seat 49 CFR 178.276(c)(7)(i) CI 104-9 2002 Chlorine Institute Standard Chlorine Angle Valve Assembly 49 CFR 178.337-9(b)(8) CI 106-6 1993 Chlorine Institute Excess Flow Valve with Removable Baskets 49 CFR 178.276(c)(7)(ii) CI 166 2002 Chlorine Institute Angle Valve Guidelines for Chlorine Bulk Transportation 49 CFR 178.337-9(b)(8) https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 CI H50155 1996 Chlorine Institute Pressure Relief Device for Chlorine Service 49 CFR 173.315(i)(13) CI H51970 1996 Chlorine Institute Safety Valve for Chlorine Service 49 CFR 173.315(i)(13) CI 2009 Chlorine Institute Chlorine Institute Emergency Kit A for 100-lb. and 150-lb. Chlorine Cylinders 49 CFR 173.3(e)(1) CI 2009 Chlorine Institute Chlorine Institute Emergency Kit B for Chlorine Ton Containers 49 CFR 173.3(e)(1) CIE 15 2004 International Commission on Illumination Technical Report: Colorimetry, 3rd edition 10 CFR 430 Subpart B, App. R, 4.1.1 CIE 15A (xls) 2004 International Commission on Illumination Supplementary Spectra 10 CFR 430 Subpart B, App. R, 4.1.1 CIE 15B (xls) 2004 International Commission on Illumination Supplementary Tables 10 CFR 430 Subpart B, App. R, 4.1.1 CRA A-20 1986 Corn Refiners Association Analysis for Starch in Corn 7 CFR 801.7(a)(2) CSA C390 1993 Canadian Standards Association Energy Efficiency Test Methods for Three-Phase Induction Motors 10 CFR 431.19(b)(4) CTIOA R8-10362 1969 Ceramic Tile Institute of America Standard Specifications for the Installation of Tile Lined Shower Receptors 24 CFR 200, Subpart S CSVA 2004 Commercial Vehicle Safety Alliance North American Standard Out-ofService Criteria and Level VI Inspection Procedures and Out-ofService Criteria for Commercial Highway Vehicles 49 CFR 385.415(b)(1) EI IP-501 2005 Energy Institute Determination of aluminum, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil 40 CFR 1065.705 Table 1 FGMA 1990 Flat Glass Marketing Association Glazing Manual 24 CFR 200, Subpart S GLI METHOD 2 2009 Great Lakes Instruments Turbidity 40 CFR 141.74(a)(1) GPA 2261 2000 Gas Producers Association Analysis of Natural Gas and Similar Gaseous Mixtures by Gas Chromatography 40 CFR 75, Appendix F, Section 5.5.2 GPA 2261 2000 Gas Processors Association Analysis of Natural Gas and Similar Gaseous Mixtures by Gas Chromatography 40 CFR 75, Appendix F GPA 2377 1986 Gas Processors Association Test for Hydrogen Sulfide and Carbon Dioxide in Natural Gas Using Length of Stain Tubes 40 CFR 60.334(h)(1) GRI 02-0057 2002 Gas Research Institute Internal Corrosion Direct Assessment of Gas Transmission Pipelines Methodology 49 CFR 192.927(c)(2) HACH 8000 2007 Hach Chemical Company Oxygen Demand, Chemical Using Reactor Digestion Method 40 CFR 136.3(a) HACH 8008 2007 Hach Chemical Company 1, 10--Phenanthroline Method Using FerroVer Iron Reagent for Water 40 CFR 136.3(a) HACH 8009 2007 https://law.resource.org/pub/us/cfr/manifest.us.html 40 CFR 444.12(b)(1) 12/19/2019 Hach Chemical Company Zincon Method for Zinc, Hatch Handbook of Water Analysis HACH 8034 2007 Hach Chemical Company Periodate Oxidation Method for Manganese 40 CFR 136.3(a) HACH 8507 2007 Hach Chemical Company Nitrogen Nitrite--Low Range, Diazotization Method for Water and Wastewater 40 CFR 136.3(a) HI BTS-2000 2007 Hydronics Institute Method to Determine Efficiency of Commercial Space Heating Boilers 10 CFR 431.86 HPMA HP-SG-96 1996 Hardwood Plywood Manufacturers Association Structural Design Guide for Hardwood Plywood Wall Panels 24 CFR 3280.304(b)(1) IAPMO PS-2 1989 International Association of Plumbing and Mechanical Officials Material and Property Standard for Cast Brass and Tubing P-Traps 24 CFR 3280.604(b)(2) IAPMO PS-5 1984 International Association of Plumbing and Mechanical Officials Material and Property Standard for Special Cast Iron Fittings 24 CFR 3280.604(b)(2) IAPMO PS-9 1984 International Association of Plumbing and Mechanical Officials Material and Property Standard for Diversion Tees and Twin Waste Elbow 24 CFR 3280.604(b)(2) IAPMO PS-14 1989 International Association of Plumbing and Mechanical Officials Material and Property Standard for Flexible Metallic Water Connectors 24 CFR 3280.604(b)(2) IAPMO PS-23 1989 International Association of Plumbing and Mechanical Officials Material and Property Standard for Dishwasher Drain Airgaps 24 CFR 3280.604(b)(2) IAPMO PS-31 1977 International Association of Plumbing and Mechanical Officials Material and Property Standard for Backflow Prevention Devices 24 CFR 3280.604(b)(2) ICAO 9284 2011 International Civil Aviation Organization Technical Instructions for the Safe Transport of Dangerous Goods by Air 49 CFR 171.7 ICAO Annex 2 1990 International Civil Aviation Organization Convention on International Civil Aviation, Rules of the Air 14 CFR 135.3(a)(2) ICAO Annex 16 2008 International Civil Aviation Organization Environmental Protection, Volume II -- Aircraft Engine Emissions 40 CFR 87.89 ICBO 1991 International Conference of Building Officials Uniform Building Code (1991) 24 CFR 200.925c(a)(1) (iii) ICBO 1991 International Conference of Building Officials Uniform Mechanical Code (1991) 24 CFR 200.925c(c)(3) ICEA S-87-640 2006 Insulated Cable Engineers Association Standard for Optical Fiber Outside Plant Communications Cable 7 CFR 901(c) ICEA S-110-717 2003 Insulated Cable Engineers Association Standard for Optical Drop Cable 7 CFR 901(c) ICS 1973 International Chamber of Shipping Clean Seas Guide for Oil Tankers 33 CFR 157.23(b) IEEE 45 2002 https://law.resource.org/pub/us/cfr/manifest.us.html 46 CFR 110.10-1 12/19/2019 Institute of Electrical and Electronics Engineers Recommended Practice for Electrical Installations on Shipboard IEEE 112 2004 Institute of Electrical and Electronics Engineers Test Procedure for Polyphase Induction Motors and Generators 10 CFR 431.15 IEEE 114 2010 Institute of Electrical and Electronics Engineers IEEE Standard Test Procedure for Single-Phase Induction Motors 10 CFR 431 IEEE 1202 (pdf) IEEE 1202 (html) 1991 Institute of Electrical and Electronics Engineers Standard for Flame Testing of Cables 46 CFR 111 IEEE C2 1997 Institute of Electrical and Electronics Engineers National Electrical Safety Code 7 CFR 1755.503(d)(1) IEEE C2 2007 Institute of Electrical and Electronics Engineers National Electrical Safety Code (2007) 7 CFR 1755.901(b) IEEE C37.14 2002 Institute of Electrical and Electronics Engineers Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures 46 CFR 110.10-1 IEEE P730.1 1989 Institute of Electrical and Electronics Engineers Standard for Software Quality Assurance Plans 7 CFR 1755.522(n)(2) IESNA LM-45 2000 Illuminating Engineering Society of North America Method for Electrical and Photometric Measurements of General Service Incandescent Filament Lamps 10 CFR 430 Subpart B IME 22 2011 Institute of Makers of Explosives Recommendations for the Safe Transportation of Detonators in a Vehicle with Certain Other Explosive Materials 30 CFR 57.6133(b) IME 1940 Institute of Makers of Explosives Safety in the Handling and Use of Explosives 29 CFR 1910.261(a)(4) (iii) IMO IMDG.1 2006 International Maritime Organization International Maritime Dangerous Goods Code (Volume 1) 49 CFR 172.519(f) IMO IMDG.2 2006 International Maritime Organization International Maritime Dangerous Goods Code (Volume 2) 49 CFR 172.519(f) IMO ISPS 2003 International Maritime Organization International Ship and Port Facility Security Code 33 CFR 101.410(a) AG ENG 1965 Interstate Printers and Publishers, Inc. Agriculture Engineering 29 CFR 570.71(b) ISO 535 1991 International Organization for Standardization Paper and Board--Determination of Water Absorptiveness--Cobb Method 49 CFR 178.516(b)(1) ISO 1496-1 1990 International Organization for Standardization Series 1 Freight Containers-Specification and Testing--Part 1, General Cargo Containers 49 CFR 173.411(b)(6) (iii) ISO 1496-3 1995 International Organization for Standardization Series 1 Freight Containers-Specification and Testing--Part 3, Tank containers for Liquids, Gases and Pressurized Dry Bulk 49 CFR 178.74(c)(5)(ii) ISO 3807-2 2000 International Organization for Standardization Cylinders for acetylene--Basic requirements--Part 2: Cylinders with fusible plugs 49 CFR 173.303(f)(1) 2005 https://law.resource.org/pub/us/cfr/manifest.us.html 49 CFR 180 12/19/2019 ISO 6406 (pdf) ISO 6406 (html) International Organization for Standardization Seamless Steel Gas Cylinders-Inspection and Testing ISO 7225 2005 International Organization for Standardization Gas Cylinders--Precautionary Labels 49 CFR 178.71(r)(2) ISO 7866 1999 International Organization for Standardization Gas Cylinders--Refillable Seamless Aluminum Alloy Gas Cylinders-Design, Construction and Testing 49 CFR 178.71(h) ISO 8115 1986 International Organization for Standardization Cotton bales—Dimensions and density 49 CFR 171.7 ISO 9809-1 1999 International Organization for Standardization Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 1: Quenched and Tempered Steel Cylinders with Tensile Strength less than 1 100 MPa 49 CFR 178.71(g)(1) ISO 9809-2 2000 International Organization for Standardization Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 2: Quenched and Tempered Steel Cylinders with Tensile Strength Greater than or Equal to 1 100 MPa 49 CFR 178.71(g)(2) ISO 9809-3 2000 International Organization for Standardization Gas Cylinders--Refillable Seamless Steel Gas Cylinders--Design, Construction and Testing--Part 3: Normalized Steel Cylinders 49 CFR 178.71(g)(3) ISO 9978 1992 International Organization for Standardization Sealed Radioactive Sources--Leak Test Methods 49 CFR 173.469(a)(4) (ii) ISO 10297 1999 International Organization for Standardization Gas cylinders--Refillable gas cylinder valves--Specification and type testing 49 CFR 173.301b(c)(1) ISO 10461 (pdf) ISO 10461 (html) 2005 International Organization for Standardization Seamless Aluminum Alloy Gas Cylinders--Inspection and Testing 49 CFR 180 ISO 10462 (pdf) ISO 10462 (html) 2005 International Organization for Standardization Transportable Cylinders for Dissolved Acetylene 49 CFR 180 ISO 11114-1 1997 International Organization for Standardization Transportable gas cylinders-Compatibility of cylinder and valve materials with gas contents--Part 1: Metallic materials 49 CFR 173.301b(a)(2) ISO 11114-2 2000 International Organization for Standardization Transportable gas cylinders-Compatibility of cylinder and valve materials with gas contents--Part 2: Non- metallic materials 49 CFR 173.301b(a)(2) ISO 11117 1998 International Organization for Standardization Gas cylinders--Valve protection caps and valve guards for industrial and medical gas cylinders--Design, construction and tests 49 CFR 173.301b(c)(2) (ii) ISO 11118 1999 International Organization for Standardization Gas cylinders--Non-refillable metallic gas cylinders--Specification and test methods 49 CFR 178.71(i) ISO 11119-1 2002 International Organization for Standardization Gas cylinders--Gas cylinders of composite construction-Specification and test methods-- 49 CFR 171.7 https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 Part 1: Hoop-wrapped composite gas cylinders ISO 11119-2 2002 International Organization for Standardization Gas cylinders—Gas cylinders of composite construction—Specification and test methods—Part 2: Fully wrapped fibre reinforced composite gas cylinders with load-sharing metal liners 49 CFR 171.7 ISO 11119-3 2002 International Organization for Standardization Gas cylinders of composite construction--Specification and test methods--Part 3: Fully wrapped fibre reinforced composite gas cylinders with non-load-sharing metallic or non-metallic liners 49 CFR 171.7 ISO 11120 1999 International Organization for Standardization Gas cylinders--Refillable seamless steel tubes of water capacity between 150 L and 3000 L-Design, construction and testing 49 CFR 178.71(j) ISO 11621 1997 International Organization for Standardization Gas cylinders--Procedures for change of gas service 49 CFR 173.301b(a)(2) ISO 11623 (pdf) ISO 11623 (html) 2002 International Organization for Standardization Periodic Inspection and Testing of Composite Gas Cylinders 49 CFR 180 ISO 11660-1 (pdf) ISO 11660-1 (html) 2008 International Organization for Standardization Cranes: Access, Guards and Restraints: General 29 CFR 1926 ISO 11660-2 (pdf) ISO 11660-2 (html) 1994 International Organization for Standardization Cranes: Access, Guards and Restraints: Mobile Cranes 29 CFR 1926 ISO 11660-3 (pdf) ISO 11660-3 (html) 2008 International Organization for Standardization Cranes: Access, Guards and Restraints: Tower Cranes 29 CFR 1926 ISO 14230-4 2000 International Organization for Standardization Road Vehicles--Diagnostic Systems 40 CFR 1048.110(g)(2) ISO 18902 (pdf) ISO 18902 (html) 2001 International Organization for Standardization Photographic Processed Films, Plates, and Papers 36 CFR 1237 ISO 18906 (pdf) ISO 18906 (html) 2000 International Organization for Standardization Photographic Films--Specifications for Safety Film 36 CFR 1237 ITU-R M-493-11 2004 International Telecommunication Union Digital Selective-calling System for Use in the Maritime Mobile Service, with Annexes 1 and 2 47 CFR 80.1101(c)(2)(ii) ITU-R M-541-8 1997 International Telecommunication Union Operational Procedures for the Use of Digital Selective-Calling Equipment in the Maritime Mobile Service 47 CFR 80.1101(c)(4) (iii) ITU-R M-541-9 2004 International Telecommunication Union Operational Procedures for the Use of Digital Selective-Calling Equipment in the Maritime Mobile Service 47 CFR 80.1101(c)(2) (iii) ITU-R M-628-3 1994 https://law.resource.org/pub/us/cfr/manifest.us.html 47 CFR 80.1101(c)(6)(ii) 12/19/2019 International Telecommunication Union Technical Characteristics for Search and Rescue Radar Transponders ITU-R M-632-3 1997 International Telecommunication Union Transmission Characteristics of a Satellite Emergency Position Indicating Radio Beacon 47 CFR 80.1101(c)(11) (iii) ITU-R M-633-3 2004 International Telecommunication Union Transmission characteristics of a satellite emergency positionindicating radiobeacon system operating through a low polarorbiting satellite system 47 CFR 80.1101(c)(5) (iii) ITU-R M-1371-1 2001 International Telecommunication Union Technical Characteristics for a Universal Shipborne Automatic Identification System Using Time Division Multiple Access 47 CFR 80.1101(c)(12) (i) ITU-T E.161 2001 International Telecommunication Union Arrangement of Digits, Letters and Symbols on Telephones and Other Devices that Can Be Used for Gaining Access to a Telephone Network 47 CFR 80.1101(b)(2) ITU-T E.164.1 2008 International Telecommunication Union Numbering Plan of the International Telephone Service 47 CFR 80.1101(b)(3) LACHAT 10-204 2008 Lachat Instruments Digestion and Distillation of Total Cyanide in Drinking and Wastewaters 40 CFR 136.3(a) Table IB STEAM 1917 Commonwealth of Massachusetts District Police Steam Boiler Rules MSS SP-44 1996 Manufacturers Standardization Society Steel Pipe Line Flanges 46 CFR 56.01-2 MSS SP-75 2004 Manufacturers Standardization Society Specification for High-Test Wrought Butt Welding Fittings 49 CFR 118(a) NACE RP-0502 2002 National Association of Corrosion Engineers Pipeline External Corrosion Direct Assessment Methodology 49 CFR 192.925(b)(3) NACM 2003 National Association of Chain Manufacturers Welded Steel Chain Specifications 49 CFR 393.104(e)(2) NAS 1972 National Academy of Sciences Food Chemicals Codex (1972) 21 CFR 701.3(c)(2)(iv) NAS 1996 National Academy of Sciences Food Chemicals Codex (1996) 21 CFR 184 NAS 2011 National Academy of Sciences Prudent Practices in the Laboratory: Handling and Disposal of Chemicals 42 CFR 52b.12(c)(6) NCASI 98-01 1998 National Council of the Paper Industry for Air and Stream Improvements Chilled Impinger Method For Use At Wood Products Mills to Measure Formaldehyde, Methanol, and Phenol 40 CFR 63, Subpart DDDD NCASII 94-03 2002 National Council of the Paper Industry for Air and Stream Improvements Methanol in Process Liquids by Gas Chromatography/Flame Ionization Detection 40 CFR 63.457(c)(3)(ii) NCASI A105 2001 National Council of the Paper Industry for Air and Stream Improvements Impinger Source Sampling Method for Selected Aldehydes, Ketones, and Polar Compounds 40 CFR 63, Subpart DDDD https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 NCASI 99-02 2002 National Council of the Paper Industry for Air and Stream Improvements Impinger/Canister Source Sampling Method For Selected HAPs and Other Compounds at Wood Products Facilities 40 CFR 63, Subpart DDDD NCCA 2011 National Cotton Council of America Specifications for Cotton Bale Packaging Material 7 CFR 1427.5(b)(10) UCC 2002 National Conference of Commissioners on Uniform State Laws 2002 Official Text and Comments, Sections 8–102 and 8-103 17 CFR 270.17f-4(c)(1) UCC 2002 National Conference of Commissioners on Uniform State Laws 2002 Official Text and Comments, Sections 8–501 through 8–511 17 CFR 270.17f-4(c)(1) NCUTLO 1969 National Committee on Uniform Traffic Laws and Ordinances Uniform Vehicle Code and Model Ordinance 41 CFR 50-204.75 NACHA 2005 National Automated Clearing House Association A Complete Guide to the Rules Governing the ACH Network 45 CFR 162.920 ISS-MCB 2011 International Space Station Multilateral Coordination Board International Docking Standard 1 Code of Intergalactic Regulations 32 NCRP 33 1968 National Council on Radiation Protection and Measurement Medical X-ray and Gamma-Ray Protection for Energies Up to 10 MeV--Equipment Design and Use 42 CFR 37.43 NCRP 48 1976 National Council on Radiation Protection and Measurement Medical Radiation Protection for Medical and Allied Health Personnel 42 CFR 37.43 NCRP 49 1976 National Council on Radiation Protection and Measurement Structural Shielding Design and Evaluation for Medical Use of X-Rays and Gamma-Rays up to 10 MeV 42 CFR 37.43 NEMA MG-1 2009 National Electrical Manufacturers Association Motors and Generators 10 CFR 431 NSF 61 (pdf) NSF 61 (html) 2001 National Sanitation Foundation Drinking Water System Components--Health Effects 24 CFR 3280 OECD 404 2002 Organization for Economic Cooperation and Development Guideline for Testing of Chemicals, Acute Dermal Irritation/Corrosion 49 CFR 173.137 OECD C93 1974 Organization for Economic Cooperation and Development Green List of Wastes 40 CFR 262.89(e) OR REG 1975 State of Oregon Oregon Grade Standards Hazelnuts in Shell 7 CFR 982.45(a) ORION 1970 ORION Research Incorporated Residual Chlorine Electrode Model 97-70 40 CFR 136.3(a) Table IB PCI MNL-121 1977 Precast/Prestressed Concrete Institute Manual for Structural Design of Architectural Precast Concrete 24 CFR 200, Subpart S PCI MNL-117-77 1977 Precast/Prestressed Concrete Institute Manual for Quality Control for Plants and Production of Architectural Precast Concrete Products 24 CFR 200, Subpart S PCSA 1 1968 Power Crane and Shovel Association Mobile Crane and Excavator Standards 29 CFR 1926.602(b)(3) PCSA 2 1968 Power Crane and Shovel Association Mobile Hydraulic Crane Standards 29 CFR 1926.602(b)(3) https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 PCSA 3 1969 Power Crane and Shovel Association Mobile Hydraulic Excavator Standards 29 CFR 1926.602(b)(3) PPI TR-3 2004 Plastics Pipe Institute Policies and Procedures for Developing Hydrostatic Design Bases (HDB), Pressure Design Bases (PDB), and Minimum Required Thermoplastic Piping Materials 49 CFR 192.121 RTCM C071 1995 Radio Technical Commission for Maritime Services Recommended Standards for Marine Radar Equipment Installed on Ships of Less Than 300 Tons Gross Tonnage 33 CFR 164.72(a)(1)(i) (B) RTCM C191 1993 Radio Technical Commission for Maritime Services Recommended Standards for Marine Radar Equipment Installed on Ships of 300 Tons Gross Tonnage and Upwards 33 CFR 164.72(a)(1)(iii) (B) SAE Paper 770141 1977 Society of Automotive Engineers Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts 40 CFR 1065.360(c) SAE J4C 1965 Society of Automotive Engineers Motor Vehicle Seat Belt Assembly 29 CFR 1928.51(b)(2) (ii) SAE J30 1998 Society of Automotive Engineers Fuel and Oil Hoses 40 CFR 1051.501(c)(2) SAE J166 1971 Society for Automotive Engineering Minimum Performance Criteria for Brake Systems for Off-Highway Trucks and Wagons 29 CFR 1926.602(a)(4) SAE J166 1971 Society of Automotive Engineers Minimum Performance Criteria for Brake Systems for Off-Highway Trucks and Wagons 29 CFR 1926.602(a)(4) SAE J167 1970 Society for Automotive Engineering Protective Frame with Overhead Protection 29 CFR 1926.1003(g) SAE J167 1974 Society of Automotive Engineers Protective Frame with Overhead Protection 30 CFR 77.403-1(d)(1) (v) SAE J168 1970 Society for Automotive Engineering Protective Enclosures--Test Procedures and Performance Requirements 29 CFR 1926.1002(a) (5)(i) SAE J185 1988 Society of Automotive Engineers Recommended Practice for Access Systems for Off-Road Machines 29 CFR 1910.266(f)(5) (i) SAE J186A 1977 Society of Automotive Engineers Supplemental High Mounted Stop and Rear Turn Signal Lamps 49 CFR 571.108 SAE J211-1 (pdf) SAE J211-1 (html) 1995 Society of Automotive Engineers Instrumentation for Impact Test 49 CFR 571 SAE J211 1971 Society of Automotive Engineers Instrumentation for Impact Tests 49 CFR 571.222 S6.6.2 SAE J222 1970 Society of Automotive Engineers Parking Lamps (Position Lamps) 49 CFR 571.108 S5.1.1.6 SAE J231 1971 Society for Automotive Engineering Minimum Performance Criteria for Falling Object Protective Structures (FOPS) 30 CFR 77.403(a) SAE J231 1971 Society of Automotive Engineers Minimum Performance Criteria for Falling Object Protective Structures (FOPS) 30 CFR 77.403(a) SAE J231 1981 Society of Automotive Engineers https://law.resource.org/pub/us/cfr/manifest.us.html 29 CFR 1910.266(f)(3) (iii) 12/19/2019 Minimum Performance Criteria for Falling Object Protective Structures (FOPS) SAE J236 1971 Society for Automotive Engineering Minimum Performance Criteria for Brake Systems for Rubber Tire Self-Propelled Graders 29 CFR 1926.602(a)(4) SAE J237 1971 Society for Automotive Engineering Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Front End Loaders and Dozers 29 CFR 1926.602(a)(4) SAE J244 1983 Society for Automotive Engineering Recommend Practice for Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines 40 CFR 92.108(a)(3) SAE J319 1971 Society of Automotive Engineers Minimum Performance Criteria for Brake Systems for Off-Highway Rubber-Tired Self-Propelled Scrapers 29 CFR 1926.602(a)(4) SAE J320 1972 Society for Automotive Engineering Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Self-Propelled Scrapers 29 CFR 1926.1001(h) SAE J320A 1969 Society of Automotive Engineers Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Self-Propelled Scrapers 30 CFR 77.403-1(d)(1) (i) SAE J321 1970 Society of Automotive Engineers Fenders for Pneumatic-Tired Earthmoving Haulage Equipment 29 CFR 1926.602(a)(5) SAE J333 1970 Society for Automotive Engineering Operation Protection for WheelType Agricultural and Industry Tractors 29 CFR 1926.602(a)(2) SAE J334 1968 Society of Automotive Engineers Protective Frame Test Procedures and Performance Requirements 30 CFR 77.403-1(d)(1) (vi) SAE J334 1970 Society for Automotive Engineering Protective Frame Test Procedures and Performance Requirements 30 CFR 77.403-1(d)(1) (vi) SAE J386 1969 Society of Automotive Engineers Operator Restraint Systems for OffRoad Work Machines 29 CFR 1926.602(a)(2) SAE J386 1985 Society for Automotive Engineering Operator Restraint Systems for OffRoad Work Machines 30 CFR 56.14130(h) SAE J386 1993 Society of Automotive Engineers Operator Restraint Systems for OffRoad Work Machines 30 CFR 56.14130(h) SAE J386 1997 Society of Automotive Engineers Operator Restraint Systems for OffRoad Work Machines 30 CFR 57.14131(c) SAE J387 (pdf) SAE J387 (html) 1987 Society of Automotive Engineers Terminology: Motor Vehicle Lighting 49 CFR 571 SAE J394 1969 Society of Automotive Engineers Minimum Performance Criteria for Roll-Over Protective Structures for Rubber-Tired Front End Loaders and Rubber-Tired Dozers 30 CFR 77.403-1(d)(1) (ii) SAE J394 1972 Society of Automotive Engineers Minimum Performance Criteria for Rollover Protective Structures for Wheeled Front-End Loaders and Wheeled Dozers 30 CFR 77.403-1(d)(1) (ii) SAE J395 1969 Society of Automotive Engineers Minimum Performance Criteria for Roll-Over Protective Structures for 30 CFR 77.403-1(d)(1) (iii) https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 Crawler Tractors and Crawler-Type Loaders SAE J396 1972 Society for Automotive Engineering Minimum Performance Criteria for Roll-Over Protective Structures for Motor Graders 30 CFR 77.403-1(d)(1) (iv) SAE J397 1969 Society of Automotive Engineers Deflection Limiting VolumeProtective Structures Laboratory Evaluation 29 CFR 1926.1001(f)(1) (ii) SAE J397 1988 Society of Automotive Engineers Deflection Limiting VolumeProtective Structures Laboratory Evaluation 29 CFR 1910.266(f)(3) (iv) SAE J429 1971 Society for Automotive Engineering Mechanical and Quality Requirements for Externally Threaded Fasteners 30 CFR 77.403-1(d)(2) (iii)(B) SAE J429 1983 Society of Automotive Engineers Mechanical and Quality Requirements for Externally Threaded Fasteners 46 CFR 58.30-15(c) SAE J429D 1967 Society of Automotive Engineers Mechanical and Quality Requirements for Externally Threaded Fasteners 30 CFR 77.403-1(d)(2) (iii)(B) SAE J449a 1963 Society of Automotive Engineers Surface Texture Control 49 CFR 581.6(b)(1) SAE J476a 1961 Society of Automotive Engineers Dryseal Pipe Threads 49 CFR 393.67(c)(3) SAE J527 1967 Society of Automotive Engineers Brazed Double Wall Low Carbon Steel Tubing 49 CFR 571.116 S6.13.3(b) SAE J533 1972 Society of Automotive Engineers Flares for Tubing 24 CFR 3280.703 SAE J557 1968 Society of Automotive Engineers High Tension Ignition Cable 33 CFR 183.440(a) SAE J565 1969 Society of Automotive Engineers Semi-Automatic Headlamp Beam Switching Devices 49 CFR 571.108 S5.5.1 SAE J566 1960 Society of Automotive Engineers Headlamp Mountings 49 CFR 571.108 SAE J571 1976 Society of Automotive Engineers Dimensional Specification for Sealed Beam Headlamp Units 49 CFR 571.108 SAE J573d (pdf) SAE J573d (html) 1968 Society of Automotive Engineers Requirements for Lamp Bulbs and Sealed Units 49 CFR 571 SAE J575 1970 Society of Automotive Engineers Test for Motor Vehicle Lighting Devices and Components 49 CFR 571.108 S6.1 SAE J575 1983 Society for Automotive Engineering Test for Motor Vehicle Lighting Devices and Components 49 CFR 571.131 S6.2.3 SAE J575 1988 Society of Automotive Engineers Test for Motor Vehicle Lighting Devices and Components 49 CFR 571.108 S7.5.8.3(e) SAE J576 1970 Society of Automotive Engineers Plastic Materials for Use in Optical Parts, such as Lenses and Reflectors, of Motor Vehicle Lighting Devices 49 CFR 571.108 S6.2 SAE J576 (pdf) SAE J576 (html) 1991 Society of Automotive Engineers Plastic Materials for Use in Optical Parts 49 CFR 571 SAE J576B 1966 Society of Automotive Engineers Plastic Materials for Use in Optical Parts, such as Lenses and Reflectors, of Motor Vehicle Lighting Devices 49 CFR 571.108 S6.2 https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 SAE J578 (pdf) SAE J578 (html) 1995 Society of Automotive Engineers Color Specifications for Electric Signal Lighting Devices 49 CFR 571.403 SAE J584 1964 Society of Automotive Engineers Motorcycle and Motor Driven Cycle Headlamps 49 CFR 571.108 S7.9.1 (a) SAE J584 (pdf) SAE J584 (html) 1993 Society of Automotive Engineers Requirements for Motorcycle Headlamps 49 CFR 571 SAE J585 1970 Society for Automotive Engineering Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width 49 CFR 571.108 S5.8.8 SAE J585 1977 Society for Automotive Engineering Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width 49 CFR 571.108 S5.1.1.6 SAE J585 2000 Society of Automotive Engineers Tail Lamps (Rear Position Light) 49 CFR 571.108 S6.1 SAE J586 1970 Society of Automotive Engineers Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width 49 CFR 571.108 S5.8.3 (b) SAE J586 1984 Society for Automotive Engineering Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width 49 CFR 571.108 S6.1 SAE J586 2000 Society of Automotive Engineers Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width 49 CFR 571.108 S6.1 SAE J586B 1966 Society of Automotive Engineers Stop Lamps for Use on Motor Vehicles Less than 2032 mm in Overall Width 49 CFR 571.108 S5.8.3 (a) SAE J587 (pdf) SAE J587 (html) 1981 Society of Automotive Engineers License Plate Lamps (Rear Registration Lamps) 49 CFR 571 SAE J588 1970 Society for Automotive Engineering Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width 49 CFR 571.108 S5.1.1.1 SAE J588 1970 Society of Automotive Engineers Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width 49 CFR 571.108 S5.8.4 (b) SAE J588 (pdf) SAE J588 (html) 1984 Society of Automotive Engineers Requirements for Turn Signal Lamps 49 CFR 571 SAE J588 2000 Society of Automotive Engineers Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width 49 CFR 393.25(c) SAE J588D 1966 Society of Automotive Engineers Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width 49 CFR 571.108 S5.8.4 (a) SAE J592 1972 Society of Automotive Engineers Clearance, Side Marker and Identification Lamps 49 CFR 571.108 Table III SAE J592 (pdf) SAE J592 (html) 1992 Society of Automotive Engineers Clearance, Side Marker, and Identification Lamps 49 CFR 571 SAE J593C 1968 Society of Automotive Engineers Back-up Lamps 49 CFR 571.108 SAE J594f (pdf) SAE J594f (html) 1977 Society of Automotive Engineers Requirements for Reflex Reflectors 49 CFR 571 SAE J599 1997 Society of Automotive Engineers Lighting Inspection Code 49 CFR 581.5(c)(1) SAE J602 (pdf) SAE J602 (html) 1980 Society of Automotive Engineers Mechanically Aimable Sealed Beam Headlamps 49 CFR 571 https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 SAE J743A 1964 Society of Automotive Engineers Tractor Mounted Side Boom 29 CFR 1926.550(a) (18) SAE J759 (pdf) SAE J759 (html) 1995 Society of Automotive Engineers Lighting Identification Code 49 CFR 571 SAE J800C 1973 Society of Automotive Engineers Recommended Practice, Motor Vehicle Seat Belt Installations 49 CFR 571.209 SAE J826 1962 Society of Automotive Engineers Devices for Use in Defining and Measuring Vehicle Seating Accommodations 49 CFR 571.3(b) SAE J826 1980 Society for Automotive Engineering Devices for Use in Defining and Measuring Vehicle Seating Accommodations 49 CFR 571.214 S12.1.3(b)(1) SAE J826 (pdf) SAE J826 (html) 1995 Society of Automotive Engineers Defining and Measuring Vehicle Seating Accommodation 49 CFR 571 SAE J839 1991 Society of Automotive Engineers Passenger Car Side Door Latch System 49 CFR 571.206 SAE J839B 1965 Society of Automotive Engineers Passenger Car Side Door Latch System 49 CFR 571.201 SAE J845 1997 Society of Automotive Engineers Optical Warning Devices for Authorized Emergency, Maintenance and Service Vehicles 49 CFR 393.25(e) SAE J887 1964 Society of Automotive Engineers School Bus Red Signal Lamps 49 CFR 571.108 SAE J902A 1967 Society of Automotive Engineers Passenger Car Windshield Defrosting Systems 49 CFR 571.103 SAE J934 1965 Society of Automotive Engineers Recommended Practice for Vehicle Passenger Door Hinge Systems 49 CFR 571.206 SAE J942 1965 Society of Automotive Engineers Passenger Car Windshield Washer System 49 CFR 571.104 SAE J944 1980 Society for Automotive Engineering Steering Control SystemPassenger Car-Laboratory Test Procedure 49 CFR 571.203 S5.1 (a) SAE J945 1966 Society of Automotive Engineers Vehicular Hazard Warning Signal Flashers 49 CFR 571.108 Table I SAE J959 1966 Society of Automotive Engineers Lifting Crane Wire-Rope Strength Factors 29 CFR 1926.550(a)(7) (vi) SAE J964 1984 Society for Automotive Engineering Test Procedure for Determining Reflectivity of Rear View Mirrors 49 CFR 571.111 SAE J972 1966 Society of Automotive Engineers Moving Barrier Collision Test 49 CFR 571.105 SAE J995 1967 Society of Automotive Engineers Mechanical and Quality Requirements for Steel Nuts 30 CFR 77.403-1(d)(2) (iii)(B) SAE J995 1971 Society of Automotive Engineers Mechanical and Quality Requirements for Steel Nuts 30 CFR 77.403-1(d)(2) (iii)(B) SAE J1040 1994 Society of Automotive Engineers Performance Criteria for Rollover Protective Structures (ROPS) for Construction, Earthmoving, Forestry and Mining Machines 30 CFR 56.14130(b)(1) SAE J1063 1993 Society of Automotive Engineers Cantilevered Boom Crane Structures--Method of Test 29 CFR 1926.1433(c) SAE J1100 1984 Society for Automotive Engineering Motor Vehicle Dimensions 49 CFR 571.3(b) 2001 Society of Automotive Engineers Motor Vehicle Dimensions 49 CFR 571 https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 SAE J1100 (pdf) SAE J1100 (html) SAE J1127 1980 Society for Automotive Engineering Battery Cable 33 CFR 183.430(a)(2) (ii) SAE J1128 1975 Society of Automotive Engineers Low Tension Primary Cable 33 CFR 183.430(a)(2) (ii) SAE J1133 1984 Society for Automotive Engineering School Bus Stop Arm 49 CFR 571.131 S6.2.3 SAE J1151 1991 Society of Automotive Engineers Methane Measurement Using Gas Chromatography 40 CFR 86.111-94(b)(3) (vii) SAE J1194 1983 Society for Automotive Engineering Roll-Over Protective Structures for Wheeled Agricultural Tractors 30 CFR 56.14130(h) SAE J1194 1994 Society of Automotive Engineers Roll-Over Protective Structures for Wheeled Agricultural Tractors 30 CFR 56.14130(h) SAE J1194 1999 Society of Automotive Engineers Roll-Over Protective Structures for Wheeled Agricultural Tractors 30 CFR 57.14130(h) SAE J1228 1991 Society of Automotive Engineers Small Craft-Marine Propulsion Engine and Systems-Power Measurements and Declarations 40 CFR 91.115(a) SAE J1292 1981 Society of Automotive Engineers Automobile, Truck, Truck-Tractor, Trailer, and Motor Coach Wiring 49 CFR 393.28 SAE J1318 1986 Society of Automotive Engineers Gaseous Discharge Warning Lamp for Authorized Emergency, Maintenance, and Service Vehicles 49 CFR 393.25(e) SAE J1383 (pdf) SAE J1383 (html) 1985 Society of Automotive Engineers Performance Requirements for Motor Vehicle Headlamps 49 CFR 571 SAE J1395 (pdf) SAE J1395 (html) 1985 Society of Automotive Engineers Turn Signal Lamps for Use on Motor Vehicles 49 CFR 571 SAE J1398 (pdf) SAE J1398 (html) 1985 Society of Automotive Engineers Stop Lamps for Use on Motor Vehicles 49 CFR 571 SAE J1475 1984 Society for Automotive Engineering Hydraulic Hose Fittings for Marine Applications 46 CFR 27.211(e)(2)(v) (B) SAE J1527 1993 Society of Automotive Engineers Marine Fuel Hoses 33 CFR 183.540(a) SAE J1703 1983 Society for Automotive Engineering Motor Vehicle Brake Fluid 49 CFR 571.116 S6.5.4.1 SAE J1703 (pdf) SAE J1703 (html) 1995 Society of Automotive Engineers Motor Vehicle Brake Fluids 49 CFR 571 SAE J1733 (pdf) SAE J1733 (html) 1994 Society of Automotive Engineers Sign Convention for Vehicle Crash Testing 49 CFR 572 SAE J1817 2001 Society of Automotive Engineers Long Stroke Air Brake Actuator Marking 49 CFR 393.47(e) SAE J1850 1995 Society of Automotive Engineers Class B Data Communication Network Interface 40 CFR 86.099-17(h)(1) (i) SAE J1850 2001 Society of Automotive Engineers Class B Data Communication Network Interface 40 CFR 86.1806-05(h) (1)(i) SAE J1877 1994 Society of Automotive Engineers https://law.resource.org/pub/us/cfr/manifest.us.html 40 CFR 86.095-35(h)(2) (i) 12/19/2019 Recommended Practice for BarCoded Vehicle Identification Number Label SAE J1892 1993 Society of Automotive Engineers Recommended Practice for BarCoded Vehicle Emission Configuration Label 40 CFR 86.095-35(h)(2) (i) SAE J1930 1993 Society of Automotive Engineers Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms 40 CFR 1039.135(c)(8) SAE J1930 2002 Society of Automotive Engineers Electrical/Electronic Systems Diagnostic Terms, Definitions, Abbreviations, and Acronyms 40 CFR 86.1806-05(h) (1)(v) SAE J1937 1989 Society of Automotive Engineers Recommended Practice for Engine Testing with Low Temperature Charge Air Cooler Systems in a Dynamometer Test Cell 40 CFR 86.1330-90(b) (5) SAE J1962 1995 Society of Automotive Engineers Diagnostic Connector Equivalent to ISO/DIS 40 CFR 86.094-17(h)(4) SAE J1962 2002 Society of Automotive Engineers Diagnostic Connector Equivalent to ISO/DIS 15031 40 CFR 86.1806-05(h) (1)(iv) SAE J1978 2002 Society of Automotive Engineers OBD II Scan Tool Equivalent to ISO/DIS 15031-4 40 CFR 86.1806-05(h) (1)(vi) SAE J1979 2002 Society of Automotive Engineers E/E Diagnostic Test Modes 40 CFR 86.1806-05(h) (1)(ii) SAE J2009 (pdf) SAE J2009 (html) 1993 Society of Automotive Engineers Discharge Forward Lighting Systems 49 CFR 571 SAE J2012 2002 Society of Automotive Engineers Diagnostic Trouble Code Definitions 40 CFR 86.1806-04(h) (1)(iii) SAE J2040 2002 Society of Automotive Engineers Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall Width 9 CFR 393.25(c) SAE J2260 1996 Society of Automotive Engineers Non-metallic Fuel System Tubing with One or More Layers 40 CFR 1048.105(a)(2) SAE J2261 2002 Society of Automotive Engineers Stop Lamps and Front- and RearTurn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width 49 CFR 393.25(c) SAE J2534 2002 Society of Automotive Engineers Recommended Practice for PassThru Vehicle Programming 40 CFR 86.096-38(g) (17)(iv) SCTE 26 2010 Society of Cable Telecommunications Engineers Home Digital Network Interface Specification with Copy Protection 47 CFR 76.640(b)(4)(iii) SCTE 28 2007 Society of Cable Telecommunications Engineers Host-POD Interface Standard 47 CFR 15.123(b)(4) SCTE 40 2004 Society of Cable Telecommunications Engineers Digital Cable Network Interface Standard (2004) 47 CFR 15.123(b)(2) SCTE 40 2011 Society of Cable Telecommunications Engineers Digital Cable Network Interface Standard (2011) 47 CFR 15.123(b)(2) SCTE 41 2011 Society of Cable Telecommunications Engineers POD Copy Protection System 47 CFR 76.640(b)(2)(ii) https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 SCTE 54 2009 Society of Cable Telecommunications Engineers Digital Video Service Multiplex and Transport System Standard for Cable Television 47 CFR 15.123(b)(3) SCTE 65 2008 Society of Cable Telecommunications Engineers Service Information Delivered Outof-Band for Digital Cable Television 47 CFR 76.640(b)(1)(ii) SEAC 1996 Structural Engineers Association of California Recommended Lateral Force Requirements and Commentary including Errata 42 CFR 52b.12(c)(5) SJI 1994 Steel Joist Institute Standard Specification Load Tables and Weight Tables for Steel Joists and Joist Girders 24 CFR 3280.304(b)(1) SMACCNA HVAC (pdf) SMACCNA HVAC (html) SMACCNA HVAC (svg) 1985 Sheet Metal and Air Conditioning Contractors National Association SMACNA: HVAC Air Duct Leakage Test Manual 10 CFR 434.403.2.9.3 SMACCNA DUCT (pdf) SMACCNA DUCT (html) SMACCNA DUCT (svg) 1995 Sheet Metal and Air Conditioning Contractors National Association SMACCNA: HVAC Duct Construction Standards -- Metal and Flexible (RS-34) 10 CFR 434.403.2.9.3 SMACCNA GLASS (pdf) 1992 Sheet Metal and Air Conditioning Contractors National Association SMACCNA: Fibrous Glass Duct Construction Standards (RS-36) 10 CFR 434.403.2.9.3 SMACCNA AIR (pdf) 1978 Sheet Metal and Air Conditioning Contractors National Association SMACCNA: Energy Recovery Equipment and Systems, Air-to-Air 10 CFR 440 Appendix A NIST Handbook H-28 1942 Department of Commerce Handbook of Screw-Thread Standards for Federal Service 49 CFR 178.45(f)(5)(ii) DOD AFTO 11A1-47 1988 Department of Defense Explosive Hazard Classification Procedures 49 CFR 173.56(b)(2)(i) FedSpec RR-C901D 2003 Department of Transportation Cylinders, Compressed Gas: High Pressure, Steel DOT 3AA, and Aluminum Applications 49 CFR 173.302(b)(3) RTCA 23-63 1963 Radio Technical Commission for Aeronautics Standard Adjustment Criteria for Airborne Localizer and Glide Slope Receivers 14 CFR 91 App. A, 3(a) (1) SNELL B-90 1998 Snell Memorial Foundation Standard for Protective Headgear for Use in Bicycling 16 CFR 1203.53(a)(4) SNELL B-95 1998 Snell Memorial Foundation Standard for Protective Headgear for Use in Bicycling 16 CFR 1203.53(a)(7) SRCC OG-300 2008 Solar Rating and Certification Corporation Operating Guidelines and Minimum Standards for Certifying Solar Water Heating Systems 24 CFR 200.950(a)(1) TPI 1985 Truss Plate Institute Design Specifications for Metal Plate Connected Wood Trusses 24 CFR 3280.304(b)(1) TTMA RP-61 1998 Truck Trailer Manufacturers Association Performance of Manhole and/or Fill Opening Assemblies 49 CFR 180.405(g)(2)(i) TTMA RP-81 1997 Truck Trailer Manufacturers Association Performance of Spring Loaded Pressure Relief Valves 49 CFR 178.345-10(b) (3)(i) https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 TTMA RP-107 1998 Truck Trailer Manufacturers Association Procedure for Testing In-Service Unmarked and/or Uncertified MC 306 and Non-ASME MC 312 Type Cargo Tank Manhole 49 CFR 180.405(g)(2)(i) UL 17 1988 Underwriters Laboratories Vent or Chimney Connector Dampers for Oil-Fired Appliances 10 CFR 440 Appendix A UL 38 1993 Underwriters Laboratories Standard for Manually Actuated Signaling Boxes for Use with FireProtective Signaling Systems 46 CFR 161.002-4(b)(1) UL 44 2002 Underwriters Laboratories Standard for Thermoset-Insulated Wire and Cable 46 CFR 110.10-1 UL 50 1995 Underwriters Laboratories Standard for Enclosures for Electrical Equipment 46 CFR 111.81-1(d) UL 62 1997 Underwriters Laboratories Standard for Flexible Cord and Fixture Wire 46 CFR 110.10-1 UL 127 1996 Underwriters Laboratories Factory-Built Fireplaces 24 CFR 3280 UL 142 (pdf) UL 142 (html) 1968 Underwriters Laboratories Steel Above Ground Tanks for Flammable and Combustible Liquids 49 CFR 1910 UL 174 1989 Underwriters Laboratories Household Electric Storage Tank Water Heaters 46 CFR 63.25-3(a) UL 217 1993 Underwriters Laboratories Single and Multiple Station Smoke Detectors 46 CFR 181.450(a)(1) UL 486A 1990 Underwriters Laboratories Wire Connections and Soldering Lugs for Use With Copper Conductors 46 CFR 175.600 UL 521 1993 Underwriters Laboratories Heat Detectors for Fire Protective Signaling Systems 46 CFR 161.002-4(b)(1) UL 727 1994 Underwriters Laboratories Oil-Fired Central Furnaces 10 CFR 431.76(c)(1) UL 746C 1995 Underwriters Laboratories Polymeric Material--Use in Electrical Equipment Evaluations 16 CFR 1211.10(e)(2) UL 913 1988 Underwriters Laboratories Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III Division 1, Hazardous (Classified) Locations 46 CFR 111.105-11(a) UL 991 1995 Underwriters Laboratories Tests for Safety-Related Controls Employing Solid-State Devices 16 CFR 1211.4(c) UL 1042 1995 Underwriters Laboratories Electric Baseboard Heating Equipment 24 CFR 3280.703 UL 1072 1995 Underwriters Laboratories Standard for Medium-Voltage Power Cables 46 CFR 111.60-1(e) UL 1096 1986 Underwriters Laboratories Electrical Central Air Heating Equipment 24 CFR 3280.703 UL 1104 1983 Underwriters Laboratories Standard for Marine Navigation Lights 46 CFR 120.420 UL 1426 1986 Underwriters Laboratories Cables for Boats 33 CFR 183.435(a)(4) UL 1570 1995 Underwriters Laboratories Fluorescent Lighting Fixtures 46 CFR 183.410(d) UL 1571 1995 Underwriters Laboratories Incandescent Lighting Fixtures 46 CFR 111.75-20(e) UL 1572 1995 https://law.resource.org/pub/us/cfr/manifest.us.html 46 CFR 120.410(d) 12/19/2019 Underwriters Laboratories High Intensity Discharge Lighting Fixtures UL 1574 1995 Underwriters Laboratories Track Lighting Systems 46 CFR 111.75-20(e) UL 1995 1995 Underwriters Laboratories Heating and Cooling Equipment, Second Edition, with 1999 revisions 24 CFR 3280.4 UN ECE 1996 United Nations Economic Commission of Europe Uniform Provisions Concerning the Approval of Vehicles with Regard to the Installation of Lighting and Light-Signaling Devices 49 CFR 571.108 UN ESC 2009 United Nations Economic and Social Council Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria 49 CFR 173.128(c)(3) UN ESC 2005 United Nations Economic and Social Council Recommendations on the Transport of Dangerous Goods 49 CFR 173.40(d)(2) FAO 4 1995 UN Food and Agriculture Organization Requirements for the Establishment of Pest-free Areas 7 CFR 319.56 IAEA Circular 225 1999 International Atomic Energy Agency Physical Protection of Nuclear Material and Nuclear Facilities 10 CFR 110.44(b)(1) IAEA TS-R-1 2009 International Atomic Energy Agency Regulations for the Safe Transport of Radioactive Material 49 CFR 171.23 IMO Resolution A.264 1960 International Maritime Organization Amendment to Chapter VI of the International Convention for the Safety of Life at Sea 46 CFR 172.015(a)(2) IMO Resolution A.265 1973 International Maritime Organization Carriage of Grain 46 CFR 170.135(a) IMO Resolution A.342 1975 International Maritime Organization Recommendations on Performance Standards for Automatic Pilots 33 CFR 164.13(d)(1) IMO Resolution A.414 1979 International Maritime Organization Code for Construction and Equipment of Mobile Offshore Drilling Units 33 CFR 143.207(c) IMO Resolution A.520 1983 International Maritime Organization Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements 46 CFR 108.105(c)(1) IMO Resolution A.525 1983 International Maritime Organization Performance Standards for Narrowband Direct Printing Telegraph Equipment for the Reception of Navigational and Meteorological Warnings 47 CFR 80.1101(c)(1)(i) IMO Resolution A.601 1987 International Maritime Organization Provision and Display of Manoeuvering Information on Board Ships 33 CFR 157.450 IMO Resolution A.649 1991 International Maritime Organization Code for the Construction and Equipment of Mobile Offshore Drilling Units (MODU Code) 46 CFR 108.503 IMO Resolution A.654 1989 International Maritime Organization Graphical Symbols for Fire Control Plans 46 CFR 109.563(a)(6) IMO Resolution A.657 1989 International Maritime Organization Instructions for Action in Survival Craft 46 CFR 160.151-21(v) (3) IMO Resolution A.658 1989 International Maritime Organization Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances 46 CFR 108.645(a)(4) https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 IMO Resolution A.662 1989 International Maritime Organization Performance Standards for FloatFree Release and Activation Arrangements for Emergency Radio Equipment 47 CFR 80.1101(c)(11) (ii) IMO Resolution A.664 1989 International Maritime Organization Performance Standards for Enhanced Group Call Equipment 47 CFR 80.1101(c)(10) IMO Resolution A.688 1991 International Maritime Organization Fire Test Procedures for Ignitability of Bedding Components 46 CFR 116.405(j)(2) IMO Resolution A.689 1996 International Maritime Organization Recommendation on Testing LifeSaving Appliances 46 CFR 160.151-21(f) IMO Resolution A.694 1991 International Maritime Organization General Requirements for Shipborne Radio Equipment Forming Part of the Global Maritime Distress and Safety System and for Electronic Navigational Aids 47 CFR 80.1101(b)(1) IMO Resolution A.700 1991 International Maritime Organization Performance Standards for Narrowband Direct-printing Telegraph Equipment for the Reception of Navigational and Meteorological Warnings and Urgent Information to Ships 47 CFR 80.1101(c)(4) (iv) IMO Resolution A.739 1993 International Maritime Organization Guidelines for the Authorization of Organizations Acting on Behalf of the Administration 33 CFR 96.440(a)(12) IMO Resolution A.741 1993 International Maritime Organization International Management Code for the Safe Operation of Ships and for Pollution Prevention 33 CFR 96.220(b) IMO Resolution A.744 1993 International Maritime Organization Guidelines on the Enhanced Program of Inspections During Surveys of Bulk Carriers and Oil Tankers 33 CFR 157.430(a) IMO Resolution A.751 1994 International Maritime Organization Interim Standards for Ship Manoeuverability 33 CFR 157.445(a) IMO Resolution A.753 1993 International Maritime Organization Guidelines for the Application of Plastic Pipe on Ships 46 CFR 56.60-25(a) IMO Resolution A.760 1993 International Maritime Organization Symbols Related to Life-Saving Appliances and Arrangements 46 CFR 108.646(a) IMO Resolution A.788 1995 International Maritime Organization Guidelines on Implementation of the International Safety Management (ISM) Code by Administrations 33 CFR 96.320(c)(2) IMO Resolution A.802 1995 International Maritime Organization Performance Standards for Survival Craft Radar Transponders for Use in Search and Rescue Operations 47 CFR 80.1101(c)(6)(i) IMO Resolution A.803 1995 International Maritime Organization Performance Standards for Shipborne VHF Radio Installations Capable of Voice Communication and Digital Selective Calling 47 CFR 80.1101(c)(2)(i) IMO Resolution A.804 1995 International Maritime Organization Performance Standards for Shipborne MF Radio Installations Capable of Voice Communication and Digital Selective Calling 47 CFR 80.1101(c)(3)(i) IMO Resolution A.806 1995 International Maritime Organization Performance Standards for Shipborne MF/HF Radio Installations Capable of Voice Communication, Narrow-Band 47 CFR 80.1101(c)(4)(i) https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019 Direct Printing and Digital Selective Calling IMO Resolution A.807 1995 International Maritime Organization Performance Standards for INMARSAT Standard-C Ship Earth Stations Capable of Transmitting and Receiving Direct-Printing Communications 47 CFR 80.1101(c)(9) IMO Resolution A.808 1995 International Maritime Organization Performance Standards for Ship Earth Stations Capable of TwoWay Communications 47 CFR 80.1101(c)(8) IMO Resolution A.809 1995 International Maritime Organization Performance Standards for Survival Craft Two-Way VHF Radiotelephone Apparatus 47 CFR 80.1101(c)(7)(i) IMO Resolution A.810 1995 International Maritime Organization Performance Standards for Floatfree Satellite Emergency PositionIndicating Radio Beacons (EPIRBs) Operating on 406 MHz 47 CFR 80.1101(c)(5)(i) IMO Resolution A.812 1995 International Maritime Organization Performance Standards for FloatFree Satellite EPIRBs Operating Through the Geostationary INMARSAT Satellite System on 1.6 GHz 47 CFR 80.1101(c)(11) (i) USEC 651 1995 United States Enrichment Corporation Good Handling Practices for Uranium Hexafluoride 49 CFR 173.417(a)(3)(i) USPHS 934 1962 U.S. Public Health Service Food Service Sanitation Ordinance and Code 29 CFR 1910.142(i)(1) USPHS 956 1962 U.S. Public Health Service Drinking Water Standards 46 CFR 160.026-4(a) USPHS 934 1962 U.S. Public Health Service Food Service Sanitation Ordinance and Code 29 CFR 1910.142(i)(1) USPHS 9 2003 U.S. Public Health Service The Ships Medicine Chest and Medical Aid at Sea 33 CFR 143.405(a)(15) WCLIB R17 2004 West Coast Lumber Inspection Bureau Grading Rules for West Coast Lumber 7 CFR 1728.201(f)(1)(i) WHO 1973 World Health Organization Laboratory Techniques in Rabies 9 CFR 113.209(d)(3) WIPO ST.25 2001 World Intellectual Property Organization Handbook on Industrial Property Information and Documentation 37 CFR 1.821(a)(1) WQA S-100 1985 Water Quality Association Water Softeners 24 CFR 200, Subpart S WQA S-200 1988 Water Quality Association Water Filters 24 CFR 200, Subpart S WQA S-300 1984 Water Quality Association Point-of-Use, Low Pressure Reverse Osmosis Drinking Water Systems 24 CFR 200, Subpart S WQA S-400 1986 Water Quality Association Point-of-Use Distillation Drinking Water Systems 24 CFR 200, Subpart S WSTDA T-1 2005 Web Sling and Tiedown Association Recommended Standard Specification for Synthetic Web Tiedowns 49 CFR 393.104(e)(3) Last Updated: December 31, 2012 ↑ Published by Public.Resource.Org https://law.resource.org/pub/us/cfr/manifest.us.html 12/19/2019

Disclaimer: Justia Dockets & Filings provides public litigation records from the federal appellate and district courts. These filings and docket sheets should not be considered findings of fact or liability, nor do they necessarily reflect the view of Justia.

Why Is My Information Online?